SUPERTOOTH BTD4 User manual

SuperTooth
BTD4

SuperTooth BTD4
SuperTooth BTD4 is a portable, powerful wireless speaker featuring NFC
technology. Users can strea usic wirelessly fro any cell phone, tablet,
co puter, laptop or Mp3 player supporting Bluetooth A2DP*. The SuperTooth
BTD4 co es with 3.5 stereo jack cable for devices that do not support
Bluetooth A2DP.
Product Overview
Charging the SUPERTOOTH BTD4
1. Connect the charger’s plug into the Charger Port of the SuperTooth BTD4.
Connect the charger to an external power source or to your co puter USB.
2. The Charge Indicator will light red while charging.
Turning the SUPERTOOTH BTD4 On and Off
Power On: Press and hold the MFB button for 3 seconds. A power on beep will
be heard on the speaker.
Note: At first ti e use, turning on the SuperTooth BTD4 will
auto atically go to pairing ode (ready to be pair).
Power Off: Press and hold the MFB button for 3 seconds. A power off beep will
be heard on the speaker.
*A2DP (Advanced Audio Distribution Profile) is a technology enabling to strea stereo sound fro an audio source
(phone, co puter or laptop) to a stereo speaker or headset via Bluetooth. To do so both devices ust support this profile.
2
MFB
Button
LED
Indicator
Charger
Port
tPlug
Line-in
Port
Back View
Front View
Speaker

Pairing the SuperTooth BTD4 with your Bluetooth 2DP phone
Pair the SuperTooth BTD4 to your phone to create the link or audio connection
between the two. Pairing should be done at first connection to a phone.
NFC Pairing:
1. Turn “ON” the SuperTooth BTD4.
2. Place your NFC supported phone on top of the speaker (see i age above).
3. The speaker will go to pairing ode (a pairing beep will be heard on the
speaker and the LED indicator will turn red/blue alternately) and your phone
will pro pt for pairing connection.
4. Follow the pairing pro pts on your phone until pairing is finished.
5. Pairing is successful if the LED indicator blinks blue every 3 seconds.
6. The SuperTooth BTD4 is now ready to use with your phone.
Pairing from Off:
1. Fro Off, Press and hold the MFB button for 8 seconds until the LED
indicator flashes red/blue alternately. This indicates that the SuperTooth
BTD4 is ready to be paired.
2. While the SuperTooth BTD4 is in pairing ode, access the Bluetooth enu of
your phone. Turn on its Bluetooth function then execute a Bluetooth search to
find the SuperTooth BTD4. (See your phone’s anual).
3. When the phone displays the list of Bluetooth devices, select ST DISCO4.
4. If the phone asks for the password/pin code, enter 0000 and press OK.
5. Pairing is successful if the LED indicator blinks blue every 3 seconds.
6. The SuperTooth BTD4 is now ready to use with your phone/device.
Pairing from On:
1. Fro On, Press and hold the MFB button for 5 seconds until the LED
indicator flashes red/blue alternately. This indicates that the SuperTooth
BTD4 is ready to be paired.
Note: if the button is released at 3 seconds, it will just turn off the speaker.
2. Follow the step no. 2 up to 5 of “Pairing fro Off”.
3. The SuperTooth BTD4 is now ready to use with your phone/device.
3

Using the SUPERTOOTH BTD4 with your Bluetooth 2DP phone
IMPORTANT: The SuperTooth BTD4 needs to be “paired” with your phone first.
Please refer to Pairing the SuperTooth BTD4 with your Phone.
Streaming Music from an 2DP Phone
1. Go to your phone’s usic player and play a track by pressing “Play” on your
player or short press the MFB button on the speaker. If the SuperTooth BTD4
is connected, the usic will be heard directly in the speaker. See your
phone’s anual if needed.
2. Audio is now on the SuperTooth BTD4. At this point, the LED indicator blink
blue slowly every 3 seconds indicating that phone is strea ing with the
SuperTooth BTD4.
SUPERTOOTH BTD4 Button Functions (for Bluetooth connections only)
The SuperTooth BTD4 can play and pause through MFB Button.
To play a track, short press the MFB Button on the speaker.
To pause a track, short press the MFB Button on the speaker.
Other control functions can be done through your phone (like: volu e
adjust ent, go to next or previous song, rewind or fast forward of usic). See
your phone’s anual if needed.
Reconnecting the SUPERTOOTH BTD4 with a Bluetooth 2DP phone
1. Turning ON the SuperTooth BTD4 will auto atically reconnect to the last use
device.
2. When you leave the Bluetooth operating range while the SuperTooth BTD4 is
ON, it will disconnect fro your phone (the speaker LED indicator will be
blinking green). To reconnect, you have 2 options:
a. short press the MFB Button of the speaker to reconnect on your phone or
b. si ply place your NFC featured phone on top of the speaker. A
connected beep will be heard and the speaker LED indicator will turn to
blinking blue.
4

Using the SUPERTOOTH BTD4 with a Non-Bluetooth Mp3 Player
You can connect directly a MP3 player via Stereo Line Input at the back of the
SuperTooth BTD4.
1. Plug the audio cable into the Stereo Line Input found at the back of the
SuperTooth BTD4 and the other end to the output of your usic player.
2. Press play on your usic player to strea usic directly to the SuperTooth
BTD4.
3. Please use the buttons of your usic player directly to control your usic.
Clear pairing list
To clear the pairing list of the speaker
Turn the speaker to pairing ode (LED indicator flashes red/blue alternately)
then double press the MFB button. A beep will be heard and the LED indicator
will blink violet shortly then will flash red/blue alternately again. The pairing List is
now erased.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection syste s).
This arking shown on the product or its literature, indicates that it should not be disposed with
other household wastes at the end of its working life. To prevent possible har to the
environ ent or hu an health fro uncontrolled waste disposal, please separate this fro other
types of wastes and recycle it responsibly to pro ote the sustainable reuse of aterial resources.
Household users should contact either the retailer where they purchased this product, or their
local govern ent office, for details of where and how they can take this ite for environ entally
safe recycling.
Business users should contact their supplier and check the ter s and conditions of the purchase contract.
This product should not be ixed with other co ercial wastes for disposal.
This product has an e bedded, non-replaceable battery, do not atte pt to open the product or re ove the
battery as this ay cause injury and da age the product. Please contact the local recycling facility for
re oval of the battery. The e bedded, non-replaceable battery is designed to last the life ti e of the
product.
+
5

FCC/IC statements :
Federal Co unications Co ission (FCC) State ent
Industry Canada (IC) State ent
15.21
You are cautioned that changes or odifications not expressly approved by the part responsible for
co pliance could void the user’s authority to operate the equip ent.
15.105(b)
This equip ent has been tested and found to co ply with the li its for a Class B digital device, pursuant to
part 15 of the FCC/IC rules. These li its are designed to provide reasonable protection against har ful
interference in a residential installation. This equip ent generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, ay cause har ful interference to
radio co unications. However, there is no guarantee that interference will not occur in a particular
installation. If this equip ent does cause har ful interference to radio or television reception, which can be
deter ined by turning the equip ent off and on, the user is encouraged to try to correct the interference by
one or ore of the following easures :
-Reorient or relocate the receiving antenna.
-Increase the separation between the equip ent and receiver.
-Connect the equip ent into an outlet on a circuit different fro that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device co plies with Industry Canada licence-exe pt RSS standard(s)
Operation is subject to the following two conditions :
1)This device ay not cause interference and
2)This device ust accept any interference, including interference that ay cause undesired operation of
the device.
FCC/IC RF Radiation Exposure Statement :
This equip ent co plies with FCC/IC radiation exposure li its set forth for an uncontrolled environ ent.
End users ust follow the specific operating instructions for satisfying RF exposure co pliance. This
trans itter ust not be co-located or operating in conjunction with any other antenna or trans itter.
The Bluetooth® word ark and logos are registered trade arks owned by Bluetooth SIG, Inc. and any use
of such arks by Euro-CB is under license. Other trade arks and trade na es are those of their respective
owners.
English
English
Hereby
Hereby, , Euro CB Phils inc Euro CB Phils inc, , represented represented by by MARCHANT MARCHANT, , CEO CEO, , declares declares that that the the MODEL MODEL BTD4 BTD4, , is is in in
co pliance
co pliance with with the the essential essential require ents require ents and and other other relevant relevant provisions provisions of of Directive Directive 1999/5/ 1999/5/EC EC of of the the
European
European Parlia ent Parlia ent and and of of the the Council Council of of 9 9 March March 1999 1999 on on radio radio equip ent equip ent and and teleco unications teleco unications
ter inal
ter inal equip ent equip ent and and the the utual utual recognition recognition of of their their confor ity confor ity. .
For
For the the whole whole declaration declaration please please visit visit : :
http
http :// :// www www . . SuperTooth SuperTooth .net/ .net/ download download
Euro CB Phils inc
Euro CB Phils inc
SFB2, MEPZ1
SFB2, MEPZ1
6015 Lapu-lapu city
6015 Lapu-lapu city
Cebu Philippines
Cebu Philippines
NCC Statement:
根據低功率電波幅射性電機管理辦法規定:
第十二條: 經型 認證合格之低功率射頻電機，非經許可，公司、行號或使用者均不得擅自變更頻率，加大功率或變更原設計之特性及功能。
第十四條: 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。
低功率射頻電機須忍受合法通信或工業、科學及醫療用電波幅射性電機設備之干擾。
6