Viglen Integra User manual

..
Integra
Included fittings Your Viglen Integra has been shipped with a multi-purpose screw pack. You may not need
to use all the screws in the pack to complete this assembly. You will require the screws
shown below:
Step 2 Attach the Monitor
Step 3 Connect Cables
Screw A Screw B Screw C
( x 1) ( x 2 ) ( x 3 )
Screw J
(pre-fitted to
monitor stand)
( x 1 )
Tools required
Cross-head (philips-head) screwdriver
Optional security screwdriver (order EMSECDRV from Viglen)
Included cables
Depending on your configuration you will receive one split power
cable for the base unit and monitor and one or more of the
following cables: video, audio.
Integra Start Guide 2013-03
Slide the locking catch on the cable
cover up and slide the cover to the
left to remove the cable cover.
Push the metal locking catch to the
right and slide the plastic back cover
straight upwards. Lift the cover away
from the base unit.
Optional - Slide the middle section of
the side panel to the rear to provide
additional access to the cable bay.
Take care when loosening the
monitor stand screw
The monitor stand contains a strong spring under pressure.
Apply firm pressure to the top of the monitor bracket
before unscrewing Anchor Screw J.
Fix 2x Screw B (lug screw) to the lower VESA mounting holes
in the rear of the monitor. Refer to your monitor manual for
instructions on how to remove the monitor’s stand.
Unlock the cable window in the base unit and feed the
monitor signal and power cables through. Place the
monitor face down in front of the base unit and connect
the monitor cables.
Lift the monitor onto the monitor stand VESA bracket and
hang the monitor by engaging the lug screws in the lower
holes.
Hold the monitor in place and secure it using 2x Screw C.
Connect the monitor signal cable, mouse, keyboard and
other accessories.
Secure the mouse, keyboard, power and other external
cables using the cable strap at the bottom of the cable bay.
Optional: Cables can be channelled via the routing clips at
the base of the unit.
Optional: Replace the side panel of the cable bay.
Replace the back cover by applying it flat to the back of
the base unit, engaging its lugs and pushing firmly
downwards.
Replace the cable cover by sliding it from the left until it
locks in place.
Care should be taken to ensure that all cables are
routed through the cable window below the cable cover.
Optional: Fit 1x Security Screw A into the locking clip to
deter unauthorised opening.
Optional: Fit a Kensington-style locking cable or clip to lock
the cover and secure the Viglen Integra to the desktop.
12
1
2
3
3
1
1
2
3
3
2
4
1
1
2
3
3
1
2
1
2
4
5
5
4
4
4
3
3
1
2
1 2
Contents Base Unit Monitor
2
Step 4 Replace the Back Cover
Step 1 Remove the Back Cover
x2
x2
x1
K
WARNING
Compressed Spring
Apply firm pressure to
the top of the monitor
bracket before
loosening anchor screw
Viglen recommends Windows 8.
Viglen Getting Started Guide
CAUTION!

TECHNICAL SUPPORT
If you have any queries concerning the following:
1. Hardware configuration problems;
2. You wish to return your hardware for repair or arrange
a service visit (subject to contract);
3. You have installation or set-up difficulties;
4. You require additional drivers;
Please call our TECHNICAL SUPPORT department on
01727 201 850
CUSTOMER CARE
If you have any queries concerning the following:
1. Parts missing or damaged from your Viglen PC order;
2. Incorrect goods supplied against your Viglen PC order;
3. Any complaint with a courier or delivery in general;
4. Collection of any computers or parts;
5. You wish to return your Viglen PC for an upgrade;
6. You wish to know the status of any returned Viglen PC;
Please call our CUSTOMER CARE department on
01727 201 810
SPARES AND UPGRADES
If you have any queries concerning the following:
1. You have ordered or wish to order spare parts;
2. You require information on upgrading new or old
systems;
Please call our SERVICE SALES department on
01727 201 815
24 HOUR ASSISTANCE
If you require assistance outside of office hours, you may
be able to find the information you require on our technical
support website.
Drivers, Manuals and Information Guides
www.viglen.co.uk/support
If you know which drivers you require you may visit our FTP
site for direct downloads:
http://download.viglen.co.uk/
REPLACEMENT SCREWS
All Viglen All-in-One PCs are shipped with a bag containing
all the screws required for assembly, as well as appropriate
anti-tamper screws for the cable cover. Note that screws for
bulk-packed PCs will be shipped in a single carton. Please
keep unused screws in a safe place as you may be liable for
an administration charge should you require replacements.
PARS1N02 Assembly Screws for Viglen Integra
Viglen Getting Started Guide
Getting Help from Viglen
Please read this pamphlet before switching on the Viglen PC and store in a
safe place. For further information regarding your Viglen PC please refer to
the Viglen Driver CD which Includes the Drivers and Manual for your
motherboard.
Important
Images shown are for illustrative purposes only. Although Viglen endeavours to ensure the accuracy of this information, Viglen cannot be held liable for any damages whatsoever for errors or omissions of fact
herein. Viglen is a trademark of Viglen Ltd, Viglen Ltd is a subsidiary of Viglen Technology Ltd. Viglen, the Viglen V logo, Great Minds Think Viglen, IT’s Personal, Genie, Contender, Envy, Dossier, Futura, Omnino,
Integra and Vigstor are registered trademarks of Viglen Limited. Celeron, Celeron Inside, Centrino, Centrino Logo, Core Inside, Intel, Intel Logo, Intel Core, Intel Inside, Intel Inside Logo, Intel SpeedStep, Intel Viiv,
Itanium, Itanium Inside, Pentium, Pentium Inside, Xeon, Xeon Inside, and vPro are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Microsoft
and Windows are registered trademarks of Microsoft Corporation. All other trademarks are acknowledged. Subject to Viglen terms and conditions available on request.
Viglen Limited,
VHQ,
7 Handley Page Way,
Old Parkbury Lane,
Colney Street, St. Albans,
Hertfordshire,
AL2 2DQ
Corporate Sales 01727 201 830
Education Sales 01727 201 860
Public Sector Sales 01727 201 830
Schools Sales 01727 201 820
Email [email protected]
Web www.viglen.co.uk/startguides