VIPowER VPA-5010KP2F User manual

As soon as you purchase VP-9101 and VP-9512,
Your SATA Mobile RACK will become External
Enclosure. .
3.5" HDD
not included
For External
AD/DC input
VP-9512
External
AD / DC
Adapter
VP-9101
External
SATA
Cable
Optional Accessory
Connect to PC
Step.5
Secure the drive and inner tray
with four retaining screws.
Step.6
Replace the inner tray top cover.
VP-9101P
External
SATA
Cable
Optional Accessory
Unlike all the other MobileRACK in the market,
ViPowER VPA-5010 series is the only SATA
MobileRACK with worldwide patented Direct
Link technology. Allowing direct HDD connection
without any intermediate cable and/or connector.
Patented
Direct Link
As soon as you purchase VP-9101P, Your SATA
Mobile RACK will become ExternalEnclosure.
For Internal
For External
AD/DC input
Connect to PC
3.5" HDD
not included
ViPowER SATA Direct-Link
MobileRACK Installation Guide
Step.1
Pull in the SATAMobileRACK.
Step.2
Secure the SATA MobileRACK
with four retaining screws.
Step.3
Remove the inner tray.
Step.4
Slide the top cover off.
Step.7
Insert the inner tray.
Step.8
Slide the Latch-Switch Left
to Lock.
RIGHT
Unlock / OFF
Position
LEFT
Lock / ON
Position
The Key-Lock and latch-switch support hot-
swapping. Use the Key-Lock or latch-switch to
MobileRACK ON after inserting the inner tray,
and OFF before removing it.
Mode No.:
VPA-5010LS2F
VPA-5010KP2F
VPM-5010LS2F
VPM-5010KP2F
VPP-2010LS2F
VPP-2010KP2F
Key-Lock
Lock / ON
Position
Key-Lock
Unlock / OFF
Position
Key-Lock type Latch-Switch type