ViLO HOME SARASOTA VH992 User manual

C1
C2
C3
C4
C5
C7
C8
Open
Lock
Open Lock
Open
Lock
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may have come
loose inside the carton during shipment. Please read all instruction carefully before assembling. For your safety, assembly by two
people is recommended.
IMPORTANT SAFETY CONSTRUCION
PARTS INCLUDED: HARDWARE ENCLOSED:
·(C1) Top Panel x 1
·(C2) Front Frame & Side Panel x 1
·(C3) Left Partition Panel x 1
·(C4) Right Partition Panel x 1
·(C5) Bottom Panel x 3
·(C6) Shelf Panel x 3
·(C7) Support Leg x 2
·(C8) Back Frame Panel x 1
·A x 6 Knob
·B x 6 Bolt Ø4x30 (mm)
·C x 12 Shelf Pin
·D x 12 Wood Screw Ø3.5x15 (mm)
· x 1 Anti-Tip Kit
Page 1 of 6
15 min Two People Required
Open
Lock
Open
Lock
Open
Lock
C5
C5
C6
C6
C6
C7
Open
kLoc
Phillips Head
Not Provided
VH992 - VH993 - VH994
ASSEMBLY INSTRUCTION
SARASOTA 70" TV STAND

Page 2 of 6
ASSEMBLY INSTRUCTIONS
-Please lay all components on smooth flat surface to prevent scratches
-Use the EPE foam to protect the plastic hardware before assembly.
-Open Left and Right side panel. (See Detail A)
C2
Insert the Support Leg to the Left and Right Partition Panel (See Detail B)
Detail A
Detail B
Open
Lock
Open
Lock
Open
Lock
Open
Lock
Open
Lock
C4
C3
C7
Open
Lock
Open
Lock
EPE Foam
STEP 1:
STEP 2:

Page 3 of 6
STEP 3:
- Slightly insert the Back Panel (C8) to the Side Panel and Partition Panel (C3), (C4). (See Detail D)
- Please match the corresponding numbers up to lock into place
Open Lock
Open Lock
Detail C
1 2 3
1 2 3
Detail D
C4
C3
C2
Open
Lock
Open
Lock
Open
Lock
Open
Lock
Open
Lock
Open Lock
Open
Lock
C8
Open
Lock
Open
Lock
Open
Lock
Open
Lock
Open
Lock
- Make sure all latches are in the open position before installing
- Insert the Left (C3) and Right Partition Panel (C4) to the Front Frame (C2). (See Detail C)
STEP 4:

Page 4 of 6
STEP 5: Insert the Bottom Panel (C5). (See Detail E)
Assembly the Shelf Panel (C6) with Shelf Pin (C) and Wood Screw (D). (See Detail F)
Detail F
Detail E
Lock
C5
C5
C5
C6
C6
C6
Open
Lock
Open
Lock
Open
Lock
Open
Lock
Open
Lock
STEP 6:
D
C

Page 5 of 6
- Make sure all latches are in the open position before installing.
- Carrying the top panel and slightly insert into the front - back and side panel
-Check all latches are in the locked position after the top panel in place
Open Lock
Open Lock
Detail G
Open Lock
Open Lock
C1
Detail H
Open
Lock
Open
Lock
Open
Lock
Open
Lock
Open
Lock
STEP 7:

STEP 8:
Page 6 of 6
STEP 9: Install the An-ti tipping kit to the wall for safety purposes. (See Detail J)
Detail I
Adjustable Leveler Instructions
Detail J
5
A
B
Assembly the Knob (A) to the Door (C2) with Bolt (B). (See Detail I)