Vitek VTD-A4F/IWM User manual

black
VITEK
Alpha Mega Series
Indoor Dome
Cameras
• 1000 TV Lines of Resolution (1.39 MegaPixel)
• 1/2.9” Sony® CMOS Sensor
• Highly Advanced EN773E Digital Signal
Processor
• 3.6mm Fixed & 2.8-12mm Varifocal Lens
Options
• Available with 35 IR LEDs (120’ Range)
• Advanced OSD Functions: WDR, 3D DNR, DSS,
DIS, Sens-up, Motion Detection, Privacy
• Secondary Video Output (Cable Included)
• 3-Axis Mount for Optimum Viewing Angle
• 12VDC/24VAC Dual Voltage Operation

Table of ConTenTs
BOX CONTENTS / MOUNTING ACCESSORIES 2
AVAILABLE MODELS 3
VTD-A4F/IM INSTALLATION 4
VTD-A2812/IM INSTALLATION 5
VTD-AR2812/IM INSTALLATION 6
INSTALLATION TIPS 7
SETUP MENU 8
OSD OPERATION 9-19
DIMENSIONS 20
SPECIFICATIONS 21-23
NOTES 24-26
1

black
1) Alpha Mega Dome Camera
2) Mounting Accessories
3) Secondary Video Output Cable
4) This instruction Manual & Mounting Template
Self Tapping Screws
For attaching the housing base to a
solid surface.
Type #: Phillips ST4x30
Qty: 4 (2 screws - VTD-A4F/IM)
Secondary Video Output Cable
To be used with a service monitor for
adjusting
the angle, focus and zoom.
Qty: 1
BOX CONTENTS AVAILABLE MODELS / ACCESSORIES
1) Dome Camera
2) Mounting Accessories
3) This instruction Manual & Mounting Template
VTD-A4F/IB / VTD-A4F/IW
620TVL Indoor Color Dome Camera with Fixed Lens.
VTD-A2812/IB / VTD-A2812/IW
620TVL Indoor Color Dome Camera with 2.8~12mm DC Auto Iris Lens.
VTD-AR2812/IB / VT-AR2812/IW
620TVL Indoor Color Dome Camera with 2.8~12mm DC Auto Iris, IR
Corrected Lens & 35 IR LEDs.
BOX CONTENTS
Self Tapping Screws
For attaching the housing base to a solid surface.
Type #: Phillips ST4x30
Qty: 4
Secondary Video Output Cable
To be used with a service monitor for adjusting
the angle, focus and zoom.
Qty: 1
BOX CONTENTS AVAILABLE MODELS / ACCESSORIES
1) Dome Camera
2) Mounting Accessories
3) This instruction Manual & Mounting Template
VTD-A4F/IB / VTD-A4F/IW
620TVL Indoor Color Dome Camera with Fixed Lens.
VTD-A2812/IB / VTD-A2812/IW
620TVL Indoor Color Dome Camera with 2.8~12mm DC Auto Iris Lens.
VTD-AR2812/IB / VT-AR2812/IW
620TVL Indoor Color Dome Camera with 2.8~12mm DC Auto Iris, IR
Corrected Lens & 35 IR LEDs.
BOX CONTENTS
Self Tapping Screws
For attaching the housing base to a solid surface.
Type #: Phillips ST4x30
Qty: 4
Secondary Video Output Cable
To be used with a service monitor for adjusting
the angle, focus and zoom.
Qty: 1
boX ConTenTs
BOX CONTENTS / MOUNTING ACCESSORIES 2
AVAILABLE MODELS 3
VTD-A4F/IM INSTALLATION 4
VTD-A2812/IM INSTALLATION 5
VTD-AR2812/IM INSTALLATION 6
INSTALLATION TIPS 7
SETUP MENU 8
OSD OPERATION 9-19
DIMENSIONS 20
SPECIFICATIONS 21-23
NOTES 24-26
MounTing aCCessories
2

aVailable MoDels
3
VTD-A4F/IWM
Alpha Mega Series 1000 TVL (1.39MP) Indoor Fixed 3.6mm
Dome - Ivory
VTD-A2812/IWM
Alpha Mega Series 1000 TVL (1.39MP) Indoor 2.8-12mm Varifocal
Dome - Ivory
VTD-AR2812/IWM
Alpha Mega Series 1000 TVL (1.39MP) Indoor 2.8-12mm Varifocal
Dome & 35 IR LEDs - Ivory
VTD-A2812/IBM
Alpha Mega Series 1000 TVL (1.39MP) Indoor 2.8-12mm Varifocal
Dome - Black
VTD-A4F/IBM
Alpha Mega Series 1000 TVL (1.39MP) Indoor Fixed 3.6mm
Dome - Black
VTD-AR2812/IBM
Alpha Mega Series 1000 TVL (1.39MP) Indoor 2.8-12mm Varifocal
Dome & 35 IR LEDs - Black

black
VTD-a4f/iM insTallaTion
a
4
* See Installation Tips on page 7

VTD-a2812/iM insTallaTion
5
a
/ DC12V
DualPower
* See Installation Tips on page 7

black
a
/ DC12V
DualPower
6
VTD-ar2812/iM insTallaTion
* See Installation Tips on page 7

7
insTallaTion Tips
1.) Power Consumption - Amperage/Voltage
It is of utmost importance that the proper Voltage and Amperage is used when
applying power to your VITEK Alpha Series Dome Camera. They can be pow-
ered by either 12V DC or 24V AC (except for the model VTD-A4F/IM - 12V DC
only). Always use a UL Listed power transformer.
The Voltage must be measured at the camera location. It is very important that
the camera receives no less than the required Voltage or it will be “Starved”
and eventually die out. Cameras with Infrared LEDs require substantially more
Amperage than others so please refer to the Specications (page 21-23) for
the camera you are installing.

black
8
seTup Menu

9
osD operaTion
Please press joystick down
The Main Menu is displayed on monitor.
joystick
yellow
Push the joystick up or down to highlight the function you wish to change.
Settings can be made using the Joystick located on the rear of the camera.

black
10
osD operaTion
joystick
joystick
joystick
joystick
MAIN MENU
pressing

11
osD operaTion
When the Main Menu screen is displayed move highlighted area to EXPOSURE
using the up/down of the joystick and then press down on the joystick to enter EXPOSURE Mode.
Highlight section to change by using joystick Up/Down. After section is highlighted us joystick
Left/Right to adjust settings.
Brighter video can be obtained by increasing the exposure
time at night with SENS-UP. SENS-UP is the maximum
integration of frames by DSS(Digital Slow Shutter) in low light.
When “SENS_UP” is on, shutter cannot be adjusted.
BRIGHTNESS: Adjusts the brightness of video(0~20).
LENS: When using the built-in lens, select either Manual (default) or DC.
When selecting Manual choose which Shutter speed to use.

black
12
osD operaTion
When in the MAIN MENU highlight WHITE BAL by using the joystick up/down.
Select mode by moving joystick left or right.
This mode is for use in Halogen or extremely bright white light.
Joystick left to decrease, joystick right to increase.
Joystick left to decrease, joystick right to increase.

13
osD operaTion
Adjust from 0~10 by using joystick left or right.
Used to inverse the picture.
corners
Adjust from 0~20 by using joystick left or right.
OFF, LOW, MIDDLE, HIGH, ACE performs an image enhancement process to enhance the image
by changing the brightness value.

black
14
osD operaTion
Adjust from 0~20 by using joystick left or right.
Adjust from 0~20 with 0 being the left most area.
Adjust from 0~20 with 0 being the top area.
Adjust from 0~20 with 0 being the smallest area.
Adjust from 0~20 with 0 being the smallest area.
This function extends the gain range of the screen that is useful if
the camera takes a simultaneous picture of both indoor and
outdoor. It improves contrast of the picture in outdoor scenery as
well as indoor. Video image is processed from two images by dual
shutter (long and short shutter) in a eld to provide the best
dynamic range. Highlight area is compensated by the short shutter
and dark area is compensated by the long shutter. Final video may
have less contrast compared to the conventional camera which
does not have WDR function.

15
osD operaTion
DAY or NIGHT is determined by the built-in light photo sensor. Camera with IR LED must be set to EXTERN
Used when DAY or NIGHT is determined by light level through the lens and DAY from/to NIGHT is switched
automatically by the scene brightness.

black
16
osD operaTion
DNR is a technique of removing image noise from a video signal by applying a digital comb lter.
It makes images clearer and reduces video le size.
This Product has a feature that allows you to observe movement in 3 dierent areas on the screen and the
word MOTION will appear on screen when motion is detected.

17
osD operaTion
SENSITIVITY: Adjust from 0~20 by using joystick left or right.
OBJ. KEEP LV: Adjust from 0~60 by using joystick left or right.
MOTION EST: Adjust from 0~20 by using joystick left or right.
WINDOW TONE: Adjust from 0~6 by using joystick left or right.
WINDOW ZONE: Adjust from 0~4 by using joystick left or right.
DET H-POS: Adjust from 0~60 by using joystick left or right.
DET V-POS: Adjust from 0~40 by using joystick left or right.
DET H-SIZE: Adjust from 0~40 by using joystick left or right.
DET V-SIZE: Adjust from 0~40 by using joystick left or right.

black
18
osD operaTion
SHAKE SCALE: Adjust from 0~20 by using joystick left or right.
BRIGHT SCL: Adjust from 0~20 by using joystick left or right.

19
osD operaTion
SERIAL: N/A
PEDESTAL: Adjust from 0~20 by using joystick left or right.
After entering FOCUS ADJ a box with 3 dierent boxes
within will appear on screen. Each box is to aid in focusing
of dierent scene contrasts, LEFT box for low contrast
MIDDLE box for medium contrast and RIGHT box for high
contrast. Adjust focus so no green will be in box of
selected contrast.