Vigor 530 User manual

1
Vigor 530 USB2.0 Adapter
Quick Start to Wireless Networking
1 Installation
1. Insert the installation CD. It automatically starts the setup program for
software installation.
2. Follow the installation wizard to complete the software installation process
(restart your computer if necessary).
3. Connect the Vigor 530 USB 2.0Adapter to your PC/notebook PC.
NOTE! Please use USB extension cable to connect the Vigor 530 USB 2.0
Adapter with your PC/Notebook during normal operation.
4. Operation System will detect new device and verify the driver automatically.

2
NOTE! During installation procedure, each operating system may prompt different
specific options:
Windows 98SE: The system will request the original Windows CD during the
installation process. When the installation is finished, you’ll have to restart your
computer.
Windows Me: Please restart your computer when the installation is finished.
Windows 2000/XP: Select “Install the software automatically” when the window
with this option appears, and then click “Next” to continue installation.
NOTE! In Windows XP, it is recommended that you use the Vigor 530 USB2.0
adapter Setting. Please check User’s Manual Chapter 3.1.2 to disable the
Zero-Configuration before opening the Setting window.

3
2. Connecting to an Existing Network
1. Double click on the shortcut icon or go to windows Start > Programs > Vigor
530 > Vigor 530 USB2.0 adapter Setting to open the Setting window. You can
also see a small link-status icon in Windows System Tray.
2. Key in “any” for Network Name and click “Apply”. The Vigor 530 USB2.0
adapter will search an available network automatically. Once connected, the
link-status icon will change to green .
3. If you would like to connect with certain Access Point, you may contact with
network administrator for Network Name.

4
4 Go to “Status” Tab to view network link status.
5 For details of each tab in Vigor 530 USB2.0 adapter Setting, please read User’s
Manual Chapter 4.