Vivitar DVR 610 User manual

DVR 610 Digital Camcorder
with Camera
User Manual
© 2009-2011 Sakar International, Inc. All rights reserved.
Windows and the Windows logo are registered trademarks of Microsoft Corporation.
All other trademarks are the property of their respective companies.

1
Table of Contents
Introduction .................................................................................................................................. 2
What‟s Included............................................................................................................................ 2
Parts of the Camera..................................................................................................................... 3
Initial Camera Setup..................................................................................................................... 4
Main Camera Modes.................................................................................................................... 7
Camera Technical Specifications.................................................................................................. 8
Computer System Requirements –WINDOWS OS..................................................................... 9
Computer System Requirements –MAC OS ............................................................................... 9
Powering ON/OFF Your Digital Camcorder................................................................................ 10
Changing Camera Mode ............................................................................................................ 10
Navigating the Menus..................................................................................................................11
Video Capture Mode .................................................................................................................. 12
Video Playback Mode................................................................................................................. 20
Photo Capture Mode.................................................................................................................. 24
Photo Playback Mode ................................................................................................................ 37
Connecting the Camera to a TV................................................................................................. 42
Connecting the Camera to a Headset........................................................................................ 42
Installing the Software................................................................................................................ 43
Connecting the Camera to the Computer................................................................................... 44
Getting Photos and Videos from your Camera to Your Computer.............................................. 45
Get started!................................................................................................................................. 46
Transfer media from my camera to my computer manually (Using Windows)............................ 46
Transfer media from my camera to my computer manually (Using Macintosh).......................... 47
Camera Maintenance................................................................................................................. 47
Sakar Warranty Card.................................................................................................................. 48
Technical Support....................................................................................................................... 49
Troubleshooting.......................................................................................................................... 49

2
Introduction
Thank you for purchasing this camera. Everything you need to take quality digital Videos and
Photos is included with your camera.
Vivitar makes capturing those special moments as easy as possible.
Please read this manual carefully first in order to get the most out of your digital camcorder.
Note: Your digital camcorder requires an SD Memory card (up to 16GB) for normal use.
SD Memory cards are not included and need to be purchased separately.
What‟s Included
1. Digital Camcorder
2. TV Cable
3. Vivitar Experience Image Manager
software Installation CD
4. Wrist Strap
5. Built-in USB Connector
Note: SD Memory Card and batteries not included.

3
Parts of the Camera
1.
Power Button
11.
Battery Compartment
2.
Shutter Button
12.
SD Memory Card Slot
3.
Left / Zoom Out/ Thumbnail View
13.
USB Connector
4.
Right / Zoom In
14.
USB Lever
5.
M (Mode) Button
15.
AV Out Port
6.
SET Button
16.
Wrist Strap Connector
7.
UP / Previous Image / Scene Selection Button
17.
Speaker
8.
Down / Next Image / Delete Last Image Button
18.
Microphone
9.
LCD Flip Screen
19.
Tripod Socket
10.
Digital Lens

4
Initial Camera Setup
Installing the Batteries
Installing the Memory Card
Slide open the battery cover and install 2 AA
alkaline batteries with the correct polarity
(as illustrated inside the battery
compartment) into the battery compartment
on the back of the camera.
SD Memory card (up to 16GB) needed for
normal use.
Turning On the Camera
Using the Camera

5
When powering the digital camcorder ON for the first time, the camera takes you through the
INITIAL CAMERA SETUP.
Powering the Camera ON
1. Batteries
Make sure the batteries have been inserted properly into your digital camcorder.
Slide the battery cover on the back of the camera in a downward direction to open the
cover.
Insert 2 x AA (1.5v) batteries (not included) with the correct polarity, according to the
polarity illustrated inside the battery compartment.
Note: Alkaline batteries are recommended.
2. SD Memory Card
Make sure an SD card has been properly inserted into your camera. (SD card not
included.)
To properly insert the SD Card:
Push the SD card into the slot in the direction shown on the camera (see SD icon by the
SD card slot). Push the SD card until you hear a slight clicking sound. This indicates the
SD card has been inserted correctly.
Note:
After the camera is powered on, an SD icon will appear on the LCD display. If you do
not see the SD icon on the display, please check if the card was inserted properly.
Make sure the SD card is not locked (check the lock switch on the side of the SD card). If
the SD card is locked this will prevent the camera from saving captured photos to the SD
card.
3. Power On
Press the POWER button, on the top of the camera, to turn on the camera.

6
Setting the Camera Language
1. You will be prompted to select a language for the camera.
The Language selection menu will appear.
2. Select the language of your choice by pressing the UP or DOWN direction control
buttons.
3. Press the SET button to confirm the selection.
After selecting a language, the digital camcorder opens with the Video Capture mode ready for
you to capture your videos.

7
Main Camera Modes
Your camera has different modes for the various camera functions.
You can switch modes by pressing the MODE (M) button on your camera after the camera has
been powered ON.
Video Capture Mode
Use this mode to capture videos with your digital camcorder.
This is the default mode when the camera is powered ON.
To take a video, aim your camera as desired and press the Shutter button to start the
record. A blinking record indicator will appear on the LCD screen while record is in
progress. To stop the record, press the Shutter button again. The video will be
automatically saved to your camera‟s memory card.
To access the various menus for the Video Capture mode, press the SET button while in
the Video Capture mode.
Photo Capture Mode
Use this mode to capture pictures with your camera.
After turning on your camera, press the MODE (M) button once to open the Photo Capture
mode.
To take a picture, aim your camera as desired and press the Shutter button.
The picture will be automatically saved to your camera‟s memory card.
To access the various menus for the Photo Capture mode, press the SET button while in
the Photo Capture mode.
Playback Mode (Photos & Videos)
Use this mode to view and manage the photos and videos on your camera.
After turning on your camera, press the MODE (M) button twice to open the Playback mode
for photos and videos. You can scroll through the photos and videos that you‟ve previously
taken to view, edit or delete them as desired.
To access the various menus for the Playback mode for photos and videos, press the SET
button while in the Playback mode.

8
Camera Technical Specifications
Product type
Digital Camcorder
Digital Video Resolution
640*480 pixels (30fps) / 320*240 pixels(30fps )
Digital Photo Resolution
2M (1600x1200), 1.3M (1280x1024), VGA (640x480)
Image Sensor
CMOS Sensor
LCD Display
1.8 Inch TFT
Internal Memory
Limited for test images (3 seconds for video or 2 photos)
External Memory
SD card (up to 16GB) needs to be inserted to use the camera
Zoom
2 x Digital Zoom
Frequency
50Hz / 60 Hz
Scene
Auto / Scenery / Portrait / Night Scenery / Night Portrait / High
Sensitivity / Sport / Beach / Party
Self Timer
2 seconds / 5 seconds / 10 seconds / Off
Anti-Shake
Yes
White Balance
Auto / Daylight / Cloudy / Fluorescent / Incandescent
Multi SnapShots
Yes
Exposure
-3.0EV ~ +3.0EV
ISO
Auto / 100 / 200 / 400
Slide Show
3 seconds / 5 seconds / 10 seconds
Language
English, French ,Spanish, Portuguese, German, Dutch, Italian
Speaker
Built-in
File Format
AVI and JPEG
TV out / Headset
PAL / NTSC / Headset
Power Saving
1 minute / 3 minutes / 5 minutes / Disable
Battery
2 AA batteries (1.5V)
Transmission interface
USB 1.1
Working temperature
-20~45C
Computer System
Requirements
Window XP SP3 / Vista SP1/ Windows 7
Mac OS X v10.5.x or higher

9
Computer System Requirements –WINDOWS OS
To be able to download photos and videos to your PC, you will need the following minimum
configuration:
Microsoft®Windows XP with Service Pack3,Windows Vista with ServicePack 1 orWindows 7
Pentium® 4 processor (or above)
512 MB of RAM, with 250 MB of free hard disk space
16-bit Color monitor, 1024 X 768 recommended screen resolution
CD-ROM Drive
QuickTime® 6 or higher
Microsoft® Internet Explorer 7 or higher
Windows Media Player 10 or higher
DirectX 9 or higher
Internet connection required
Computer System Requirements –MAC OS
To be able to download photos and videos to your Macintosh, you will need the following
minimum configuration:
Intel processor running Mac OS X v10.5.x or later
256 MB RAM, 250 MB free hard disk space
Display: 1024 x 768 or higher-resolution monitor
QuickTime® 6 or higher
Internet connection required

10
Powering ON/OFF Your Digital Camcorder
Make sure the batteries have been inserted properly into your digital camcorder.
Make sure an SD card has been inserted into your camera.
(SD card up to 16 MB - SD Card not included)
Powering the Digital camcorder ON
Press the Power button to turn your camera ON.
The camera will be in Video Capture mode to start.
Powering the Digital camcorder OFF
While the camera is on, you can press the Power button again at any point to turn your
camera OFF. You will see a “Goodbye” splash screen and then the camera will power off
completely.
Note: Your digital camcorder also has an Auto Power Off feature that automatically turns off
your camera after a specific period of time that your camera is left idle. The Auto Power Off
settings can be set from the Auto Power Off setting in the Video Capture Mode or Photo Capture
Mode menu.
Changing Camera Mode
Your camera has three main modes:
1. Video Capture Mode - Use this mode to capture videos with your digital camcorder
2. Photo Capture Mode - Use this mode to capture photos with your digital camcorder.
3. Playback Mode (for photos and videos) - Use this mode to view the videos and photos
you have already taken with your camera.
When the camera is first powered ON, the Video Capture Mode is active. The icons that appear
on the LCD screen are the best default settings so that you can begin to capture and enjoy clear
quality videos and photos.

11
To change the active camera mode, make sure the camera is powered ON and press the MODE
(M) button.
When in Video Capture Mode, this icon will display on the top-left corner of the LCD display
When in Photo Capture Mode, this icon will display on the top-left corner of the LCD display
When in Playback Mode, this icon will display on the top-left corner of the LCD display
Navigating the Menus
Each camera mode has a set of menus specific to that mode.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll between the various menus
for the current mode.
3. Press the UP or DOWN direction control buttons to highlight the desired menu option.
4. Press the SET button to select and save the highlighted menu option.
5. If the selection can be remembered by the camera, a selection icon appears to the
right of the selected menu option. Changes made to these options remain until you
change them again at a later time.
6. Some menu options are single-use functions that are not remembered by the camera and
do not display the selection icon when selected.
7. At any time you can press the MODE (M) button to exit the menus and return to the
previous screen.

12
Video Capture Mode
The Video Capture Mode allows you to capture videos with your digital camcorder. When the
camera is first powered ON, the camera will be in Video Capture Mode.
Taking a Video
1. While in Video Capture Mode use the LCD display to direct the camera at the scene you
would like to capture.
2. Click the Right - T/Zoom In and Left - W/Zoom Out buttons to better set the camera
display if desired.
3. Press the Shutter button to START the video capture.
4. The elapsed time appears on the top right corner of the LCD screen.
A blinking red record indicator appears on the LCD screen while record is in progress.
5. To STOP the video record, press the Shutter button again.
6. The video will automatically be saved to the camera‟s memory or SD card.
7. You can also capture your videos using the Flip Screen.
When you would like to quickly and easily include yourself in the video, simply flip the
LCD display out and hold the camera facing towards you. Make sure you can see yourself
within the scene on the LCD screen, look at the lens, then click the Shutter button to
begin recording.
It‟s as easy as twist and shoot!
Note: The amount of recording time available for the resolution selected appears on the top
center of LCD screen. The lower the resolution setting the more recording time is available.
However, videos recorded at lower resolution are of less quality than videos recorded at the
higher resolution.
Remember, the amount of time that you can capture videos also depends on the size of the SD
memory card inserted as well as the video resolution selected.

13
Video Capture Mode Button Functionality
Your digital camcorder has a four-directional pad that functions as Quick Function buttons.
Quick Function Buttons
Action
Left
Zooms Out
Up
Scene Selection –Opens the Scene menu
Right
Zooms In
Down
Delete –Allows you to delete the last video captured
Other
Shutter
Starts and stops the video recording
SET/OK
Opens the Menu options for Video Capture Mode
Saves your selected menu option
Note: To navigate through the Menus, use the Left, Up,
Right, and Down directions control buttons.
MODE (M)
Toggles between the Video Capture Mode, Photo
Capture Mode, and Playback Mode
Exits the Menu options screen

14
Video Capture Mode Menus
The following are the settings that appear in your camera‟s Video Capture Mode:
Scene Menu
The Scene Menu allows you to choose scene settings that let your camera adapt properly to your
current environment.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the Scene menu.
3. Press the UP or DOWN direction control buttons to scroll through the menu options.
4. Press the SET button to select and save the desired option.
5. A selected option icon will appear on the selected item.
6. Press the LEFT or RIGHT direction control buttons to select the next menu item.
7. Press the MODE (M) button to exit the menu and return to your previous mode.
8. An icon reflecting your selection will display on the LCD screen.
9. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.

15
Image Resolution Menu
The Image Resolution menu allows you to choose the desired size of the images taken by your
camera. The Image Resolution Options include:
VGA (640x480)
QVGA (320x240)
Keep in mind that images with a larger size will also take up more of your camera‟s memory.
Videos captured in VGA are of a better quality than QVGA videos and therefore take up more
memory.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the Image
Resolution menu.
3. Press the UP or DOWN direction control buttons to scroll through the menu options.
4. Press the SET button to select and save the desired option.
5. A selected option icon will appear on the selected item.
6. Press the LEFT or RIGHT direction control buttons to select the next menu item.
7. Press the MODE (M) button to exit the menu and return to your previous mode.
8. An icon reflecting your selection will display on the LCD screen.
9. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
White Balance Menu
The White Balance feature allows your camcorder to adjust the coloring of the captured images
depending on the type of light source in the current environment.
Properly adjusting the White Balance setting to match your current environment will allow the
camera to properly balance the colors in the images that are taken with your camera.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the White Balance
menu.
3. Press the UP or DOWN direction control buttons to scroll through the menu options.
4. Press the SET button to select and save the desired option.

16
5. A selected option icon will appear on the selected item.
6. Press the LEFT or RIGHT direction control buttons to select the next menu item.
7. Press the MODE (M) button to exit the menu and return to your previous mode.
8. An icon reflecting your selection will display on the LCD screen.
9. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
Light Exposure Menu
The Light Exposure setting helps you control the amount of light that enters your camera‟s lens.
This setting should be adjusted when the environment is lighter or darker than normal.
When the environment has more light than is needed, reduce the exposure setting (by using the
negative - count) to reduce the amount of light allowed into the lens by your camera.
If the environment has less light (darker) than is needed, increase the exposure setting (by using
the positive + count) to increase the amount of light allowed into the lens by your camera.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the Light Exposure
menu.
3. Press the UP or DOWN direction control buttons to scroll through the menu options.
4. Press the SET button to select and save the desired option.
5. A selected option icon will appear on the selected item.
6. Press the LEFT or RIGHT direction control buttons to select the next menu item.
7. Press the MODE (M) button to exit the menu and return to your previous mode.
8. An icon reflecting your selection will display on the LCD screen.
9. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.

17
Language Menu
You can select your camera‟s language setting by selecting the desired language from the
Language menu.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the Language
menu.
3. Press the UP or DOWN direction control buttons to scroll through the menu options.
4. Press the SET button to select and save the desired option.
5. A selected option icon will appear on the selected item.
6. Press the LEFT or RIGHT direction control buttons to select the next menu item.
7. Press the MODE (M) button to exit the menu and return to your previous mode.
8. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
Auto Power Off Menu
You can use the Auto Power Off feature in order to conserve you camera‟s battery life. The
designated time represents when your camera will automatically power off.
When the camera sits idle for the designated period of time, the camera will shut off completely
and will need to be turned on again with the power button before the next use.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the Auto Power Off
menu.
3. Press the UP or DOWN direction control buttons to scroll through the menu options.
4. Press the SET button to select and save the desired option.
5. A selected option icon will appear on the selected item.
6. Press the LEFT or RIGHT direction control buttons to select the next menu item.
7. Press the MODE (M) button to exit the menu and return to your previous mode.
8. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.

18
Frequency Menu
The options in the Frequency menu represent the frequency of the electrical current in
fluorescent lighting sources in your locale. If your camera is set to a frequency that does not
match your country‟s electric current, you may see flickering or waves on the images taken by
your camera.
50Hz –UK, Europe and Australia
60Hz –US, Canada and South America
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the Frequency
menu.
3. Press the UP or DOWN direction control buttons to scroll through the menu options.
4. Press the SET button to select and save the desired option.
5. A selected option icon will appear on the selected item.
6. Press the LEFT or RIGHT direction control buttons to select the next menu item.
7. Press the MODE (M) button to exit the menu and return to your previous mode.
8. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
Format Memory Card Menu
You can use the Format Memory Card menu to delete all of the content that is currently on your
camera‟s memory card.
Keep in mind that formatting the memory card will permanently delete all of the content on
your camera‟s memory card.
This option can only delete all of the content at one time. If you would like to delete individual
images, use the delete menu in the camera‟s Playback mode.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the Format
Memory Card menu.
3. Press the UP or DOWN direction control buttons to highlight the menu options.
4. To exit without formatting the card, select „Cancel‟ and press the SET button

19
5. To proceed with the format, select “Yes” and press the SET button.
The memory card will be then be automatically completely formatted.
Note: Formatting your memory card permanently deletes all images.
6. Press the MODE (M) button to exit the menu and return to your previous mode.
Firmware (Factory Default Settings) Menu
Use this menu to view the Firmware version on your camera or to reset your camcorder settings
to the Factory Default Settings.
1. Press the SET button to open the menus for the current mode.
2. Press the LEFT or RIGHT direction control buttons to scroll and select the Firmware
(Factory Default Setting) menu.
3. To reset the digital camcorder‟s settings to the Factory Default Settings, press the SET
button to select „Default Setting‟.
To proceed with the reset, select „Yes‟ and press the SET button to confirm.
The settings will be reset.
You will automatically exit the menu and return to the previous mode with the digital
camcorder‟s settings set to the Factory Default Settings.
To exit the resetting to the default settings, select „No‟ and press the SET button.
You will automatically exit the menu and return to the previous mode.
Note: After RESETTING to the default settings, it is recommended to select your system
language using the Video/Photo Capture Mode Menu. If you do not, the next time the digital
camcorder is powered on, you will be prompted to select a system language.