1. READ ALL INSTRUCTIONS BEFORE USING YOUR HEADPHONES.
2. Do not use your headphones near water. Do not place your headphones
on any wet surfaces.
3. Do not allow children to use the headphones without adult supervision.
4. Do not expose your headphones to excessive heat, flames or fire.
5. Always press all buttons carefully.
6. Do not use in extremely dry environments, as this can lead to static
discharge during usage.
7. Do not expose your headphones to temperatures above 104°/ 40°C. Keep
out of direct sunlight.
8. Do not attempt to repair this product yourself. Contact a qualified service
center if your headphones are in need of service.
9. Do not drop, puncture or expose your headphones to excessive trauma.
10. Your headphones are not intended for commercial use.
11. Use only the supplied charging cable. Unplug this device when not in use
for long periods of time.
12. Use a soft cloth to clean your headphones. Never use any harsh
chemicals or detergents.
13. Please recycle or dispose of your headphones properly based on the
laws and rules of your municipality. Contact local recycling facilities and/or
the manufacturer of your headphones for further information.
This warranty covers the original consumer purchaser only and is not transferable.
This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to
defects in material or workmanship. Your product will be repaired or replaced at no charge for
parts or labor for a period of one year.
What Is Not Covered by Warranty
Damages or malfunctions not resulting from defects in material or workmanship and damages or
malfunctions from other than normal use, including but limited to, repair by unauthorized parties,
tampering, modification or accident.
To Obtain Warranty Service and Troubleshooting Information:
Call 1-800-592-9541 ior visit our website at www.vivitar.com.
To receive Warranty service along with the name and address of an authorized product service
center, the original consumer purchaser must contact us for problem determination and service
procedures. Proof of purchase in the form of a bill of sale or receipted invoice, evidencing that the
product is within the applicable Warranty period(s), MUST be presented in order to obtain the
requested service. It is your responsibility to properly package and send any defective products
along with a dated copy of proof of purchase, a written explanation of the problem, and a valid
return address to the authorized service center at your expense. Do not include any other items or
accessories with the defective product. Any products received by the authorized service center
that are not covered by warranty will be returned unrepaired.
Important Safety Precautions
Other Controls
Vivitar One Year Warranty
FCC Statement
Press the mode button to change the
headphones mode to Bluetooth or FM
Radio.
In FM mode, press the volume buttons to
change channels. Press and hold the
buttons to adjust the headphone’s
volume.
Insert an auxiliary cable (not included)
directly to the aux port on your
headphones to go directly to AUX mode,
where you can listen to music from an
attached audio device.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
M
©2021 Sakar International
195 Carter Drive
Edison, NJ 08817
Support: 800 592 9541
www.vivitar.com
