KREAFUNK aCOUSTIC User manual

Operation manual
Bedienungshandbuch
Manual de instrucciones
Manuel d’utilisation
Brugermanual
Manuale operativo
󰪞󰠜
aCOUSTIC
Premium Bluetooth speaker
FLIP for Basic Functions

2

3
This product is in compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU.
The declaration of conformity may be consulted at:
www.kreafunk.com/declaration-of-conformity/
English 4
Deutsch 20
Español 36
Français 52
Dansk 68
Italiano 82
Chinese󰭘 98

4English
English
Operation manual

5
English
SAFETY AND MAINTENANCE INSTRUCTIONS
1. Please read this operation manual carefully before use.
2. The safety and maintenance instructions in this operation manual
should be retained for future reference and must be followed at all
times.
3. Keep the product away from heat sources such as radiators, heaters or
other appliances that produce heat.
4. Do not expose the product to direct sunlight for longer periods. High
temperatures will shorten the life of the product, destroy the battery and
distort certain plastic parts.
5. Do not expose the product to extreme cold as it may damage the
internal circuit board.
6. Avoid liquids getting into the product.
7. Do not throw with or stamp on the product. This may damage the
internal circuit board.
8. Do not try to disassemble the product. This must only be done by a
professional.
9. Do not use concentrated chemical products or detergent to clean the
product.
10. Keep the surface away from sharp things, as these may cause damage
to the plastic parts.
11. Use 5V / 1A power supplies only. The connection of power supplies with
higher voltage may lead to severe damage.
12. Donotarbitrarilydiscardorplacethelithiumbatterynearreorintense
heat in order to avoid a risk of explosion.

6English
If you do experience any problems with your product please contact the
retailer you purchased the product from. The retailer will provide you with
guidance and if that does not solve the problem, the retailer will handle the
claim directly with KREAFUNK.

7
English
Reset
0:02
5W
USB-C 5V/1A

8English
CONNECT & PLAY
1
1x
Press the multifunction button (K) to turn aCOUSTIC on. The LED indicator
will light up white and a sound prompt is heard.

10 English
MANUAL BLUETOOTH® PAIRING MODE
0:02
aCOUSTIC will always re-connect to last connected device, when turned on.
If you wish to connect a new device, you can manually activate Bluetooth®
pairing mode:
Press and hold the multifunction button (K) to activate Bluetooth pairing
mode.TheLEDindicatorwillashwhiteandyoucannowpairaCOUSTIC
with a new device.

11
English
MULTI-FUNCTIONS
1x 2x 3x 0:02

12 English
1x
1x
0:02

13
English
VOICE ASSISTANT FUNCTION
You can use your device’s Voice Assistant through the built-in microphone
on aCOUSTIC. Activate your Voice Assistant by triple-pressing the Play
button.TheLEDindicatorwillashwhiteandthebuilt-inmicrophonewill
pick up your voice commands.
When having two aCOUSTICs playing in TWS mode, only one aCOUSTIC can
activate the microphone for Voice Assistant. When activating your Voice
Assistant,theLEDindicatorwillashwhiteonthespeakerthatlistensto
your commands.
3x

14 English
BATTERY AND CHARGING
USB-C 5V/1A
Orange
0-99 %
Green
100 %
5W

15
English
CHARGING
Charging time is approximately 5 hours using the included USB cable. The
LEDindicatorashesorangewhencharging.TheLEDindicatorturnssolid
green when the battery is fully charged.
WIRELESS CHARGING
aCOUSTIC can be charged via the USB-C input or by being placed on a QI®
certiedwirelesschargingpad.WhenaCOUSTICischargingcorrectly,the
LEDindicatorwillashorange.Whenthebatteryisfullycharged,theLED
indicator will turn solid green until aCOUSTIC is removed from the QI®
certiedchargingpadorthechargingcableisunplugged.
ChargingtimeonaQI®certiedchargingpadisapproximately8hours.

16 English
BATTERY STATUS
White
LED Battery Status
15-100 %
<15 %
<10 %
0-99 %
100 %
Red
Flashing Red
Orange
Green
When the battery level is below 15%, the LED indicator turns solid red. When
thebatterylevelisbelow10%,theLEDindicatorashesred.
aCOUSTICwillautomaticallyswitchowhennotinusefor60minutes.

17
English
TRUE WIRELESS STEREO PAIRING
1
L R
0:02
1x
12
Purple
aCOUSTIC can pair with another aCOUSTIC and play in True Wireless Stereo
(TWS).
Turn on both aCOUSTICs. Press and hold the multifunction button (K) on
the primary speaker. Simultaneously press the (+) button to activate TWS
pairingmode.TheLEDindicatorontheprimaryspeakernowashespurple.
Press and hold the multifunction button on the secondary speaker to
connect in TWS.

18 English
2
L R
The two aCOUSTICs will automatically pair, the LED indicator will turn solid
white on both speakers and a sound prompt will be heard.

19
English
Make sure your device is paired to the primary speaker. You are now ready
to play in True Wireless Stereo.
The two aCOUSTICs will automatically reconnect in TWS mode when both
speakers are turned on, until TWS pairing mode is manually activated again
on one of the speakers.

20 Deutsch
Deutsch
Bedienungshandbuch