Viper 9752VL User manual

Contents
Getting Started.................................................................................................... 3
Charging the Remote Control ................................................................ 3
Responder LC3 2-Way......................................................................................... 4
Advanced Remote Control Commands ................................................... 5
Fault Condition Alerts........................................................................... 5
Status Screen Icons.............................................................................................. 6
Basic Commands................................................................................................. 8
Remote Start........................................................................................ 8
Lock ................................................................................................... 8
Unlock................................................................................................ 9
AUX/Trunk.......................................................................................... 9
Advanced Commands ....................................................................................... 10
Runtime Reset .................................................................................... 10
Responder LC3 Configuration............................................................................. 11
Navigating Menus and Options .......................................................... 11
Access Menu Items ............................................................................ 11
Remote Pairing .................................................................................. 12
Remote Features (Main Menu) ............................................................. 12
Setup Remote menu............................................................................ 13
Pair Remote....................................................................................... 15
Demo Mode...................................................................................... 16
Power Off......................................................................................... 16
Exit .................................................................................................. 17
Remote Start Features ........................................................................................ 18
Disabling Remote Start ....................................................................... 18
Remote and System Operations.......................................................................... 19
Out of Range .................................................................................... 19
No Remote Output............................................................................. 19
1-Way Companion Remote Control .................................................................... 20
Using the 1-Way Companion Remote................................................... 21
Accessing Commands ........................................................................ 21
Button Auto Lock................................................................................ 21
Programming .................................................................................... 21
Battery Information (1-Way) ................................................................ 23
Battery Information (Responder LC3)................................................................... 24
Low Battery....................................................................................... 24
Low Battery Alerts.............................................................................. 25
Battery Life........................................................................................ 25
Battery Disposal ................................................................................ 26
Government Regulations .................................................................................... 27
Warning! Safety First......................................................................................... 29
Limited Lifetime Consumer Warranty................................................................... 30
9752VL 2012-07-11

3
© 2012 Directed. All rights reserved.
Getting Started
Your Responder LC3 remote is powered by an internal rechargeable
battery that can only be serviced by an authorized Directed dealer.
Due to transit and storage time prior to your purchase, the battery
charge may have depleted. To ensure proper operation, check the
battery level and connect the battery charger if not fully charged. See
Battery Information and Status Screen Icons sections for more informa-
tion about the battery.
Charging the Remote Control
1. Plug the AC adapter into a 110V AC outlet. Insert the mini-USB
connector into the mini-USB port located on the side of the
remote control (see diagram under Responder LC3 2-way). The
text field will display charge to indicate the remote control is
charging (The remote remains operational while charging and
can command the system).
2. Once fully charged the text field will display full .
3. The remote control is then ready for use. Disconnect the mini-
USB end from the remote control first and then the AC adapter
from the AC outlet.
Note If the battery is excessively depleted when the charger is
connected, functionality may be delayed while it charges to
the minimum voltage required to operate the display, after
which normal charging resumes.

4© 2012 Directed. All rights reserved.
Responder LC3 2-Way
1-800-274-0200
RPN 7752V
IC: 1513A-7752
FCC ID:EZSDEI7752
1-800-274-0200
RPN 7752X
IC: 1513A-7752
FCC ID:EZSDEI7752
1-800-274-0200
RPN 7752P
IC: 1513A-7752
FCC ID:EZSDEI7752
Display
Mini-USB Port
Display
Mini-USB Port
Display
Mini-USB Port
Internal
Antenna
Internal
Antenna
Internal
Antenna
3
4
5
3
4
5
12
3
4
5
12
1 2
Feature Description
Internal Antenna Used for transmitting and receiving information
Display Status screen - the upper portion of the display contains status
icons for the System, Remote Start and Remote Control.
Text field - the lower portion of display - shows the Clock,
or Runtime, as well as Command confirmations, Page mes-
sages and programming menus
1
AUX
Press for one second to lock.
2
AUX
Press for one second to unlock.
3AUX Press and hold for 5 seconds to activate optional trunk
release or other optional accessory.
4
AUX
Press for one second to activate remote start.
5
AUX
Allows access to programming and modifies operation of
the other buttons.
Mini-USB Port The battery charger plugs into this port.

5
© 2012 Directed. All rights reserved.
Advanced Remote Control Commands
Refer to the Quick Reference Guide for more information
on advanced remote start commands that are specific to
each vehicle.
Fault Condition Alerts
If, when performing a command, a condition exists that does not
allow activation of a Remote Start feature*, the not available or
remote start error text and a fault tone will play.
* Remote Start feature not available when the Remote Start status
is incorrect upon receiving the command. Refer to the notes in-
cluded in the command descriptions that address these faults or
go to Remote Start Error under the Remote Start Features section
for more details.

6© 2012 Directed. All rights reserved.
Status Screen Icons
1
ALL
Text Field
Status Screen
Icons
The table below describes all the status screen icons.
Icon Description
System Status

ALL
Locked: The system is Locked.

ALL
Unlocked: The system is Unlocked.
Remote Start

ALL
Remote start is active, the engine is running.

ALL
On during Aux/Trunk channel activation.

ALL
On during Fault Report to indicate the Hood is open.

7
© 2012 Directed. All rights reserved.
Icon Description
Remote Control Status

ALL
Bars indicate battery level is Full, ¾,½,¼ or Empty.

ALL
On while the remote control is transmitting a command.

ALL
On while the remote control is receiving a message.

ALL
On with Out of Range fault tone to indicate the remote failed to
receive a command confirmation.

ALL
Pager on: The remote will wake up to listen for messages.

ALL
Pager off: The remote will not wake up to listen for messages.

ALL
The remote will Vibrate when messages are received.

ALL
The remote will emit Beeps and Tones when messages are
received.
Text field Displays the Clock, Runtime, message text and feature menus.

8© 2012 Directed. All rights reserved.
Basic Commands
Remote Start
Press and release
AUX
AUX
Activates (or if On, deactivates) the remote starter.
The engine and parking lights turn On and the
remote start on text and tones play, or the engine
and parking lights turn Off and the remote start off text and tones
play to confirm, the Remote Start status icons update. The
AUX
AUX
icon
will display in the status screen and the text field will display the
Runtime or Clock as programmed. If Remote Start fails to activate,
remote start error text and a fault tone play.
The runtime on the remote starter is predetermined based on vehicle
application. The remote starter will shut down when the preset runtime
times out or when any shutdown zone becomes active.
Note Refer to the Quick Reference Guide for more information.
Lock
Press and release
AUX
AUX
The doors lock and parking lights flash once. The armed text and
beeps play to confirm and the System Status Icons update.
Note If the remote is set to Remote Keyless Entry (RKE), it will dis-
play LOCK/UNLOCK; otherwise, it will display ARMED/
DISARMED.
level 1 level 2 level 3 level 4
1
ALL
level 4
6:30
6:30

9
© 2012 Directed. All rights reserved.
Unlock
Press and release
AUX
AUX
The doors unlock and parking lights flash twice. The disarm text and
beeps play to confirm and the system status icons update.
Note If the remote is set to Remote Keyless Entry (RKE), it will dis-
play LOCK/UNLOCK; otherwise, it will display ARMED/
DISARMED.
AUX/Trunk
Press and hold AUX
AUX
The Trunk opens (if connected) when this button is pressed for 5 sec-
onds. The trunk text and tones play to confirm.

10 © 2012 Directed. All rights reserved.
Advanced Commands
Refer to the Quick Reference Guide for more information
on advanced commands that are specific to each vehicle.
Runtime Reset
Press the
AUX
button 1 time and then
AUX
AUX
.
Re-starts the remote start runtime counter if remote start is active.

11
© 2012 Directed. All rights reserved.
Responder LC3 Configuration
Operations of the Responder LC3 and how it communicates messages
are set in the configuration Main Menu. The following instructions will
direct you through the available programming options.
Navigating Menus and Options
Navigating menus and features, changing options, and exiting are
performed using the remote control buttons. The following instructions
discuss how to access and configure the settings.
Access Menu Items
1. Press and hold the
AUX
button for 8 seconds, the remote will beep
once, main menu is displayed.
2. Release the
AUX
button to display the Main Menu item list,
setup remote is displayed.
3. The Main Menu has been accessed and configuring can begin.
Use the following process to view the Main Menu features, op-
tions and settings in the text field. The following actions are com-
monly used throughout the configuration operation.
• Press the AUX
AUX
or
AUX
AUX
buttons to change the feature or option
that is displayed in the text field.
• Press the
AUX
button to choose the feature in the text field and
view its options. Press it when the desired feature or option
is in the text field to set it as the new setting.
4. To exit configuration: use the
AUX
AUX
or
AUX
AUX
buttons.

12 © 2012 Directed. All rights reserved.
Remote Pairing
The following instruction will step you through the remote pairing op-
eration.
1. Perform the steps under Access menu items section to access the
Pair Remote mode.
2. When the remote beeps 3 times and pair is displayed the
remote is ready to pair.
3. Within 5 seconds press and release 1 time the Integrated Pro-
gramming Button (IPB) on the XL202.
4. Within 5 seconds, press and hold IPB on the XL202. The status
LED will flash one time to confirm the system is ready for remote
pairing.
5. Press and hold the
AUX
AUX
button the remote will emit several tones
to confirm successful pairing. success is displayed and the
remote returns to the main menu.
6. Release the IPB on the XL202.
Note failed will be displayed and the remote will stay in the
pair mode in case of an unsuccessful pairing. Check the
system status and try again.
Note Consult the installation center for the location of the XL202
or refer to dealer for programming.
Remote Features (Main Menu)
The following Main Menu list of features is available for configuration
of the remote control.

13
© 2012 Directed. All rights reserved.
Setup Remote menu
Keypad Lock
Options: off ,auto
When off , the buttons do not lock and always perform a com-
mand when pressed. When set to auto , the remote buttons
lock after a 20 second lapse between buttons presses to prevent
unintentional operations. If a button is pressed when locked a
fault tone plays as an alert followed by unlock instructions in the
text field. To unlock the buttons, press the
AUX
button followed by
the
AUX
AUX
button. The unlock tones play and ready is displayed
in the text field, a command can now be performed.
Page Mode
Options: power save ,off ,on
Paging is how the Responder LC3 remote monitors your system’s
messages. power save extends battery life by turning Paging
Off after 72 hours if the remote control is not used during this
period. Just press any button to resume system monitoring. When
set to on it wakes up every few seconds to listen for pages
from the system. When set to off it does not wake up to receive
remote start or alarm trigger pages.
Page Alert
Options: tone vibe ,tone ,vibe ,screen only
There are several ways for the Responder LC3 to alert you when
it has received a message from the system.
tone vibe will alert by both emitting tones and vibrating the re-
mote. Select tone to be alerted by tones that are unique for

14 © 2012 Directed. All rights reserved.
each message. Select vibe and the Responder LC3 will silently
alert you with a gentle vibration, or select screen only when you
don’t want to be interrupted.
Remote Start Info
Options: runtime ,temp ,clock
The text field can be set to display the information you prefer
during remote start. runtime : Remote Start Runtime, temp (not
available on this system), or the clock will be displayed in the
text field while Remote Start is on.
Runtime Alert (Not available on this system)
Options: on ,off
Car 2
Options: off ,on ,home
Turns off or on , 2 car operation from the remote. The option
for home is not available.
Screen Color
Options: off ,white ,lt grn ,violet ,aqua ,red ,green ,blue
The status screen backlighting can be off , or will illuminate
with a selected color during output when set to one of the option
colors.
Temp Unit (Not available on this system)
Options: f,c

15
© 2012 Directed. All rights reserved.
Button Beep
Options: on ,off
When set to on , the remote will emit a beep as confirmation
of a button press. When set to off , beeps are not emitted for
button presses.
System Type
Options: sec ,rke
Note If the remote is set to Remote Keyless Entry (RKE), it will
display LOCK/UNLOCK; otherwise, it will display
ARMED/DISARMED.
Clock Set
Options: hour ,min
Review
Displays firmware version
Exit
Exits and returns to the main menu
Pair Remote
See Remote Pairing section on page 12.

16 © 2012 Directed. All rights reserved.
Demo Mode
Demo Mode plays a pre-selected group of animations as a demon-
stration tool to show friends or family. Running Demo mode shortens
the battery life over time if used excessively
• single silent : The remote will display a selection of icons on
the status screen without beeps and tones then stop.
• single sound : The remote will display a selection of icons on
the status screen with beeps and tones then stop.
• loop silent : The remote will display a selection of icons on
the status screen without beeps and tones in an endless loop until
the battery charger is disconnected.
• loop sound : The remote will display a selection of icons on
the status screen with beeps and tones in an endless loop until the
battery charger is disconnected.
Note Loop Silent and Loop Sound are not available and will not
appear in the Demo Mode menu unless the battery charger
is connected.
Power Off
When an extended period of non-operation is anticipated, turning the
power off will preserve the battery charge. Press the
AUX
button while
power off is displayed. The status screen icons clear as the power
off tones play, the remote is turned off.
To turn the remote on, Press and hold the
AUX
button for 3 seconds,
the status screen icons refresh as the power on tones play. The remote
also turns itself on and begins charging when the battery charger is
connected.

17
© 2012 Directed. All rights reserved.
Exit
To return to normal operation, press the
AUX
button while EXIT is dis-
played.

18 © 2012 Directed. All rights reserved.
Remote Start Features
Refer to the Quick Reference Guide for more information on
remote start features that are specific to each vehicle.
Disabling Remote Start
Remote start can be disabled by moving the Toggle Switch to the Off
position. If remote start is attempted while Off, the engine will not start.
Move the switch back to the On position to resume normal operation.
Note Consult the installation center for the location of Toggle
switch.

19
© 2012 Directed. All rights reserved.
Remote and System Operations
Out of Range
Each time a command is performed the remote will expect a com-
mand confirmation from the system. If a command confirmation is not
received the out-of-range icon (

ALL
)and a fault tone will play as an
alert.
No Remote Output
Occasionally when a command is performed the remote may not
generate a command confirmation output or Out of Range output.
This indicates that the system received the command but it was an
incomplete command (e.g. Aux button pressed too short to activate
the trunk release) or it was an illegal message (e.g. the command
was corrupted due to local RF interference). These are temporary nor-
mal functions of the system and remote, perform the command again
within 10 seconds to return to normal operation.

20 © 2012 Directed. All rights reserved.
1-Way Companion Remote Control
1-800-274-0200
RPN 7152P
IC: 1513A-7152
FCC ID:EZSDEI7152
BATTERY: CR2032
1-800-274-0200
RPN 7152X
IC: 1513A-7152
FCC ID:EZSDEI7152
BATTERY: CR2032
8
9
Transmit
LED
Internal
Antenna
AUX
1
2
3
4
5
Transmit
LED
Internal
Antenna
1
2
3
4
5
1
2
3
4
5
Transmit
LED
Internal
Antenna
Feature Description
Internal Antenna Used for transmitting information
Transmit LED Transmit LED flashes when transmitting information.
1
AUX
Press for one second to lock.
2
AUX
Press for one second to unlock.
3
AUX
Press for one second to activate remote start.
4AUX Press and hold for 5 seconds to activate optional trunk
release or other optional accessory.
5
AUX
Allows access to programming and modifies operation of
the other buttons.