VIRDI PLANTER MODULA User manual
PLANTER MODULA
Thank You for purchasing a modular pot. Read all assembly instructions before
beginning.
We recommend to use a Phillips screwdriver or a cordless screwdriver to assemble the pot.
While using the cordless screwdriver, set up the torque on 50%.
STEP 1
Connect all side walls, walls connectors and reinforcements together as illustrated.
STEP 2
Insert the screws into the wider part of hole (fi 5 mm)
VIRIDI POLSKA Z O.O. / UL. ZBOŻOWA 42B / 40-657 KATOWICE
WWW.VIRIDIPOLSKA.PL / [email protected] / TEL. +48 792 699 699
1
STEP 3
Tighten all screws.
STEP 4
After assembling the pot, measure its width at the place where the walls are connected.
In order to obtain the target dimension, use a tensioning set (2 hooks + rope).
STEP 5
Attach the hooks to the holes in the side wall as illustrated.
VIRIDI POLSKA Z O.O. / UL. ZBOŻOWA 42B / 40-657 KATOWICE
WWW.VIRIDIPOLSKA.PL / [email protected] / TEL. +48 792 699 699
2
STEP 6
Then pull the ropde through the holes in the hooks and make sure the cord is tense.
Now you can fill the pot with soil, plant your favorite plants and enjoy the view.
VIRIDI POLSKA Z O.O. / UL. ZBOŻOWA 42B / 40-657 KATOWICE
WWW.VIRIDIPOLSKA.PL / [email protected] / TEL. +48 792 699 699
3
Table of contents
