Viglen Vig760S User manual

Vig760s
Motherboard
Manual
C O M P U T E R S N E T W O R K S S O L U T I O N S
..
Vig760S
Motherboard
Manual

2
V1.0 Vig760S Motherboard Manual
Viglen, EMC and the ‘CE’ mark
CE Marking
European standards are being harmonised across borders. If products comply with
the same standards in all European countries, product exporting and importing is
made simple - paving our way to a common market. If you buy a product with a 'CE'
mark on it (shown below), on the box, in the manual, or on the guarantee - it complies
with the currently enforced directive(s).
Introduction to EMC
EMC (Electromagnetic Compatibility) is the term used to describe certain issues with
RF (Radio Frequency) energy. Electrical items should be designed so they do not
interfere with each other through RF emissions. El.g. If you turn on your microwave,
your television shouldn't display interference if both items are CE marked to the EMC
directive.
If emitted RF energy is not kept low, it can interfere with other electrical circuitry - E.g.
Cars Automatic Braking Systems have been known to activate by themselves while in
a strong RF field. As this has obvious repercussions ALL electrical products likely to
cause RF related problems have to be 'CE' marked from 1st January 1996 onwards.
If a product conforms to the EMC directive, not only should its RF emissions be very
low, but its immunity to RF energy (and other types) should be high. The apparatus
has to resist many 'real world' phenomena such as static shocks and mains voltage
transients.

3
V1.0 Vig760S Motherboard Manual
Viglen’s Environment laboratory
To gain a 'CE' mark, the Viglen computer range has had to undergo many difficult
tests to ensure it is Electromagnetically Compatible. These are carried out in the in-
house 'Environment lab' at Viglen Headquarters. We have made every effort to
guarantee that each computer leaving our factory complies fully with the correct
standards. To ensure the computer system maintains compliance throughout its
functional life, it is essential you follow these guidelines.
Install the system according to Viglen’s instructions
If you open up your Viglen:
Keep internal cabling in place as supplied.
Ensure the lid is tightly secured afterwards
Do not remove drive bay shields unless installing a 'CE' marked peripheral in its
place
The clips or ‘bumps' around the lips of the case increase conductivity - do not
remove or damage.
Do not remove the ferrite ring from the L.E.D cables.
Only use your Viglen computer with 'CE' marked peripherals
This system has been tested in accordance with European standards for use in
residential and light industrial areas-this specifies a 10 meter testing radius for
emissions and immunity. If you do experience any adverse effects which you think
might be related to your computer, try moving it at least 10 meters away from the
affected item. If you still experience problems, contact Viglen’s Technical Support
department who will put you straight through to an EMC engineer - s/he will do
everything possible to help. If modifications are made to your Viglen computer system,
it might breach EMC regulations. XMA take no responsibility (with regards to EMC
characteristics) of equipment which has been tampered with or modified.
This symbol on the product or on its packaging indicates that the product
shall not be collection point for recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human
health, which could be treated as household waste. Instead it shall be
handed over to the applicable otherwise be caused by inappropriate waste handling of
this product. The recycling of materials will help to conserve natural resources. For
more detailed information about recycling of this product, please contact your local city
office, your household waste disposal service or XMA Ltd.
Copyrights and Trademarks
Please note
The material in this manual is subject to change without notice.

4
V1.0 Vig760S Motherboard Manual
Trademarks
Microsoft, Windows 7, Windows 8/8.1, Windows 10 and MS-DOS are registered
trademarks of Microsoft Corporation. IBM PC, XT, AT and PS/2 are trademarks of
International Business Machines Corporation. Core i3/i5/i7TM and Pentium® are
registered trademarks of Intel® Corporation. All other trademarks are acknowledged.
Genie, Vig, Viglen, and Omnino are trademarks of XMA Limited.
Copyright and Patents
This manual and all accompanying software and documentation are copyrighted and all
rights reserved. This product, including software and documentation, may not, in whole
or in part, be copied, photocopied, translated or reduced to any electronic or machine-
readable form, without prior written consent except for copies retained by the purchaser
for backup.
© Copyright 2016 XMA Limited
All Rights Reserved
Vig760S Manual Version 1.0
Liability
No warranty or representation, either expressed or implied, is made with respect to
this documentation, its quality, performance, merchantability or fitness for a particular
purpose. As a result, the documentation is licensed as is, and you, the licensee, are
assuming the entire risk as to its quality and performance. The vendor reserves the
right to revise this operation manual and all accompanying software and
documentation and to make changes in the content without obligation to notify any
person or organisation of the revision or change.
In no event will the vendor be liable for direct, indirect, special, incidental or
consequential damages arising out of the use or inability to use this product or
documentation, even if advised of the possibility of such damages. In particular, the
vendor shall not have liability for any hardware, software or data stored or used with
the product, including the costs of repairing, replacing or recovering such hardware,
software or data.

5
V1.0 Vig760S Motherboard Manual
Contents
CE Marking .............................................................................................................................2
Introduction to EMC ..............................................................................................................2
Viglen’s Environment laboratory ...........................................................................................3
Please note.............................................................................................................................3
Trademarks ............................................................................................................................4
Copyright and Patents............................................................................................................4
Liability...................................................................................................................................4
Chapter 1 Motherboard Overview.................................................................................... 8
Introduction.....................................................................................................................8
Feature Summary ............................................................................................................9
1.2.1 Form factor: ..............................................................................................................9
1.2.2 Processor: .................................................................................................................9
1.2.3 Chipset ......................................................................................................................9
1.2.4 Memory ....................................................................................................................9
1.2.5 Graphics ....................................................................................................................9
1.2.6 Audio.........................................................................................................................9
1.2.7 LAN............................................................................................................................9
1.2.8 SATA..........................................................................................................................9
1.2.9 Internal Connectors................................................................................................10
1.2.10 Expansion Capabilities.........................................................................................10
1.2.11 Rear I/O Ports......................................................................................................10
System Board Connectors..............................................................................................11
1.3.1 (1) CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN)................12
1.3.2 (2) ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)...............................12
1.3.3 (3) Intel® LGA1151 CPU socket .............................................................................12
1.3.4 (4) DDR4 DIMM slots ............................................................................................12
1.3.5 (5) Speaker connector (4-pin SPEAKER)................................................................12
1.3.6 (6) System panel connector (10-1 pin PANEL).......................................................12
1.3.7 (7) USB 3.0 connector (20-1 pin USB3_12)............................................................13
1.3.8 (8) Intel® H110 Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1~4) ...................13
1.3.9 (9) PCI Express 3.0/2.0 x16 slot .............................................................................13
1.3.10 (10) Chassis intrusion connector (4-1 pin CHASSIS)...........................................13
1.3.11 (11) Clear RTC RAM (2-pin CLRTC).......................................................................14
1.3.12 (12) Front panel audio connector (10-1 pin AAFP) .............................................14
1.3.13 (13) Serial port connector (10-1 pin COM1) .......................................................14

6
V1.0 Vig760S Motherboard Manual
1.3.14 (14) PM connector (14-1 pin TPM)......................................................................14
1.3.15 (15) USB 2.0 connector (10-1 pin USB910) .........................................................15
Rear panel connectors...................................................................................................16
1.4.1 (1) PS/2 mouse/keyboard combo port..................................................................16
1.4.2 (2) Video Graphics Adapter (VGA) port. .................................................................16
1.4.3 (3) LAN (RJ-45) port. ..............................................................................................17
1.4.4 (4) Line In port (light blue)......................................................................................17
1.4.5 (5) Line Out port (lime) ...........................................................................................17
1.4.6 (6) Microphone port (pink).....................................................................................17
1.4.7 (7) USB 2.0 ports.....................................................................................................18
1.4.8 (8) USB 3.0 ports.....................................................................................................18
1.4.9 (9) DVI-D port..........................................................................................................18
1.4.10 (10) HDMI port. ...................................................................................................18
Chapter 2 - System Board Options .................................................................................. 19
Upgrades .......................................................................................................................19
Upgrade Procedures......................................................................................................20
2.2.1 Upgrading the CPU .................................................................................................20
2.2.2 Installing & Removing Memory Modules...............................................................25
PCI Express 3.0/2.0 x16 slots ...............................................................................................27
Chapter 3 Solving Problems......................................................................................... 28
Technical Support ..........................................................................................................28
3.1.1 Technical Support contact details ..........................................................................28
3.1.2 Resetting the System..............................................................................................28
Troubleshooting Procedures..........................................................................................29
Problems & Suggestions................................................................................................30
Chapter 4 System BIOS ................................................................................................... 32
What is the BIOS?..........................................................................................................32
The Power-On sequence................................................................................................32
Managing and updating BIOS .......................................................................................33
4.3.1 Introduction............................................................................................................33
4.3.2 BIOS Update Instructions under DOS .....................................................................33
4.3.3 BIOS Update Instructions using EZ-Flash Method..................................................34
4.3.4 Recovering the BIOS - CrashFree BIOS 3 ................................................................35
BIOS Setup Program ......................................................................................................36

7
V1.0 Vig760S Motherboard Manual
4.4.1 Entering BIOS Setup................................................................................................36
4.4.2 EZ Mode..................................................................................................................37
Advanced Mode.............................................................................................................38
4.5.1 My Favourites .........................................................................................................39
4.5.2 Main menu..............................................................................................................40
4.5.2.1 System Language [English]...............................................................................40
4.5.2.2 System Date [Day xx/xx/xxxx]..........................................................................40
4.5.2.3 System Time [xx:xx:xx].....................................................................................40
4.5.2.4 Security ............................................................................................................41
4.5.3 Ai Tweaker menu....................................................................................................43
4.5.4 Advanced Menu Screen..........................................................................................44
4.5.4.1 CPU Configuration............................................................................................44
4.5.4.2 Platform Misc Configuration............................................................................45
4.5.4.3 System Agent (SA) Configuration.....................................................................45
4.5.4.4 PCH Configuration............................................................................................46
4.5.4.5 USB Configuration............................................................................................46
4.5.4.6 Onboard Devices Configuration.......................................................................47
4.5.4.7 APM Configuration...........................................................................................47
4.5.4.8 Network Stack Configuration...........................................................................48
4.5.4.9 HDD/SSD SMART Information..........................................................................48
4.5.5 Monitor menu.........................................................................................................48
4.5.6 Boot menu ..............................................................................................................49
4.5.7 Tools menu .............................................................................................................50
4.5.8 Exit menu................................................................................................................51
4.5.8.1 Load Optimized Defaults..................................................................................51
4.5.8.2 Save Changes & Reset......................................................................................51
4.5.8.3 Discard Changes & Exit ....................................................................................51
ASUS EZ Mode ...............................................................................................................52
4.6.1 Windows UEFI mode for Windows 8/8.1 ...............................................................53
4.6.2 Enabling Windows UEFI mode for Windows 8/8.1 Operating System...................54
4.6.3 BIOS Settings for Windows 7 Operating System (Non UEFI Mode) .......................57
4.6.4 Boot\Secure Boot Menu.........................................................................................57
Chapter 5 :Suggestions ................................................................................................... 58
Questionnaire ................................................................................................................58
Notes .............................................................................................................................60

8
V1.0 Vig760S Motherboard Manual
Chapter 1 Motherboard Overview
Introduction
This manual describes the Viglen Vig760S motherboard inside your computer. The
motherboard is the most important part of your computer. It contains the CPU,
memory and graphics circuitry that make the computer work in the correct manner.
The Vig760S motherboard is a Mini ITX form factor offering legacy to premium
features. PS/2 mouse/keyboard combo port, integrated Graphics via VGA, DVI,
DisplayPort and HDMI, High Definition Audio via 3 flexible audio jacks and integrated
10/100/1000 network connection, as well as 4 USB 2.0 and 2 USB 3.0 ports to enrich
your multimedia creation experience.
The Vig760S Motherboard supports 6th generation Intel Core i3, i5, and i7 processors,
as well as being Microsoft Windows 7, 8.1 and Windows 10 WHQL certified.
This manual contains technical information about the Viglen Vig760S motherboard
and other hardware components inside your computer. If you are new to computers,
we recommend that you read the user guide first. If you are an experienced computer
user, this manual should provide all the information you will need to perform simple
upgrades and maintenance.
We hope that this manual is both readable and informative. If you have any comments
for suggestions about how we could improve the format, then please fill out the form at
the back of the manual and send it to us.
Above all we hope that you enjoy using your Viglen computer.
Chapter 2 Motherboard
Form factor
Atx

9
V1.0 Vig760S Motherboard Manual
Feature Summary
2.2.1 Form factor:
Mini ITX Form Factor 6.7 inch x 6.7 inch ( 17 cm x 17 cm )
2.2.2 Processor:
Intel® for 6th Generation Core™ i7/Core™ i5/Core™ i3/Pentium®/Celeron®
Processors
Supports Intel® 14 nm CPU
Supports Intel® Turbo Boost Technology 2.0
The Intel® Turbo Boost Technology 2.0 support depends on the CPU types.
2.2.3 Chipset
Intel® H110 Express Chipset
2.2.4 Memory
2 x DIMM, Max. 32GB, DDR4 2133 MHz Non-ECC, Un-buffered Memory
Supports Intel® Extreme Memory Profile (XMP)
2.2.5 Graphics
Integrated Graphics Processor- Intel® HD Graphics support
Multi-VGA output support : HDMI/DVI-D/RGB ports
- Supports HDMI with max. resolution 4096 x 2160 @ 24 Hz / 2560
x 1600 @ 60 Hz
- Supports DVI-D with max. resolution 1920 x 1200 @ 60 Hz
- Supports RGB with max. resolution 1920 x 1200 @ 60 Hz
Maximum shared memory of 1024 MB
Supports Intel® InTru™ 3D, Quick Sync Video, Clear Video HD
Technology, Insider™
Supports up to 2 displays simultaneously
2.2.6 Audio
Realtek® ALC887 7.1-Channel High Definition Audio CODEC *1
Supports: Jack-detection, Front Panel Jack-retasking
2.2.7 LAN
Realtek® RTL8111H, 1 x Gigabit LAN Controller(s)
2.2.8 SATA
4 x SATA 6Gb/s connector(s)

10
V1.0 Vig760S Motherboard Manual
2.2.9 Internal Connectors
1 x USB 3.0 connector(s) support(s) additional 2 USB 3.0 port(s)
1 x USB 2.0 connector(s) support(s) additional 2 USB 2.0 port(s)
1 x COM port(s) connector(s)
4 x SATA 6Gb/s connector(s)
1 x CPU Fan connector(s) (1 x 4 -pin)
1 x Chassis Fan connector(s) (1 x 4 -pin)
1 x 24-pin EATX Power connector(s)
1 x 4-pin ATX 12V Power connector(s)
1 x Front panel audio connector(s) (AAFP)
1 x Internal speaker connector(s)
1 x System panel(s)
1 x Chassis Intrusion connector(s)
1 x Clear CMOS jumper(s)
1 x 14-1 pin TPM connector
2.2.10 Expansion Capabilities
1 x PCI Express 3.0/2.0 x16
2.2.11 Rear I/O Ports
1 x PS/2 keyboard/mouse combo port(s)
1 x DVI-D
1 x D-Sub
1 x HDMI
1 x LAN (RJ45) port(s)
2 x USB 3.0 (blue)
4 x USB 2.0
3 x Audio jack(s)

11
V1.0 Vig760S Motherboard Manual
System Board Connectors
Figure 1: System Board Components
System Board Components Table
1
CPU and chassis fan connectors (4-pin
CPU_FAN, 4-pin CHA_FAN)
9
PCI Express 3.0/2.0 x16 slot
2
ATX power connectors (24-pin
EATXPWR, 4-pin ATX12V)
10
Chassis intrusion connector (4-1
pin CHASSIS)
3
Intel® LGA1151 CPU socket
11
Clear RTC RAM (2-pin CLRTC)
4
DDR4 DIMM slots
12
Front panel audio connector (10-
1 pin AAFP)
5
Speaker connector (4-pin SPEAKER)
13
Serial port connector (10-1 pin
COM1)
6
System panel connector (10-1 pin
PANEL)
14
TPM connector (14-1 pin TPM)
7
USB 3.0 connector (20-1 pin USB3_12)
15
USB 2.0 connector (10-1 pin
USB910)
8
Intel® H110 Serial ATA 6.0Gb/s
connectors (7-pin SATA6G_1~4)
Table 1: System Board Components

12
V1.0 Vig760S Motherboard Manual
2.3.1 (1)CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN).
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
NOTE: Do not forget to connect the fan cables to the fan connectors.
Insufficient air flow inside the system may damage the motherboard
components. These are not jumpers! Do not place jumper caps on the
fan connectors! The CPU_FAN connector supports a CPU fan of
maximum 1A (12 W) fan power.
2.3.2 (2) ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)
Correctly orient the ATX power supply plugs into these connectors and push down
firmly until the connectors completely fit.
NOTE: For a fully configured system, we recommend that you use a
power supply unit (PSU) that complies with ATX 12 V Specification
2.0 (or later version) and provides a minimum power of 350 W.
2.3.3 (3) Intel® LGA1151 CPU socket
Install Intel® LGA1151 CPU into this surface mount LGA1151 socket, which is
designed for 6th Generation Intel® Core™ i7 / i5 / i3, Pentium®, and Celeron®
processors.
2.3.4 (4) DDR4 DIMM slots
Install 2 GB, 4 GB, 8 GB, and 16 GB unbuffered non-ECC DDR4 DIMMs into these
DIMM sockets.
2.3.5 (5) Speaker connector (4-pin SPEAKER)
The 4-pin connector is for the chassis-mounted system warning speaker. The speaker
allows you to hear system beeps and warnings.
2.3.6 (6) System panel connector (10-1 pin PANEL)
This connector supports several chassis-mounted functions.

13
V1.0 Vig760S Motherboard Manual
2.3.7 (7) USB 3.0 connector (20-1 pin USB3_12)
This connector allows you to connect a USB 3.0 module for additional USB 3.0 front or
rear panel ports. With an installed USB 3.0 module, you can enjoy all the benefits of
USB 3.0 including faster data transfer speeds of up to 5 Gbps, faster charging time for
USB-chargeable devices, optimized power efficiency, and backward compatibility with
USB 2.0.
2.3.8 (8) Intel® H110 Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1~4)
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA
Gb/s signal cables
2.3.9 (9) PCI Express 3.0/2.0 x16 slot
This motherboard has one PCI Express 3.0/2.0 x16 slot that supports PCI Express
3.0/2.0 x16 graphic cards complying with the PCI Express specifications.
A
B
C
D
E
F
G
H
PCIEx16
shared
–
–
–
–
–
–
–
Realtek
8111H LAN
Controller
–
shared
–
–
–
–
–
–
USB 3.0
Controller
shared
–
–
–
–
–
–
–
SATA
Controller
shared
–
–
–
–
–
–
–
HD Audio
Controller
shared
–
–
–
–
–
–
–
HD Audio
Controller
shared
–
–
–
–
–
–
–
Table 2: Slots
NOTE: When using PCI cards on shared slots, ensure that the drivers
support “Share IRQ” or that the cards do not need IRQ assignments.
Otherwise, conflicts will arise between the two PCI groups, making the
system unstable and the card inoperable.
2.3.10 (10) Chassis intrusion connector (4-1 pin CHASSIS)
This connector is for a chassis-mounted intrusion detection sensor or switch. Connect
one end of the chassis intrusion sensor or switch cable to this connector. The chassis
intrusion sensor or switch sends a high-level signal to this connector when a chassis
component is removed or replaced. The signal is then generated as a chassis
intrusion event.
By default, the pins labelled “Intruder” are shorted with a jumper cap. Remove the
jumper caps only when you intend to use the chassis intrusion detection feature.

14
V1.0 Vig760S Motherboard Manual
2.3.11 (11) Clear RTC RAM (2-pin CLRTC)
This header allows you to clear the CMOS RTC RAM data of the system setup
information such as date, time, and system passwords
To erase the RTC RAM:
1 Turn OFF the computer and unplug the power cord.
2 Use a metal object such as a screwdriver to short the two
pins.
3 Plug the power cord and turn ON the computer.
4 Hold down the <Del> key during the boot process and enter
BIOS setup to re-enter data
2.3.12 (12) Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
NOTE: We recommend that you connect a high-definition front panel
audio module to this connector to avail of the motherboard’s high-
definition audio capability.
If you want to connect a high-definition front panel audio module to
this connector, set the Front Panel Type item in the BIOS setup to
[HD Audio]. If you want to connect an AC’97 front panel audio module
to this connector, set the item to [AC97]. By default, this connector is
set to [HD Audio
2.3.13 (13) Serial port connector (10-1 pin COM1)
Connect the serial port module cable to this connector, then install the module to a slot
opening at the back of the system chassis.
2.3.14 (14) PM connector (14-1 pin TPM)
Connect a Trusted Platform Module (TPM) system to this connector to enhance
network security, protect digital identities, and ensure platform integrity.

15
V1.0 Vig760S Motherboard Manual
2.3.15 (15) USB 2.0 connector (10-1 pin USB910)
This connector is for USB 2.0 ports. Connect the USB module cable to this connector,
then install the module to a slot opening at the back of the system chassis. This USB
connector complies with USB 2.0 specifications and supports up to 480Mbps
connection speed

16
V1.0 Vig760S Motherboard Manual
Rear panel connectors
Figure 2: Rear panel connectors
1
PS/2 mouse/keyboard port
(green/purple)
6
Microphone port (pink)
2
Video Graphics Adapter (VGA)
port
7
USB 2.0 ports
3
LAN (RJ-45) port
8v
USB 3.0 port
4
Line In port (light blue)
9
DVI-D port
5
Line Out port (lime)
10
HDMI port.
Table 3: Rear panel connectors
2.4.1 (1) PS/2 mouse/keyboard combo port.
This port connects to a PS/2 mouse or PS/2 keyboard.
2.4.2 (2) Video Graphics Adapter (VGA) port.
This 15-pin port is for a VGA monitor or other VGA-compatible devices.

17
V1.0 Vig760S Motherboard Manual
2.4.3 (3) LAN (RJ-45) port.
This port allows Gigabit connection to a Local Area Network (LAN) through a network
hub.
Activity/Link LED
Speed LED
Status
Description
Status
Description
Off
No link
OFF
10Mbps connection
Orange
Linked
ORANGE
100Mbps connection
Orange
(Blinking)
Data activity
GREEN
1Gbps connection
Orange (Blinking
then steady)
Ready to wake up
from S5 mode
_
_
Table 4: LAN (RJ-45) port
RJ-45 LAN Connector LEDs
The two LEDs are built into the RJ-45 LAN connector located on the back panel. These
LEDs indicate the status of the LAN as shown in Table 1.
Figure 3: RJ-45 LAN Connector
2.4.4 (4) Line In port (light blue)
This port connects to the tape, CD, DVD player, or other audio sources.
2.4.5 (5) Line Out port (lime)
This port connects to a headphone or a speaker. In the 4.1, 5.1 and 7.1-
channel configurations, the function of this port becomes Front Speaker
Out.
2.4.6 (6) Microphone port (pink)
This port connects to a microphone.
NOTE: Refer to the audio configuration table for the function of the
audio ports in 2.1, 4.1, 5.1, or 7.1-channel configuration.

18
V1.0 Vig760S Motherboard Manual
Audio 2.1, 4.1, 5.1, or 7.1-channel configuration
Audio 2.1, 4.1, 5.1, or 7.1-channel configuration
Port
Headset
2.1-
channel
4.1-channel
5.1-channel
7.1-channel
Light Blue (Rear panel)
Line In
Rear Speaker
Out
Rear Speaker
Out
Rear Speaker
Out
Lime (Rear panel)
Line Out
Front
Speaker Out
Front Speaker
Out
Front Speaker
Out
Pink (Rear panel)
Mic In
Mic In
Bass/Center
Bass/Center
Lime (Front panel)
-
-
-
Side Speaker
Out
Table 5: Audio 2.1, 4.1, 5.1, or 7.1-channel configuration
NOTE: To configure a 7.1-channel audio output, use a chassis with
HD audio module in the front panel to support a 7.1-channel audio
output.
2.4.7 (7) USB 2.0 ports.
These 4-pin Universal Serial Bus (USB) ports are for USB 2.0/1.1 devices.
2.4.8 (8) USB 3.0 ports.
These 9-pin Universal Serial Bus (USB) ports are for USB 3.0 devices.
NOTE: Due to the limitation of USB 3.0 controller, USB 3.0 devices
can only be used under Windows OS environment and after the USB
3.0 driver installation.
We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster
and better performance from your USB 3.0 devices.
2.4.9 (9) DVI-D port.
This port is for any DVI-D compatible device.
DVI-D cannot be converted to output from RGB Signal to CRT and is not compatible
with DVI-I.
2.4.10 (10) HDMI port.
This port is for a High-Definition Multimedia Interface (HDMI) connector, and is HDCP
compliant allowing playback of HD DVD, Blu-ray, and other protected content.

19
V1.0 Vig760S Motherboard Manual
Chapter 3 - System Board Options
Upgrades
The Vig760s motherboard is supports Intel® Core i3, i5, i7 and Pentium processors in
the LGA1151 socket. RAM can be upgraded to a maximum of 16GB using DDR4
2133MHz Non ECC Unbuffered DIMMs.
WARNING!
Unplug the system before carrying out the procedures described in this chapter.
Failure to disconnect power before you open the system can result in personal
injury or equipment damage. Hazardous voltage, current, and energy levels are
present in this product. Power switch terminals can have hazardous Voltages
present even when the power switch is off.
The procedures assume familiarity with the general terminology associated with
personal computers and with the safety practices and regulatory compliance
required for using and modifying electronic equipment.
Do not operate the system with the cover removed. Always replace the cover
before turning on the system.
As the colours of the wires in the mains lead of this computer may not correspond with the
coloured markings identifying the terminals in your plug precede as follows:
The wire which is coloured green-and-yellow must be connected to the terminal in the plug
which is marked by the letter Eor by the safety Earth symbol Qor coloured green or green-
and-yellow.
The wire which is coloured blue must be connected to the terminal which is marked with the
letter Nor coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with the
letter Lor coloured red.
CAUTION!
The Viglen Vig760S motherboard and
associated components are sensitive electronic
devices. A small static shock from your body can
cause expensive damage to your equipment.

20
V1.0 Vig760S Motherboard Manual
Upgrade Procedures
Make sure you are earthed and free of static charge before you open the computer
case. If you are unsure about upgrading your computer, return it to Viglen so a qualified
engineer can perform the upgrade.
Steps to take to prevent static discharge:
1. The best way to prevent static discharge is to buy an anti-static strap from your local
electrical shop. While you are wearing the strap and it is earthed, static charge will
be harmlessly bled to ground.
2. Do not remove the component from its anti-static protective packaging until you are
about to install it.
3. Hold boards by the edges - try not to touch components / interface strips etc.
NOTE: We recommend that you return your computer to the service
department for upgrading. Any work carried out is fully guaranteed.
Upgrades should only be carried out by persons who are familiar with
handling ic's, as incorrect installation will invalidate the guarantee.
3.2.1 Upgrading the CPU
CAUTION!
Before installing or removing a processor, make sure the AC power has been removed
by unplugging the power cord from the computer; the standby power LED should not be
lit. Failure to do so could damage the processor and the board.
To install a processor, follow these instructions:
1. Unlatch the processor socket lever by pushing it down and away from the socket.
Figure 4: Unlatch the socket lever