Vivitar 39056 Digital Camera User manual

39056
Night Vision Camcorder
User Manual
© 2009-2012 Sakar International, Inc. All rights reserved.
Windows and the Windows logo are registered trademarks of Microsoft Corporation.
All other trademarks are the property of their respective companies.

1
Contents
Introduction .................................................................................................................................. 2
What’s Included............................................................................................................................ 2
Parts of the Camcorder ................................................................................................................ 3
Initial Camcorder Setup................................................................................................................ 4
Main Camcorder Modes............................................................................................................... 8
Camcorder Technical Specifications............................................................................................. 9
Computer System Requirements ............................................................................................... 10
Using Your Camcorder................................................................................................................11
Changing Camcorder Mode ........................................................................................................11
Navigating the Modes................................................................................................................. 12
Camcorder Features: Infrared Night Vision Light, ViviLink, Resolution ...................................... 13
Video Capture Mode .................................................................................................................. 15
Photo Capture Mode.................................................................................................................. 17
Playback Mode........................................................................................................................... 19
Setup Mode................................................................................................................................ 23
Installing the Software................................................................................................................ 25
Connecting the Camcorder to the Computer.............................................................................. 26
Getting Photos and Videos from the Camcorder to the Computer ............................................. 27
Get Started!................................................................................................................................ 28
Transferring Media from the Camcorder to the Computer Manually........................................... 28
Camcorder Maintenance............................................................................................................ 30
Sakar Warranty Card.................................................................................................................. 30
Technical Support....................................................................................................................... 31
Troubleshooting.......................................................................................................................... 31

2
Introduction
Thank you for purchasing this digital video recorder. Everything you need to take quality digital
photos and videos is included with your camcorder.
Vivitar makes capturing those special moments as easy as possible.
Please read this manual carefully first in order to get the most out of your digital camcorder.
Note:
Your digital camcorder supports an SD Memory Card (up to 32GB).
In order to use your digital video recorder normally, it is strongly recommended to insert
the SD Memory card before use.
SD Memory cards are not included and need to be purchased separately.
What’s Included
1. Digital Camcorder
2. USB cable
3. Vivitar Experience Image Manager
software Installation CD
Note: SD Memory Card not included.

3
Parts of the Camcorder
1. Power Button
9. Camera Strap Hooks
2. MODE Button
10. ViviLink Button
3. Zoom Control Lever:
T (UP) / W (DOWN) Button (Zoom In/Zoom Out)
11. Shutter/Record/OK Button
12. Lens
4. SD Card Slot
13. Microphone
5. Delete/IR Flash Button
14. Battery Compartment Cover
6. LED Indicator Light
15. LCD Screen
7. Resolution Button
16. IR Lights
8. USB Port

4
Initial Camcorder Setup
Installing the Batteries
Installing the Memory Card
Insert 4 x AA batteries (1.5V).
Alkaline batteries recommended.
Batteries not included.
Insert SD Memory card (up to 32GB)
before use.
Turning On the Camera
Using the Camera

5
When powering the camera ON for the first time the camera will take you through the initial
camera setup.
Powering the Camcorder ON
1. Batteries
Make sure the batteries have been inserted properly into your digital camera, according to
the polarity shown inside the battery compartment.
Use 4 x AA (1.5V) batteries.Alkaline batteries are recommended. (Batteries not included.)
Note:
Remove the batteries from the camera when not in use for an extended period.
Do not mix alkaline and non-alkaline batteries.
Some features, such as Flash, will not work if the battery power level is low.
When the battery power is low the battery icon turns red and the camera will
automatically turn off a few seconds later.
Rechargeable batteries not recommended.
The energy status of the power is displayed on LCD as shown below:
Full battery power Medium battery power Low battery power
2. SD Card
Make sure an SD card has been properly inserted into your camera. (SD card not
included.)
To properly insert the SD Card:
Push the SD card into the slot in the direction shown on the camera (see SD icon by the
SD card slot). Push the SD card until you hear a slight clicking sound. This indicates the
SD card has been inserted correctly.

6
Note:
After the camera is powered on, an SD icon will appear on the LCD display. If you do not
see the SD icon on the display, please check if the card was inserted properly.
Make sure the SD card is not locked (check the lock switch on the side of the SD card). If
the SDcard is locked this will prevent the camera from saving captured photos to the SD card.
3. Power On
Press the POWER button to turn on the camera.
Setting the Camera Language
1. You will first be prompted to select a language for the camera. The Language selection
menu will appear. Select the language of your choice by pressing the UP / DOWN button.
Then press the OK / Shutter button to confirm the selection.
2. After selecting a language, you will be asked if you would like to continue with the initial
camera setup. A message will appear: “Continue with Camera Setup?”
Select “Yes” to continue or “No” to exit the setup.
Note: If you select “No” and decide to leave the camera setup, the camera will be set to its default
settings. These settings can be adjusted at any time manuallythrough the menus in the camera.

7
Setting the ViviLink Default Option
Once the Language has been set, you will be asked to set the default ViviLink destination for
photos and videos taken with your camera.
The ViviLink technology allows you to quickly and easily upload your camera’s photos and videos
to the social networks of your choice with the accompanying software application.
1. First you will be asked to choose the default ViviLink social network for Photos. Use the UP /
DOWN button to highlight the desired default social network and press the OK / Shutter
button to confirm the selection.
2. Next you will be asked to choose the default ViviLink social network for Videos. Use the UP /
DOWN button to highlight the desired default social network and press the OK / Shutter
button to confirm the selection.
Congratulations! Your camcorder is now ready to use.

8
Main Camcorder Modes
Your camcorder has different modes for the various camera functions.
You can switch modes by pressing the MODE button on your camera after the camera has been
powered ON.
Video Capture Mode
Use this mode to capture videos with your digital camcorder.
This is the default mode when the camcorder is powered ON.
To take a video, aim your camera as desired and press the Shutter button to start the
recording. A blinking, red record indicator appears on the LCD screen while the recording
is in progress. To stop recording, press the Shutter button again. The video is
automatically saved to your camera’s memory card.
Photo Capture Mode
Use this mode to capture pictures with your camera.
After turning on your camcorder, press the MODE button and select ‘DSC’ to open the
Photo Capture mode.
To take a picture, aim your camera as desired and press the Shutter button.
The picture is automatically saved to your camera’s memory card.
Playback Mode (Photos & Videos)
Use this mode to view and manage the videos and photos on your camera.
After turning on your camera, press the MODE button and select ‘Playback’ to open the
Playback mode for photos and videos. You can scroll through the photos and videos that
you’ve previously taken to view or delete them as desired.
Setup Mode
Use this mode to select your camcorder settings.
After turning on your camera, press the MODE button and select ‘Setup’ to open the
camcorder setting menu options.

9
Camcorder Technical Specifications
Image Sensor
CMOS Sensor
Image Resolution
2048x1536 (3M), 1920x1080 (2M),
1080x1024 (1.3M), 640x480 (VGA)
Video Resolution
640x480 (VGA ) pixels, 320x240 (QVGA) pixels
File Format
JPEG ; AVI
External Memory
SD Memory Card (up to 32GB)
LCD Display
2.0 Inch TFT
Lens
f=4.8mm, F=2.6mm
Zoom
4X Digital Zoom
ISO
Auto / 100 / 200 / 400
Flash
IR (Infrared) Lights
Microphone
Yes
Frequency
50 Hz, 60 Hz
Auto Power Off
60 seconds (default)
Language
English, French, Spanish, Portuguese, German, Dutch, Italian,
Russian, Turkish
Interface
USB 2.0
System Requirements
Windows XP (SP 3), Vista (SP1) and 7 ;
Mac OSX v10.5.x and above
Battery
4 X AAA (1.5V)
Working Temperature
0~40 C

10
Computer System Requirements
WINDOWS OS
To be able to download photos and videos to your PC using the Vivitar Experience Image
Manager Software, you will need the following minimum configuration:
Microsoft®Windows XP with Service Pack 3,Windows Vista with Service Pack 1 or Windows 7
Pentium® 4 processor (or above)
1 GB of RAM, with 250 MB of free hard disk space
16-bit Color monitor, 1024 X 768 recommended screen resolution
CD-ROM Drive
QuickTime® 6 or higher
Microsoft® Internet Explorer 7 or higher
Windows Media Player 10 or higher
DirectX 9 or higher
Internet connection required
MACINTOSH OS
To be able to download photos and videos to your Macintosh using the Vivitar Experience Image
Manager Software, you will need the following minimum configuration:
Intel processor running Mac OS X v10.5.x or later
1 GB RAM, 250 MB free hard disk space
Display: 1024 x 768 or higher-resolution monitor
QuickTime® 6 or higher
CD-ROM Drive
Internet connection required

11
Using Your Camcorder
Make sure the batteries have been inserted properly into your digital video camera.
If your camcorder comes with a rechargeable lithium battery, make sure it is fully charged
before the first use.
Make sure an SD card has been inserted into your camcorder.
Powering the camcorder ON
Press the Power button to turn your camcorder ON.
The camcorder will be in Video Capture mode to start.
Powering the camcorder OFF
While the camcorder is on, you can press the Power button again at any point to turn your
camcorder OFF. You will see a “Goodbye” splash screen and then the camcorder will power off
completely.
Note: Your camcorder also has an Auto Power Off feature that automatically turns off your
camcorder after 60 seconds that your camcorder is left idle.
Changing Camcorder Mode
Your camcorder has four main modes:
1. Video Capture Mode - Use this mode to capture videos with your camcorder.
2. Photo Capture Mode (DSC –Digital Still Camera) - Use this mode to capture photos
with your camcorder.
3. Playback Mode (for photos and videos) - Use this mode to view the photos and videos
you have already taken with your camcorder.
4. Setup Mode - Use this mode to select your camcorder settings.

12
When the camcorder is first powered ON, the Video Capture Mode is active. The icons that
appear on the LCD screen are the best default settings so that you can begin to capture and
enjoy clear quality videos and photos.
To change the active camcorder mode, make sure the camcorder is powered ON and press the
MODE button.
When in Video Capture Mode, this icon displays on the top-left corner of the LCD display
When in Photo Capture Mode, this icon displays on the top-left corner of the LCD display
When in Playback Mode, this icon displays on the top-left corner of the LCD display
Navigating the Modes
To change the camcorder mode:
1. Press the MODE button.
2. The Mode menu appears.
3. Press the UP / DOWN button to highlight one of the following Mode options:
Video Video Capture Mode
DSC Photo Capture Mode
Playback Playback Mode for Videos and Photos
Setup Camcorder Settings
4. Press the OK / Shutter button to select and save the highlighted Mode option.
Note: At any time you can press the MODE button to exit the Mode menu and return to
the previous screen.

13
Camcorder Features: Infrared Night Vision Light, ViviLink, Resolution
Infrared Night Vision Light
Your digital video recorder includes the IR Night Vision Light feature. These features increase the
lighting in dark settings.
The camcorder is set by default to IR OFF, with the following icon appearing on the LCD
indicating that the IR Light is OFF:
To access the IR Night Vision Light while in Video Capture Mode or Photo Capture Mode:
1. Press the DELETE button. The IR Night Vision Lights turn on.
2. The following icon appears on the LCD indicating that the IR Light is ON:
ViviLink
The ViviLink technology allows you to quickly and easily upload your camcorder’s videos and
photos to the social networks of your choice with the accompanying Vivitar Experience Image
Manager application.
The ViviLink feature is deactivated by default.A ViviLink destination will only be assigned to a
video or photo if you manually set it from the ViviLink menu.
You can access the ViviLink menu options from the Video Capture Mode, Photo Capture Mode
and Playback Mode.
To select a ViviLink destination:
1. Press the ViviLink button.
2. The ViviLink menu appears according to your selected camcorder mode.
The following are the ViviLink options:
ViviLink for Videos:
ViviLink for Photos:
YouTube
Facebook
Flickr
Photobucket
Twitgoo
MySpace
Flickr
Twitpic
Picasa Albums
N
None
Photobucket
N
None

14
3. Press the UP / DOWN button to highlight the desired ViviLink option.
4. Press the OK / Shutter button to select and save the highlighted option.
Note: At any time you can press the ViviLink button to exit the ViviLink menu and return
to the previous screen.
ViviLink: Video Capture/Photo Capture Modes
In Video Capture and Photo Capture Modes, the selected ViviLink destination site icon
appears on the LCD while capturing your video or taking your photo. Remember, the
ViviLink needs to be set manually for each image before you begin the video or photo
capture.
ViviLink: Playback Mode
In Playback Mode, if your captured image was taken with a ViviLink destination, the
ViviLink destination site icon appears on the captured image. You can change or add the
ViviLink by pressing the ViviLink button and selecting a different ViviLink destination from
the menu options.
Resolution
The Resolution (Image Size) menu allows you to choose the desired size of the images taken by
your camcorder. Keep in mind that videos and photos captured with a higher resolution will also
take up more memory on the SD memory card.
To change the Resolution:
1. Press the RESOLUTION button.
2. The Resolution menu appears according to your selected camcorder mode.
The following are the Resolution options:
Video Capture Mode Resolutions:
Photo Capture Mode Resolutions:
VGA
640 x 480
3M
2048 x 1536
QVGA
320 x 240
2MHD
1920 x 1080
1.3M
1280 x 1024
VGA
640 x 480
3. Press the UP / DOWN button to highlight the desired Resolution option.
4. Press the OK / Shutter button to select and save the highlighted option.
Note: At any time you can press the RESOLUTION button to exit the Resolution menu
and return to the previous screen.

15
Video Capture Mode
The Video Capture Mode allows you to capture videos with your digital video camera.
When the camcorder is first powered on, the Video Capture Mode is active.
Taking a Video
1. While in Video Capture Mode use the LCD display to direct the camcorder at the scene
you would like to capture.
Note: The amount of time remaining to capture your videos is shown on the top right of the
LCD screen. The amount of time available depends on the selected video resolution
and the size of the SD Memory Card installed in your camcorder.
2. To adjust the camcorder display you can use the zoom control lever.
Push the zoom control lever UP to zoom in : T/Zoom In (UP).
Push the zoom control lever DOWN to zoom out: W/Zoom Out (DOWN).
You can magnify your subject up to 4 times using the digital zoom.
The following Digital Zoom Indicator appears on the right side of the LCD screen:
3. Press the Shutter button to start the video capture.
4. A red, blinking icon appears at the top of the LCD indicating that the video capture is in
progress.
The recording time appears on the top right, indicating the elapsed time as you record.
5. To stop the video capture, press the Shutter button again.
6. The video is automatically saved to the camcorder’s SD Memory card.

16
Video Capture Mode Quick Function Buttons
BUTTON
FUNCTION
Shutter/OK
Starts and Stops the Video Capture
Saves your selected menu option
MODE
Opens the Mode menu screen which allows you to select your
camcorder mode. The Mode options include:
Video Capture Mode, DSC (Photo Capture Mode), Playback Mode,
Setup Mode
Exits the Mode menu screen
DELETE
Turns the Infra red Night Vision Lights ON and OFF
VIVILINK
Opens the ViviLink for Videos menu screen which allows you to select
your ViviLink Destination Site. The ViviLink options include:
YouTube, Photobucket, Flickr, None
Exits the ViviLink for Videos menu screen
RESOLUTION
Opens the Resolution menu screen which allows you to select your
Video Resolution (Image Size). The Resolution options include:
VGA (640x480), QVGA (320x240)
Exits the Resolution menu screen
T (UP) /
W (DOWN)
T (UP): Zooms in; highlights selected menu option
W (DOWN): Zooms out; highlights selected menu option

17
Photo Capture Mode
The Photo Capture mode allows you to capture pictures with your digital camcorder.
When you first turn on the camcorder, the camcorder will be in Video Capture mode by default.
To access the Photo Capture Mode:
1. Press the MODE button to open the Mode menu options.
2. Press the UP / DOWN button to highlight DSC.
3. Press the OK / Shutter button to select and enter the DSC Mode.
Taking a Picture
1. While in Photo Capture Mode use the LCD display to direct the camcorder at the scene
you would like to capture.
Note: The number of photos that can be taken appears on the top right of the LCD screen.
After the photo is taken the number is reduced by one. The amount of photos that
can be captured depends on the selected photo resolution and the size of the SD
Memory Card installed in your camcorder.
2. To adjust the camcorder display you can use the zoom control lever.
Push the zoom control lever UP to zoom in : T/Zoom In (UP).
Push the zoom control lever DOWN to zoom out: W/Zoom Out (DOWN).
You can magnify your subject up to 4 times using the digital zoom.
The following Digital Zoom Indicator appears on the right side of the LCD screen:
3. Press the Shutter button to capture your photo.
4. The photo is automatically saved to the camcorder’s SD Memory card.

18
Photo Capture Mode Quick Function Buttons
BUTTON
FUNCTION
Shutter/OK
Captures your photo
Saves your selected menu option
MODE
Opens the Mode menu screen which allows you to select your
camcorder mode. The Mode options include:
Video Capture Mode, DSC (Photo Capture Mode), Playback Mode,
Setup Mode
Exits the Mode menu screen
DELETE
Turns the Infra red Night Vision Lights ON and OFF
VIVILINK
Opens the ViviLink for Photos menu screen which allows you to select
your ViviLink Destination Site. The ViviLink options include:
Facebook, Twitgoo, Twitpic, Photobucket, Flicker, MySpace,
Picasa Albums, None
Exits the ViviLink for Photos menu screen
RESOLUTION
Opens the Resolution menu screen which allows you to select your
Photo Resolution (Image Size). The Resolution options include:
3M (2048x1536), 2M (1920x1080), 1.3M (1080x1024), VGA (640x480)
Exits the Resolution menu screen
T (UP) /
W (DOWN)
T (UP): Zooms in; highlights selected menu option
W (DOWN): Zooms out; highlights selected menu option

19
Playback Mode
The Playback mode allows you to review and delete videos and photos that you’ve already taken
with you camcorder.
When you first turn on the camcorder, the camcorder will be in Video Capture mode by default.
To access the Playback Mode:
1. Press the MODE button to open the Mode menu options.
2. Press the UP / DOWN button to highlight Playback.
3. Press the OK / Shutter button to select and enter the Playback Mode.
Playing Videos on Your Camcorder
1. Select your Video:
Once in Playback mode, press UP / DOWN button to scroll through the images on
your digital video recorder’s memory card until you find the video you would like to
view.
Each captured image (videos and photos) displays on the LCD screen.
Videos appear with an ‘AVI’icon on the top left of the LCD screen.
2. Play your selected video:
Press the Shutter / OK button to start playing the video.
Press the Shutter / OK button again to pause the video and to continue playing and
pausing as needed.
To fully stop the video and restore the icons to the LCD, press the UP / T button.
Note: While the Video is playing on your camcorder, all the icons on the top section of the
LCD disappear.
If you would like to view your videos with sound (the camcorder does not have a
speaker) first transfer the videos to your computer. You can then use the Vivitar
Experience Image Manager application to play the video on your computer. See
‘Getting Photos and Videos from the Camcorder to the Computer’for more details.