Vision Engineering Elite-Cam User manual

User Guide
Elite-Cam
Connection & Setup

INTRODUCTIONElite-Cam Integrated USB Digital Camera
The Elite-Cam is a permanently-engaged USB digital camera solution for integration with Vision
Engineering products.
Health & Safety
Vision Engineering and its products conform to the requirements of the EC Directives on Waste
Electrical and Electronic Equipment (WEEE) and Restriction of Hazardous Substances (RoHS).
www.visioneng.com/support Elite-Cam Connection & Setup
INTRODUCTION
i
i

CONTENTS
Pack contents
Elite-Cam viewing head
Software CD
Interconnect cable.
Elite-Cam AMCap user guide (not shown)
Mantis Elite user guide (not shown)
Mantis Elite-Cam user guide (not shown)
www.visioneng.com/support Elite-Cam Connection & Setup
CONTENTS
1
1
1
2
3
4
5
6
INTRODUCTION
Elite-Cam Integrated USB Digital Camera i
Health & Safety i
CONTENTS
Pack contents 1
Assembly 2
Operation 2
General care and maintenance 2
WARRANTY

Assembly
uFollow the Mantis Elite user guide to mount the viewing head to the stand.
uInstall software contained on the software CD , as per Elite-Cam AMCap software user
guide.
uConnect cable to the viewing head and then the chosen computer as per
Elite-Cam AMCap software user guide.
Operation
uRefer to Mantis Elite user guide provided for general operation.
uRefer to Elite-Cam AMCap user guide to take an image or video capture of the subject.
General care and maintenance
uFor all care and maintenance guidelines see the Mantis Elite user guide.
Elite-Cam Connection & Setup www.visioneng.com/support
CONTENTS
2
2
1
2
3
1

WARRANTY
WARRANTY
This product is warranted to be free from defects in material and workmanship for a period of one
year from the date of invoice to the original purchaser.
If during the warranty period the product is found to be defective, it will be repaired or replaced at
facilities of Vision Engineering or elsewhere, all at the option of Vision Engineering. However, Vision
Engineering reserves the right to refund the purchase price if it is unable to provide replacement,
and repair is not commercially practicable or cannot be timely made. Parts not of Vision Engineering
manufacture carry only the warranty of their manufacturer. Expendable components such as fuses
carry no warranty.
This warranty does not cover damage in transit, damage caused by misuse, neglect, or carelessness,
or damage resulting from either improper servicing or modification by other than Vision
Engineering approved service personnel. Further, this warranty does not cover any routine
maintenance work on the product described in the user guide or any minor maintenance work
which is reasonably expected to be performed by the purchaser.
No responsibility is assumed for unsatisfactory operating performance due to environmental
conditions such as humidity, dust, corrosive chemicals, deposition of oil or other foreign matter,
spillage, or other conditions beyond the control of Vision Engineering.
Except as stated herein, Vision Engineering makes no other warranties, express or implied by law,
whether for resale, fitness for a particular purpose or otherwise. Further, Vision Engineering shall
not under any circumstances be liable for incidental, consequential or other damages.

Distributor
Visit our multi-lingual website:
LIT4400 R1.0/06/09
www.visioneng.com
For more information...
Vision Engineering has a network of offices and technical distributors around the world. For more information,
please contact your Vision Engineering branch, local authorised distributor, or visit our website.
Vision Engineering Ltd.
(Manufacturing)
Send Road, Send, Woking,
Surrey, GU23 7ER, England
Tel: [phone]
Fax: [phone]
Email: [email protected]
Vision Engineering Ltd.
(Commercial)
Monument House, Monument Way West,
Woking, Surrey, GU21 5EN, England
Tel: [phone]
Fax: [phone]
Email: [email protected]
Vision Engineering Inc.
(Manufacturing & Commercial)
570 Danbury Road, New Milford,
CT 06776 USA
Tel: [phone]
Fax: [phone]
Email: [email protected]
Vision Engineering Inc.
(Commercial West Coast USA)
745 West Taft Avenue, Orange,
CA 92865 USA
Tel: [phone]
Fax: [phone]
Email: [email protected]
Vision Engineering Ltd.
(Central Europe)
Anton-Pendele-Str. 3,
82275 Emmering, Germany
Tel: [phone]
Fax: [phone]
Email: [email protected]
Nippon Vision Engineering
(Japan)
272-2 Saedo-cho, Tsuduki-ku,
Yokohama-shi, 224-0054, Japan
Tel: [phone]
Fax: [phone]
Email: [email protected]
Vision Engineering Ltd.
(France)
1 Rue de Terre Neuve, ZA Courtaboeuf,
91967 Les Ulis Cedex, France
Tel: [phone]
Fax: [phone]
Email: [email protected]
Vision Engineering Ltd Italia
(Italy)
20092 Cinisello Balsamo MI, Italy
Tel: [phone]
Fax: [phone]
Email: [email protected]
Via Cesare Cantù, 9
Vision Engineering Ltd
(China)
11J, International Ocean Building,
720 Pudong Avenue, Shanghai,
200120, P.R. China
Tel: [phone]
Fax: [phone]
Email: [email protected]
Vision Engineering
(SE Asia)
Email: [email protected]