Vivitek Q3PLUS User manual

The user manual of the HD Pocket Projector
Product name:HD Pocket Projector
Trade: VIVITEK
Mode: Q3PLUS
FCC ID: H79Q3PLUS
User Manual

ii
Foreword
Copyright
©2015 Vivitek is a trademark of Delta Electronics, Inc. All other trademarks
are the property of their respective owners. All values, weights and sizes in this Manual are
approximate values. Specifications are subject to change without notice.
Disclaimer
The information in this Manual is subject to change without notice. The Manufacturer disclaims
all expressions and warranties with regard to any information contained herein, in particular to
the implied warranties of merchantability and fitness for a particular purpose. The Manufacturer
reserves the right to modify or change this Manual and any information contained herein
without prior notice.
Trademark
HDMI, HDMI and High-Definition Multimedia Interface are the
trademarks or registered trademarks of HDMI Licensing LLC in the
U.S. and other countries (regions).

iii
Important Safety Information
Important:
It is strongly recommended to read this part before usage of Qumi. These safety and usage
instructions will ensure a safe usage of Qumi for several years. Please keep this Manual
properly for future reference.
Symbols
A warning symbol, either on the machine or in this Manual, denotes a hazard.
The following symbols are used to call attention to important information.
Note:
Indicate additional information besides the topic.
Important:
Indicate additional information that shouldn't be ignored.
Caution:
Indicate the situation which may result in damage to the machine.
Warning:
Indicate the situation which may result in machine damage, environmental hazard or personal
injury.
In this Manual, components and items in the OSD (on screen display) menu are in bold. For
example:
“Press the menu button on the remote controller to open the main menu”. ”
General Safety Information
yDo not open the casing. There are no user-maintainable parts inside the machine. For any
maintenance, please contact a qualified service technician.
yFollow all warnings and precautions on the machine or in this Manual.
yAccording to its design, the projection light source is extremely bright. To avoid harm to
eyes, do not look straight at the lens when the LED is ON.
yDo not place the machine on unstable surface or rack.
yDo not use the system near water or thermal equipment, and avoid direct sunlight.
yDo not place any heavy objects (e.g., books or bags) on the machine.

iv
Installation Precautions
yLeave at least 500mm surround the air outlet.
yEnsure that the air inlet will not take any hot gas from the air outlet.
yWhen Qumi is used in a confined space, ensure that the ambient temperature will not
exceed the working temperature of Qumi and the air inlet and outlet are unclogged.
yEvery confined space should pass through professional thermal evaluation to avoid
circulation during Qumi exhaust. Otherwise, even when the confined space temperature is
within the acceptable working temperature range, the machine may also shut down.
Caution:
Avoid usage of Qumi in dusty environment.

v
Power supply safety
yOnly use supplied adapter.
yDo not place any objects on the power supply cables. Place the power supply cables at
proper places to avoid tread.
yIf the machine is stored or out of service for a long time, please get the battery out of the
remote controller.
Qumi Cleaning
yBefore cleaning, disconnect the power supply cables. See “Qumi Cleaning” in Page 39.
Note:
After usage, Qumi will become a bit hot. Cool Qumi down before putting it into the cabinet.
Control warning
Before installation and usage, please read the control precautions in “Control Compliance”in
Page 47.
Symbol description
Abandon: Do not dispose old electrical and electric equipment through domestic or
municipal garbage collection system. As EU countries required, special recycle
system shall be used.
Main characteristics
yLight-weight, easy for package and transportation.
yHigh luminance, capable of display at sunlight or bright room.
ySupport of 16.70 million colors of UXGA data resolution, delivery of clear and bright
images.
yFlexible installation, support of several projection methods including front projection, rear
projection, ceiling and rear ceiling.
yUpright sight projection. In angle projection, advanced trapezoid can be used for
correction.
yAuto detection of input sources.
About this Manual
This Manual provides Qumi installation and usage instructions for the final users. If possible,
related information (e.g., sketch maps and illustrations) shall be in one page. This
printer-friendly method not only facilitates reading, but also saves papers and protects the
environment. It is suggested to print related chapters as needed.

vi
Table of Contents
Foreword ..................................................................................................................................................ii
Chapter 1 Views..........................................................................................................................................1
Views .......................................................................................................................................................1
Standard accessories:................................................................................................................................3
Remote controller.....................................................................................................................................4
Set remote controller ................................................................................................................................5
Chapter 2 Start to Use................................................................................................................................6
What you need..........................................................................................................................................6
Set Qumi ..................................................................................................................................................7
Happy cast- Android operation.............................................................................................................12
Happy cast-iOS operation.....................................................................................................................14
Chapter 3 Qumi User Interface...............................................................................................................16
Views .....................................................................................................................................................16
Photo......................................................................................................................................................17
Video......................................................................................................................................................18
Music .....................................................................................................................................................19
Files .......................................................................................................................................................20
APP Store ..............................................................................................................................................21
Browser..................................................................................................................................................22
Application program..............................................................................................................................23
WiFi.......................................................................................................................................................24
Setting....................................................................................................................................................25
Chapter 4 OSD Setting.............................................................................................................................26
OSD menu control..................................................................................................................................26
OSD menu overview ..............................................................................................................................27
Setting OSD menu language ..................................................................................................................28
Chapter 5 Qumi Maintenance.................................................................................................................38
Qumi Cleaning .......................................................................................................................................38
Cleaning lens..........................................................................................................................................38
Troubleshooting .....................................................................................................................................39
Specification...........................................................................................................................................42
Vivitek support website..........................................................................................................................43
Projection distance and size ...................................................................................................................44
Projection distance and size specification ..............................................................................................44
List of compatible signal ........................................................................................................................45
Qumi size ...............................................................................................................................................46
Regulatory compliance...........................................................................................................................47
Safety certificate.....................................................................................................................................47
Waste and recycle ..................................................................................................................................47
List of name and content of toxic and hazardous substances or elements in the Product.............48

1
Chapter 1 Views
Views
Front/Top/Right view

2
Rear/Top/Left view
Bottom view

Sta
n
Q
F
k
n
dard ac
c
Q
umi access
o
F
or any item
k
eep original
c
essories:
o
ries include
:
missing, ap
p
packaging
m
:
Rem
o
Powe
r
Docu
m
Stan
d
p
earance dam
m
aterials pro
p
3
o
te controller
r supply cab
l
m
ent kit (Us
e
d
ard HDMI c
a
m
age or mach
i
p
erly for repa
i
(with a 3VC
R
l
e and adapte
r
e
r Manual, Q
a
bles
i
ne failure, p
l
i
ring purpos
e
R
2025 batte
r
r
(based on r
e
u
ick Start,
W
ease contact
e
.
r
y)
e
gions)
W
arranty Car
d
your dealer.
d
)
P
lease

4
Remote controller

5
Set remote controller
The remote controller has one (1) 3V lithium battery (CR2025).
The battery is preassembled in the remote controller.
Before usage of the remote controller, get the plastic sheet (A) out
of the battery compartment.
Change remote controller battery
1.Get the groove stuck and
rotate (A) in the arrow
direction, and open the
battery compartment cover
(B).
2.Take out the old battery and
install a new one (positive
upwards).
3.Rotate and install the cover
in the arrow direction.
Caution:
1. Only use 3V lithium battery (CR2025).
2. Dispose the old battery in accordance with local regulations.
3. If Qumi is out of service for a long time, take out the battery.
Working scope
The remote controller controls Qumi through infrared transmission, rather than direct control.
The working radius of the remote controller is about 7m (23 inches) and the working angle is
15° higher or lower than Qumi (However, the remote controller cannot be vertical to the side or
back of Qumi).
If Qumi fails to respond to the remote controller's commands, move the controller closer to
Qumi.

6
Chapter 2 Start to Use
What you need
Qumi can be connected to several types of external and peripheral equipment. To play music,
connect Qumi to an external or portable music player. To play films, connect Qumi to DVD,
VCD or VHS player. To play video and display photos, connect Qumi to video camera and
digital camera. To display files and other types of media, connect Qumi to peripherals like
computer and USB drive.
Those devices can be connected to Qumi through corresponding cables. Ensure that all
connected devices have appropriate output interfaces.

7
Set Qumi
Connect peripherals through HDMIconnection Connect the HDMI compatible
peripherals to Qumi through cables (optical).
Use

8
Connect a USB drive
Connect a storage device (like a USD drive) to corresponding port for connection to Qumi.
Audio output/AV
Connect a headset or a mini loudspeaker to the audio output jack for connection to Qumi.

9
Charge battery
After outage, charge the projector in the steps below:
Connect the AC adapter to Qumi.
Connect the other end of AC adapter to a wall outlet.
During charging, at the receiver of remote controller, the blue light will be on. After full charge,
the blue light will be off.
Note:
The battery will be fully charged after 3-4h.

10
Power on/off Qumi
1.Connect the AC adapter to Qumi.
Connect the other end of AC adapter to a
wall outlet.
Note:
The adapter models may differ over
region.
2.Press power button to power on
Qumi.
When AC is connected, hold 1 second.
When AC is not connected, hold 5
seconds.
Qumi displays startup screen and detects
all connected devices.

3.
4.
5.
If several in
p
(signal sour
c
appropriate
d
yHDMI:
H
yUSB1:
U
yUSB2:
U
Press
p
When “Po
w
message ap
p
is powered
o
p
ut devices
a
c
e) button o
n
d
evice throu
g
H
DMI/DVI
U
SB disc
U
SB disc
p
ower button
w
er off? Plea
s
p
ears, press
o
ff.
a
re connected
n
the remote
g
h ▲or ▼b
u
to power of
f
s
e press the
p
power
b
11
d
, press the S
O
controller a
n
u
tton.
f
Qumi.
p
ower butto
n
b
utton. The
p
O
URCE
n
d select
n
again”
p
rojector
P
o
P
l
a
g
o
wer off?
ease press t
h
g
ain
h
e power b
u
u
tton

12
Happy cast- Android operation
Screen mirror -Android
Operation I:
Turn on Happycast and scan the two-dimensional code with an Android phone to download and
install the Mobile Version Happycast;
Turn on the Projector Setting - General - More - Portable Hotspot - Portable WLAN Hotspot;
Conform the portable WLAN hotspot with a tick √.
After the mobile phone is connected to the projector WiFi, turn on the mobile Happycast screen,
and click device matched to the projector name (as shown below)
for screen mirror operation.
Note:
The mobile phone and the projector are not connected to any third-party WiFi.

13
Operation II:
Ensure that the mobile phone and the projector are under a same WiFi environment;
Turn on Happycast and scan the two-dimensional code with an Android phone to download and
install the Mobile Version Happycast;
Turn on the mobile Happycast screen, and click device matched to the projector name (as
shown below) for screen mirror operation.
Note:
Ensure that the mobile phone and the projector are under a same WiFi environment

14
Happy cast-iOS operation
Screen mirror -iOS
Operation I:
Turn on the Projector Setting - General - More - Portable Hotspot - Portable WLAN Hotspot;
Conform the portable WLAN hotspot with a tick √.
Turn on the projector Happycast; ensure that the mobile phone is connected to the projector
WiFi, slide up from the bottom of mobile phone screen to appear the console interface. Click
Airplay button to select the device to be projected. Turn on the mirror image switch (as shown
below) for screen mirror operation.
Note:
The mobile phone and the projector are not connected to any third-party WiFi.