Vine Smart Control TJ-610E User manual

TJ-610E Wi-Fi Thermostat
User Guide
Vine Smart Control
R

01
Electronic manual and installation video
1. This user manual only includes installation and simple setup instructions. For the more detailed operating
instructions and user guide, scan the QR code.
2. Watch installation video by scanning the QR code.
Electronic manual Installation Video
WE ARE HERE TO HELP, 24/7 !
WEBSITE： www.vineconnected.com
EMAIL： [e-mail]
HOTLINE： [phone](09:00am~05:00pm MON~FRI PST)

02
Vine App Setup
1. To download the "Vine Smart Control" app, scan the QR code or search "Vine Smart Control" in the Apple App
Store or Google Play Store.
2. Open the "Vine Smart Control" app. If you already have an account, tap Sign In. To create a new account, tap
Sign Up.
Note: You must create your own Vine account to use third-party services and products. These will not work with a
guest account. With a Vine account, you can also allow your family and friends to control your smart thermostat.
3. Tap + and select your smart thermostat.
4. Follow the in-app instructions to set up your smart thermostat.
Note: You can change the name and icon at any time by going to the smart thermostat screen and tapping. You
can use the Vine app to connect your smart thermostat to Amazon Alexa or Google Assistant.
iOS/Android
App Download
Download on the
APP Store
GET IT ON
Google Play

03
Vine Wi-Fi Thermostat
Screw sets
Flathead screwdriver
Wire labels
Jumper wire
User Manual
1 piece
2 pairs
1 piece
1 piece
1 piece
1 piece
Vine Thermostat - A Smart Choice for Smart Life!
You may also need these tools:
Here's what you'll find in the box:
Phillips screwdriver Level Pencil Home Wi-Fi Password

Compatibility Section：
For conventional (gas/oil/propane/electric), Heat-pump, and Dual Fuel Systems.
> 2-Heat & 2-Cool > 1-Heat & 1-Cool > Heat Only > Cool Only
> Heat Pump with Auxiliary Heating and Emergency Heating
C-wire is required to power the thermostat
04
Incompatible wiring and voltage
Please check the wall plate of your old thermostat to see if there's any indication as follows:
• Does not work with electric baseboard heat(110VAC~240VAC)
• Does not work with millivolt systems
• Does not support S terminals for indoors and outdoors sensors.
NOTE : If you are unsure, please contact a professional for help or call 1-800-264-3457
110 VAC
or
120 VAC
or
240 VAC
L1 L2

Create an account
When the app is ready, we need to move to next step to create an account, which is
important for full functioning and remote access of the thermostat. Create the
account with a valid email address and remember well the password as the
thermostat will be linked to this email address once registered.
Installation
Switch off power
Step 1
TJ-610E is designed to work with most of the standard 24V AC low voltage heating and cooling systems, such as gas
and oil furnaces, heat pumps, and single or dual-stage systems.
IMPORTANT as this protects you from blowing a fuse in
your equipment. To make sure the power is off, change
the temperature with your current thermostat and wait
for at least 5 minutes to be sure that the system is OFF.
Breaker Box
Switch
or
OFF
ON
05

Check that your system is off
Step 2
Remove your old thermostat from the wall plate
Step 3
Confirm your system is off by turning on your heat ( during winter ) or your AC ( during summer ). Wait a few
minutes—you should not feel air coming from your vents.
NOTE : If you have a digital thermostat
that has a blank display, skip this step.
Most thermostats allow you to remove the main unit and provide access to
a wall plate which holds the wiring terminals, you can take off the
thermostat by grasping and gently pulling. Some thermostats may have
screws, buttons, or clasps.
NOTE : DO NOT remove any wires from your old thermostat in this
step.
06

Take a picture of the wiring
Step 4
Take a clear picture of the wiring of your existing wall plate,
make sure the wire terminal labels are clear enough to be
read. This will be important reference for next step.
G
C
Y
R
Label the wires
Step 5
Label the old wall plate wires with labels from our new
thermostat box.
NOTE : If there's an Rc or Rh wire, attach the R lable to it.
G
C
Y
R
07

Use the screw set (screw & anchor) to mount the new
wall plate. In most cases, the old mounting position can
be used; if not, apply the new set. Be sure to check the
alignment of the new wall plate before and after the wall
plate installation.
Disconnect the wires from the old thermostat one by
one, you may need a screwdriver to release wires from
terminals.
NOTE : Wrap the wires around a pen or pencil so they
don’t fall back into the hole in the wall.
Step 6 Disconnect the wires and remove the old wall plate
Mount the New Wall Plate
Step 7
Compatibility
Checker
08

Use the picture you took before as reference to wire, the following chart is a wiring diagram for common systems,
please make sure that a C-wire exists in your old thermostat system.
Terminal
RC
RH
C
G
Y
Y2
W/E
O/B/W2
Conventional System
Power for cooling, 24V
Power for heating, 24V
Common wire, 24V
Fan
Power for cooling, 24V
Power for heating, 24V
Common wire, 24V
Fan
1st Stage Cool
2nd Stage Cool
1st Stage Heat
2nd Stage Heat
1st outdoor Stage Heat
2nd outdoor Stage Heat
1st Stage Auxiliary/Emergency Heat
Changeover (reversing valve)
connection for heat pump
Heat Pump System
09

Thermostat
1st Stage Heat 2nd Stage Heat
RC RH GW/E Y C Y2 O/B/W2
Single Stage Heat / Two Stage Heat- Furnace / Boiler with C-wire
Thermostat
RC RH GW/E Y C Y2 O/B/W2
Combined Single Stage Heat and Single Cool Stage with C-wire （ Remove Pre-installed
Jumper ）Cool Furnace and Air Conditioner
Thermostat
1st Stage
Heat
Emerg./AUX
Heating 2nd Stage Heat
RC RH GW/E Y C Y2 O/B/W2
Single Stage / Two Stage Heat Pump with Emergency Heat and Auxiliary Heat with
C-wire
10

1st Stage Cool 2nd Stage Cool
Thermostat
Single Stage Cool / Two Stage Cool‒Air conditioner
GW/E Y C Y2 O/B/W2
RC RH
Dual Fuel System-Combined Single Stage Heat Pump and Single Stage Furnace
with C-wire
Thermostat
RC RH GW/E Y C Y2 O/B/W2
11

If C-wire does not exist in your system, check the instruction below:
Check for the spare wire behind your wall plate or old thermostat, if there's one, connect it to the C-terminal of
the new wall plate.
Remove the cover of the furnace or heating system, open the cover of the heating/cooling system to find the
control board where you should find the same terminal labels as of the thermostat.
Find the other end of the spare wire, locate the bundle of wire with the same labels as that of your thermostat
end.
Connect the spare wire to the C-terminal.
Close the cover of the furnace or heating system.
Do you have a spare wire? Yes.
1 .
2 .
3 .
4 .
5 .
G
C
R
W/E
Y
G
C
R
W/E
Y
c
12

Conventional system without C wire ( also known as 4-wire system )
1. Remove the cover of the furnace or heating system, open the cover of the heating/cooling system to find the
control board where you should find the same terminal labels as of the thermostat, move the G-wire to the
C-wire, then connect G and Y terminals with the jumper wire (included in packing box).
At the same thermostat, connect C-wire and G-wire.
By this configuration, the thermostat will have NO fan control function.
NOTE : You may need to unscrew the cover, the control board may be either at the top or bottom.
1 .
2 .
3 .
Furnace
Thermostat
RC RH GW/E Y C O/B
Furnace wiring
terminal
Move G wire to C terminal
Move G wire to C terminal
R
G
W/E
Y
CO/B
jumper
G
C
R
W/E
Y
13

Refer to the above wiring diagram, insert all wires vertically from
the open socket into the proper terminal. Ensure each wire is
inserted into the matching terminal (refer to the photo taken
previously if needed). Pull wires gently to ensure wires are
securely fastened.
When all wires are connected well, place excess part of the wires
back to the wall.
First aim the two clips in upper part of the thermostat to the top
of the wall plate, then gently push and fit the wiring pole to the
terminals on the wall plate.
Connect the wires to the new wall plate
Step 8
Install the thermostat to the wall plate
Step 9
RC RH G W/E Y C Y2 O/B
/W2
push
1
2
clips
push
Firmly press
forward to secure it
into position.
14

Turn on the switch that controls your heating and cooling system, the thermostat will be powered on
and prompt you to start the setup. If you have any trouble installing the device or app, check the below
information for help, or simply visit our websites for installation videos.
WE ARE HERE TO HELP, 24/7 !
WEBSITE : www.vineconnected.com
EMAIL : [email protected]om
HOTLINE: [phone](09:00am~05:00pm
MON~FRI PST)
Breaker box
Switch
Power on and Enjoy
Step 10
ON
ON
OFF
15

Current Humidity
Current Date & Time
Current Temperature
Next Schedule Period
Decrease Temperature
Dial Control
Increase Temperature
Cooling Setpoint
Current Mode
Heating Setpoint
Current Fan Mode
Wi-Fi
Night-light Control
Menu
Night-light
Main Screen
16

For a quick and easy way to start using your new smart thermostat, the device will automatically direct
you to the Initialization Setup process once it’s turned on for the first time.
Gas/oil/Furnace, Electric, Heat Pump, Dual Fuel or
no Heating. Select according to your heating
system.
Equipment Type
Select your home's heating equipment type
from the options available:
Device Initial Setup
1
17

1. Select Gas/Oil/Furnace and tap "Setup".
2. Then select Appliance or Thermostat depending
on your personal preferences for fan control.
3. Tap "Next" at the bottom of the screen to continue.
1. Select Heat Pump and tap the "Setup button".
2. Then follow the on-screen instructions.
3. Tap "Next" at the bottom of the screen to continue.
Below is a list of possible examples which may help you to select correctly:
NOTE : If you are unsure of which option to select, contact 1-800-264-3457
If you have a furnace or boiler：
If you have a heat pump：
18

1. Select Dual Fuel and tap "Setup".
2. Then follow the on-screen instructions to configure the fossil fuel heating appliance settings
3. Tap "Next" at the bottom of the screen to continue.
4. Then follow the on-screen instructions to configure the heat pump heating appliance setting.
If you have a Dual fuel system：
19