Vitek Transcendent VT-TPTZ-B10X5N User manual

VITEK
VITEK
VT-TPTZ-B10X5N
5.0 MegaPixel H.265 10x Network IP PTZ
Bullet Camera with IR LEDs for up to 325’
IR Range
• 1/3” 5.0 MegaPixel CMOS Sensor
• Up to 2592x1944 @ 15fps / 2592x1520 @ 22fps
• H.264 / H.265 / MJPEG Triple Streaming
• True Day/Night by IR Cut Filter
• 4 Integrated High Power + 2 Laser Covert IR
LEDs with up to 325’ IR Range
• Rotation Range: Pan: 0~200° / Tilt: 45°/40° (Up/Down)
• Rotation Speed: Pan: 0~30°/second / Tilt: 0~25°/second
• 2D-DNR Noise Reduction
• 220 Presets programmed with view direction, zoom, BLC, etc
• 16:9 Video format
• Double layer metal body construction with IP66 Weather Resistance
• ONVIF Compliant
• 12VDC Operation
• 3 Year Warranty
FEATURES
OPTIONAL ACCESSORIES:
VT-TKB D 1
Transcendent 3D Network IP Keyboard Controller
with Integrated 5” HD LED Real-Time Display
QUICK START GUIDE
PLEASE NOTE:
Complete User Guide, Software, Tools, and
Updates are available online. Scan the QR Code
or visit: http://www.vitekcctv.com/Downloads

2 3
Package Contents
Installation
NOTE: The installation point must be able to support at least 4 times
the weight of the fully assembled camera.
1. IP IR PTZ Bullet Camera
2. Wall mount bracket
3. Power supply
4. Screws kits
5. User manual
As shown below, using a pencil, draw the position on
the wall where the unit will be mounted according to
the hole configuration on the mount.
See following page for screw insertion / wall installation
completion step.

3
NOTE: If the camera is being used in outdoor / damp
conditions, it is strongly recommended to seal the
mount with silicone gel.

4 5
Setup & Configuration
1. With a computer running Windows 7 or above install IP Wizard
2. With computer connected to the same network that the IP PTZ is
connected too, run IP wizard.
3. After IP Wizard is opened click on Search
4. IP Wizard will find all Transcendent IP PTZ cameras on the network

5
Setup & Configuration
5. Once camera(‘s) are found highlight the camera that needs to be
changed

6 7
9. After logging into camera click on “Browse” for live view or “Settings”
for detailed programming
Setup & Configuration
6. Once camera is highlighted you can change the IP address or ports
by making changes and then clicking on “Modify”
7. Once changes are completed double click on the IP camera you want
to connect too. IE will open and direct you to the login screen of the
camera.
8. Default User name and Password are admin/admin
Setup & Configuration

7
9. After logging into camera click on “Browse” for live view or “Settings”
for detailed programming
Setup & Configuration

8
Setup & Configuration
LIMITED PRODUCT WARRANTY
VITEK products carry a three (3) year limited warranty. VITEK warrants
to the purchaser that products manufactured by VITEK are free of any
rightful claim of infringement or the like, and when used in the manner
intended, will be free of defects in materials and workmanship for a
period of three (3) years, or as otherwise stated above, from the date of
purchase by the end user. This warranty is nontransferable and extends
only to the original buyer or end user customer of a VITEK Authorized
Reseller.
The product must have been used only for its intended purpose, and
not been subjected to damage by misuse, willful or accidental damage,
caused by excessive voltage or lightning.
The product must not have been tampered with in any way or the
guarantee will be considered null and void.
This guarantee does not affect your statutory rights.
Contact your local VITEK Reseller should servicing become necessary.
VITEK makes no warranty or guarantee whatsoever with respect to
products sold or purchased through unauthorized sales channels.
Warranty support is available only if product is purchased through a
VITEK Authorized Reseller. Version 2.0 09/2019