Vitek VTC-IRLED24A User manual

black
VITEK
•1/3” Color CCD image sensor
•Minimun Illumination of 0.4 Lux (0 Lux / F2.0 with IR LEDs
On)
•24 IR LEDs with 50’ Range
•3.6mm / f2.0 Standard Lens
•Automatic IR triggers On under low illumination / Off under
Normal Illumination
•Sun Shroud to reduce glare and dissipate heat
•12VDC Operation
VTC-IRLED24A
Alpha Series Bullet Camera
with 24 IR LEDs
4
VITEK LIMITED PRODUCT WARRANTY
VITEK products carry a three (3) year limited warranty. VITEK warrants
to the purchaser that products manufactured by VITEK are free of any
rightful claim of infringement or the like, and when used in the manner
intended, will be free of defects in materials and workmanship for a
period of three (3) years, or as otherwise stated above, from the date of
purchase by the end user. This warranty is non-transferable and extends
only to the original buyer or end user customer of a Vitek Authorized
Reseller.
The product must have been used only for its intended purpose, and
not been subjected to damage by misuse, willful or accidental damage,
caused by excessive voltage or lightning.
The product must not have been tampered with in any way then the
guarantee will be considered null and void.
This guarantee does not affect your statutory rights.
Contact your local VITEK Reseller should servicing become necessary.
Vitek makes no warranty or guarantee whatsoever with respect to prod-
ucts sold or purchased through unauthorized sales channels. Warranty
support is available only if product is purchased through a Vitek Author-
ized Reseller.
28492 Constellation Road ValenCia, Ca 91355
WWW.ViteKCCtV.CoM | 888-ViteK-70

black
2 3
SPECIFICATIONS
CAUTION:
To reduce the risk of electric shock, do not expose this apparatus to rain or moisture.
Only operate this apparatus from the type of power source indicated on the label.
The company shall not be liable for any damages arising out of any improper use, even if we have been advised of the pos-
sibility of such damages.
The lightning fl ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to
the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi cient
magnitude to constitute a risk of electric shock to persons.
This exclamation point within an equilateral triangle is intended to alert the user to the presence of impor-
tant operating and maintenance (servicing) instructions in the literature accompanying the appliance.
ROHS Announcement
All lead-free products offered by the company comply with the requirements of the European law on the
Restriction of Hazardous Substances (RoHS) directive, which means our manufacture processes and
products are strictly “lead-free” and without the hazardous substances cited in the directive.
The crossed-out wheeled bin mark symbolizes that within the European Union the product must be col-
lected separately at the product end-of-life. This applies to your product and any peripherals marked with
this symbol. Do not dispose of these products as unsorted municipal waste.
CE Mark
This apparatus is manufactured to comply with the radio interference.
The company does not warrant that this manual will be uninterrupted or error-free. We reserve the right to revise or remove
any content in this manual at any time.
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
Pick up Element
Number of Pixels
Resolution
Min. Illumination (IR ON)
Min. Illumination (IR OFF)
IR LED
Effective Range
S/N Ratio
Electronic Shutter
Lens
Lens Angle
Iris Mode
AGC
White Balance
Video Output
Power Source
Current Consumption
Water Resistance
Dimensions
Operation Temperature:
Weight
1/3” Color CCD image sensor
512(H) x 492(V)
420 TV lines
0 Lux
0.4Lux / F2.0
24 units
Over 50 Feet
More than 48dB (AGC off)
1/60 (1/50) to 1/100,000 second
3.6mm
92.6 / 78 / 54 / 38.6 Degrees
AES
AUTO
ATW
1.0Vp-p composite, 75 Ohms
DC12V ± 10%
90mA (IR OFF), 330mA (IR ON)
IP67
2.48” x 2.28” x 4.06” (63 x 58 x 103.2mm)
0~104°F / 0~40°C
12.17 Oz. (345g)
NOTE: Please use the correct power adaptor, DC12V (regulated), to operate this unit. The toler-
ance of this unit is DC12V ± 10%. Over the maximum DC12V power input will damage the video
output connector (VIDEO OUT).
If power cable must be extended, use the enclosed power lead with 2.1mm plug (model# VT-
ME172-4101) and splice into a 2 conductor extension wire with a gauge with thickness appro-
priate with the distance limitations to avoid power loss. Please check appropriate sources to
determine the resistance per foot for the wire being used.
PACKAGE CONTENTS
CONNECTION
1 x VTC-IRLED24A Camera
1 x Mounting Bracket
1 x Power extender lead (VT-ME172-4101)
1 x User Manual
1. Connect the camera video output to
the monitor video input with a 75Ω coaxial
cable.
2. DC12V Input Terminal
Connect the power connector of the cam-
era to a 12V DC regulated power supply.