Vivitek Qumi Q7 Manual

Qumi Q7 Dongle setup with Macbook or Notebook
1. Insert the Dongle in the USB port of the projector
2. On the projector you go to the Media suite - WIFI
Media Suite
Network Settings
For mirroring your laptop you will have to select WIFI HOTSPOT and enable this option

3. Return to the media suit and select Wifi Display
Next you will see below picture
4. Install and start the application on your NB or PC(Windows & MAC)
Please install the application from attached CD (mirrorOP)
Or download it from www.vivitek.eu
After installing the application, you will see the MirropOP-Lite icon on your
Desktop
1) Connect the Wifi Network settings of your Notebook or Macbook to the Qumi
Wifi, the common name of the Qumi Wifi SSID is Qumi7
2) Double click the MirrorOP icon to execute MirrorOP-Lite client
3) The program will start to list all available Access Point List.(Auto WiFi connect
enabled)
4) Program start to search QUMI with WiFi dongle.
5) After QUMI with WiFi dongle is found, click it to start projection.
Once you have set the Wifi connection of your laptop to the Qumi SSID you cannot
connect with your laptop to the internet anymore

In the media suite of the projector you go to Wifi
Here you select Wifi and enable this option.
Please make sure that the Wifi hotspot mode is disabled.
After you selected the correct access point press enter and return to the Media suite
In the media suite you select the Web browser and you are able to surf the internet