2
ASSEMBLY STEPS
STEP 1
Assemble Vertical Brackets (A) to the VESA brackets from with your existing TV mount using
M6x12mm Screws (S-A), M6 Washers (S-B), and M6 Nuts (S-C). Tighten using 4mm Allen
Wrench (T-A) and M6 Wrench (T-B).
PACKAGE CONTENTS
WARNING!
A (x2)
Vertical Bracket
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT
SUPERVISION IS REQUIRED.
S-A (x4)
M6x12mm Screw
S-B (x4)
M6 Washer
S-C (x4)
M6 Nut
T-A (x1)
4mm Allen Wrench
T-B (x1)
M6 Wrench
T-A
T-B
S-B
S-C
A
S-A
VESA Bracket
