Vivitar 78056N User manual

78056N
HD Action Camcorder
User Manual
© 2009-2015 Sakar International, Inc. All rights reserved.
Windows and the Windows logo are registered trademarks of Microsoft Corporation.
All other trademarks are the property of their respective companies.

1
CONTENTS
Introduction .................................................................................................................................. 2
What’s Included............................................................................................................................ 3
Parts of the Camcorder ................................................................................................................ 4
Initial Camcorder Setup................................................................................................................ 5
Main Camcorder Modes............................................................................................................... 9
Camcorder Technical Specifications........................................................................................... 10
Camcorder Mounts and Accessories...........................................................................................11
Powering On Your Camcorder.................................................................................................... 14
Changing Camcorder Mode ....................................................................................................... 14
Navigating the Menus................................................................................................................. 16
Video Capture Mode .................................................................................................................. 17
Photo Capture Mode.................................................................................................................. 21
Playback Mode........................................................................................................................... 25
Menu Options............................................................................................................................. 31
Computer System Requirements ............................................................................................... 44
Installing the Software................................................................................................................ 45
Connecting the Camcorder to the Computer.............................................................................. 46
Getting Photos and Videos from the Camcorder to the Computer ............................................. 47
Getting Started! .......................................................................................................................... 48
Transferring Images Manually from the Camcorder to the Computer......................................... 48
Camcorder Maintenance............................................................................................................ 50
Sakar Warranty Card.................................................................................................................. 51
Technical Support....................................................................................................................... 52
Troubleshooting.......................................................................................................................... 52

2
Introduction
Thank you for purchasing this digital HD Action Camcorder. Everything you need to take quality
digital videos and photos is included with your camcorder.
Vivitar makes capturing those special moments as easy as possible.
Please read this manual carefully first in order to get the most out of your digital camcorder.
NOTE:
Your digital action camcorder supports a Micro SD Memory Card (up to 32GB, Class 4 or
higher).
In order to use your digital action camcorder normally, please insert the Micro SD Memory
card before use.
Micro SD Memory cards are not included and need to be purchased separately.
This camera is a plug and play device. You can download the pictures and videos without
the software by directly accessing the memory card from your computer. We would
however recommend that you install the ‘Vivitar Experience Image Manager’Software to
enjoy the full Vivitar experience.

3
What’s Included
1. Action Camcorder
6. Helmet Mount Strap
2. USB Cable
7. Bicycle Mount
3. Waterproof Casing
8. Helmet Mount
4. Vivitar Experience Installation CD
9. Blaster Mount
5. Stand Accessory
NOTE:
Built-in Lithium Battery included (not shown).
Micro SD Card not included.

4
Parts of the Camcorder
1. Micro SD Memory Card Slot
9. LED Busy Light Indicator
2. Reset Button
10.LED Charge Light Indicator
3. USB Interface
11.UP / Zoom In Button
4. Power Button
12.MENU / OK (SET) / EXIT Button
5. Microphone
13.DOWN / Zoom Out Button
6. SHUTTER / ENTER / BACK Button
14.MODE Selector: Photo, Video, Playback
7. Wrist Strap Connector
15.LCD Screen
8. Lens

5
Initial Camcorder Setup
CHARGING THE BATTERY
1. Power off the camera.
2. Use the supplied USB cable to connect the smaller end of the USB cable into the USB
slot on the camcorder. Connect the other end to the USB interface of your computer.
See images below: 1 and 2.
3. The charge light will turn off when the battery is fully charged.
See images below: 3 and 4.

6
BATTERY INDICATOR
The following icons appear on the camera and indicate the status of the camera’s battery power
level:
Battery Indicator
Description
The battery level is full.
The battery level is half.
The battery level is low, indicating to prepare for
recharging the built-in lithium battery.
If the no battery level icon shows, the battery is almost
exhausted and the camcorder automatically turns off after
a moments.
‘Low Battery’ flashes once the battery level is completely
exhausted and the camcorder automatically turns off after
a few seconds.

7
INSTALLING THE MICRO SD MEMORY CARD
Make sure a Micro SD Memory card Class 4 or higher (up to 32 GB) has been properly inserted
into your camcorder. Micro SD Memory card not included.
To properly insert the Micro SD Memory Card:
1. Power off the camcorder.
2. Insert the Micro SD Card into the Micro SD Card slot in the direction as shown on the
camcorder (see SD icon by the Micro SD card slot).
3. Gently press the Micro SD Card until you hear a slight clicking sound. This indicates the
memory card has been inserted correctly.
4. If the memory card has successfully been inserted an icon appears on the LCD
screen.
5. To remove the card, gently press on the edge of the card to release it and pull the card
out.
6. If the card is inserted or removed while the camcorder's power is on, it may damage the
card and/or any recorded data.Always confirm that the power is off before inserting the
card into the camcorder.
NOTE: Make sure there is room on the Micro SD Memory Card to capture images. If the
memory card is full, additional images cannot be captured and saved to the card.

8
TURNING ON AND USING THE CAMERA
Press the POWER button, located on top of the camcorder, to turn on the camcorder.
NOTE: If the camcorder becomes unresponsive, insert a thin pin into the RESET
hole and gently push the pin until you hear a slight ‘click’ sound. The camcorder will
then reset.

9
Main Camcorder Modes
VIDEO CAPTURE MODE
Use this mode to capture videos with your digital camcorder.
Slide the MODE Switch to the Video Capture icon to open the Video Capture Mode.
To take a video, aim your camcorder as desired and press the SHUTTER button to start
recording. A red record indicator and the elapsed recording time appear on the LCD screen
while the recording is in progress. To stop recording, press the SHUTTER button again.
The video is automatically saved to your camcorder’s memory card.
PHOTO CAPTURE MODE
Use this mode to capture pictures with your camcorder.
Slide the MODE Switch to the Photo Capture icon to open the Photo Capture Mode.
To take a picture, aim your camcorder as desired and press the SHUTTER button.
The picture is automatically saved to your camcorder’s memory card.
PLAYBACK MODE (PHOTOS & VIDEOS)
Use this mode to view and manage the photos and videos on your camcorder.
Slide the MODE Switch to the Playback icon to open the Playback Mode for photos and
videos. You can scroll through the photos and videos that you’ve previously taken to view
or delete them as desired.

10
Camcorder Technical Specifications
Image Sensor
CMOS Sensor
Video Resolution
HD 720P (1280X720)
VGA (640X480)
Photo Resolution
5MP (2592x1944)
1MP (1280x960)
VGA (640x480)
File Format
AVI (Video), JPEG (Photo)
External Memory
Micro SD Memory card, Class 4 or higher, up to 32GB
LCD Display
1.77”TFT
Zoom
4X Digital Zoom
Focus Range
Fixed Focus ; F 3.1, f=9.3mm
White Balance
Auto, Daily, Cloudy, Fluorescent, Tungsten
Light Exposure
±2.0, ±1.7, ±1.3, ±1.0, ±0.7, ±0.3, 0
Metering
Center, Multi, Spot
Language
English, French, Spanish, German, Italian, Portuguese
Auto Power Off
Off, 1 min., 3 min., 5 min.
Interface
USB 2.0
System Requirements
MICROSOFT® Windows XP (SP3), Vista (SP1) or 7
MACINTOSH OSX v10.5.x and above
Battery
Built-in Lithium-ion Battery

11
Camcorder Mounts and Accessories
WATERPROOF CASE
1. Clamp
2. Shutter Release
3. Power Button
1. Insert a finger at the half circle of the clamp by prying the clamp up - away from the case.
2. Before sealing the case, inspect the water sealing gasket to be sure it’s in good condition
and that it is flat and smooth.
You can test the gasket by closing the case without inserting the camcorder. Submerse
the case completely in a bowl of water for about a minute. Remove the case from the
water, dry off its exterior with a towel, and then open the case. If the entire interior is dry,
the case and gasket are safe for use under water.
After putting the device in and closing the waterproof casing cover, carefully check
whether the waterproof ring is deformed due to pressure.
3. There are just two buttons required for recording video and images: the Shutter Button
and the Power Button.
4. Remember to put the Mode Switch in your desired recording position before inserting the
camcorder in the waterproof case. There is no external button for the Mode Switch.

12
INSTALLING THE BICYCLE MOUNT: HANDLEBAR CLAMP
INSTALLING THE HELMET MOUNTING SYSTEM

13
INSTALLING THE BLASTER MOUNT
MOUNTING ADAPTER
1. This Mounting Adapter allows you to attach mounting accessories that have a ¼-20
screw.
2. The camcorder will clip right into this adapter.

14
Powering On Your Camcorder
TURNING POWER ON AND OFF
1. Long press the POWER button to turn on the camcorder.
2. Press the POWER button again to turn the power off.
AUTO POWER OFF –POWER SAVING FEATURE:
Your digital camcorder includes an Auto Power Off power feature that automatically turns off your
camcorder after a specified time that your camcorder is left idle. The specified time can be set
using the ‘Power Save’ menu option. Once the camcorder is automatically powered off, you can
long press the POWER button to power on the camcorder.
Changing Camcorder Mode
THREE MAIN MODES
1. Video Capture Mode - Use this mode to capture videos with your camcorder.
2. Photo Capture Mode - Use this mode to capture photos with your camcorder.
3. Playback Mode (for photos and videos) –Use this mode to view your captured photos
and videos.
NOTE: The icons that appear on the LCD screen are the best default settings so that you can
begin to capture and enjoy clear quality photos and videos.

15
SWITCHING MODES
After turning on the camcorder, you can move the MODE Switch to change between the three
modes in turn:
In Video Capture Mode, press the SHUTTER button to start recording and press it again
to stop.
In Photo Capture Mode, press the SHUTTER button to take photo.
In Playback Mode, press the SHUTTER button to play back your captured Video
When in Video Capture Mode, this icon will display on the top-left corner of the LCD display.
When in Photo Capture Mode, this icon will display on the top-left corner of the LCD display
When in Playback Mode, this icon will display on the top-left corner of the LCD display.

16
Navigating the Menus
PHOTO CAPTURE, VIDEO CAPTURE AND PLAYBACK MENUS
To access the Main Menu for each Mode:
1. Press the OK/MENU button to open the Main Menus for the current mode.
2. Press the DOWN or UP button to select a specific menu.
The selected option appears highlighted.
3. Press the SHUTTER button to select and enter the highlighted option’s submenu.
4. To select a specific option, press the DOWN or UP button and then the OK button to
save the selected setting and return to the previous menu.
NOTE:
To go back from the submenus to the previous menu, press the SHUTTER button.
To exit the Main Menu, press the OK button.
GENERAL CAMCORDER SETTINGS MENUS
To access the General Camcorder Settings Menu:
1. Press the OK/MENU button while in the Photo Capture, Video Capture or Playback Mode.
2. Press the SHUTTER button to select the General Camcorder Settings icon .
Press the DOWN or UP button to select a specific menu.
The selected option appears highlighted.
3. Press the SHUTTER button to select and enter the highlighted option’s submenu.
4. To select a specific option, press the DOWN or UP button and then the OK button to
save the selected setting and return to the previous menu.
NOTE:
To go back from the submenus to the previous menu, press the SHUTTER button.
To exit the Main Menu at any time and return to the previous screen, press the OK button.
Once you change a setting, the setting is saved by your camera until you manually change the
setting or restore the camera’s default factory settings.
After selecting your desired setting, some settings are displayed as an icon on the LCD
screen in Capture Mode.

17
Video Capture Mode
The Video Capture Mode allows you to capture videos with your digital camcorder.
To enter Playback Mode, slide the MODE Switch to the middle, to the Video Capture icon.
The Video Capture icon appears on the LCD screen.
TAKING A VIDEO
1. Selecting the Scene with the LCD Display:
While in Video Capture Mode use the LCD display to direct the camcorder at the scene
you would like to capture.
NOTE: The time available for video capture (as per the installed memory card size and
selected resolution) is shown on the top right of the LCD screen.
2. Zoom Options:
Press the UP / ZOOM IN button or DOWN /ZOOM OUT button to better set the
camcorder display if desired.
NOTE: While using the Zoom options, the zoom magnification is indicated on the right
side of the LCD screen.
3. Changing Resolution:
If you would like to change the resolution, press the OK (MENU/SET) button and then
press the DOWN button to select ‘Movie Size’. Next, press the SHUTTER button to
enter and view the Movie Size options. Press the UP button or DOWN button to
select an option and then press the OK button to confirm the option.
The Movie Size options include:
HD 1280x720
640 640x480
4. Capturing the Video:
START: Press the SHUTTER button to start the video capture.
The camcorder’s LED busy light turns on, the elapsed time appears on the top right
corner of the LCD screen and a red record icon appears indicating the recording is in
progress.

18
STOP: To stop the video recording, press the SHUTTER button again.
5. The video is automatically saved to the camcorder’s Micro SD card.
NOTE:
When using the Waterproof Case, make sure to set the zoom and camcorder settings before
placing it into the case.
VIDEO CAPTURE MODE BUTTONS
Button
Description
SHUTTER /
ENTER / BACK
START/STOP: Starts and stops the video capture.
ENTERS/EXITS MENU: Enters selected Menu. Exits the submenu.
OK / SET / MENU
MENU: Opens and exits the Main Menu options for Video Capture Mode
and General Camera Settings.
SAVE SETTING: Saves the selected setting and returns to Main Menu.
NOTE: Use the UP/DOWN/SHUTTER buttons to navigate.
MODE
SELECTOR
SWITCH
Slide up or down to change between the Video Capture Mode, Photo
Capture Mode and Playback Mode.
UP
ZOOM: Zooms IN
NAVIGATES MENU: Navigates within the Menus.
DOWN
ZOOM: Zooms OUT
NAVIGATES MENU: Navigates within the Menus.

19
VIDEO CAPTURE MODE LCD ICON STATUS DESCRIPTION
The following icons appear on the LCD screen and indicate the selected menu options and
camera status.
Item
Function
Description
1
Mode Selection
Displays the current selected Mode:
Video Capture Mode
2
White Balance
Displays the icon of the selected White Balance
setting.
The White Balance options include:
AUTO, Daylight, Cloudy,
Florescent, Tungsten
3
Metering
Displays the icon of the selected Metering Setting.
The Metering options include:
Center, Multi, Spot