
2 3
ASSEMBLY STEPS
STEP 1
PACKAGE CONTENTS
TOOLS NEEDED
Phillips
Screwdriver
A (x4)
Pole
B(x2)
Base
C(x2)
Shelf
D (x8)
M6x30
E(x8)
M6x15
F (x16)
M6 Nut
G (x8)
M6x25
H (x1)
4mm Allen Key
I (x8)
Pad
STEP 2
Assemble poles (A) to base
using bolts (G).
Assemble shelf (C) to poles
(A) using bolts (G).
44lbs
(19.96kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF SPEAKER OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
Screw shelf spikes (E) into
shelf (C), and secure with
nuts (F).
STEP 3
STEP 4
OPTION A
Screw floor spikes (D) into base (B), and secure
with nuts (F).
NOTE: Floor spikes can be adjusted to level the
stand.
OPTION B
Apply pads (I) to base (B).