Vivo STAND-V001T User manual

Single Monitor Extra Tall Desk Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-v001t
SKU: STAND-V001T
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
A (x1)
Arm
B(x1)
Pole
C(x1)
Pole
M-A (x4)
M4x12
J (x1)
Support Plate
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
D(x1)
“C” Clamp
E(x1)
Grommet Plate
F (x1)
Pole Connector
G(x2)
Cable Clip
H (x1)
Pole Cover
I (x5)
So Pad
M-C (x4)
D5 Washer
M-B (x4)
M5x12
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
K (x1)
3mm Allen
Wrench
L (x1)
4mm Allen
Wrench
M (x1)
6mm Allen
Wrench

3
ASSEMBLY STEPS
STEP 1
OPTION A: “C” Clamp Installation
Slide the cable management clip (G) and base cover (H) on to the bottom pole (B). Thread the bottom
pole (B) onto the clamp (D). Tighten the grub screws into the bottom of the clamp (D) using 3mm
allen wrench (K). Secure the clamp (D) to the desktop as shown in diagram.
TOOLS NEEDED
17.6lbs
(7.98kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
OPTION B: Existing Grommet Hole Installation
Remove the screw from the top of the bolt in the clamp (D). Stick the so pads (I) to the bottom of the
grommet base (E).
I
10-88mm
K
G
H
D
B
D
E
I

4
STEP 1 (continued)
Slide the cable management clip (G) over the bottom of the top pole (C). Use the pole connector (F) to
attach the top pole (C) to the bottom pole (B), using the 3mm allen wrench (K).
STEP 2
10-8 8m m
G
H
J
K
B
OPTION B: Existing Grommet Hole Installation
Slide the cable management clip (G) and base cover (H) on to the bottom pole (B). Thread the bottom
pole (B) onto the grommet base (E). Tighten the grub screws in the bottom of the grommet base
(E), using the 3mm allen wrench (K). Slide the metal pad (J) over the bolt, then slide it through the
grommet hole in the bottom of the desktop. Thread into the bottom of the pole (C).
G
F
C
K

5
STEP 3
Attach two bolts (M-A or M-B) and washers (M-C) to the top mounting holes of your monitor, making
sure to leave 3mm of threads exposed. Align the bolts (M-A, M-B) in the VESA plate.
Slide the arm (A) over the top of pole. Tighten using the 5mm allen wrench (L).
STEP 4
A
L
3
M- A
M- B
M- C
1 2
3m m
L

6
STEP 5
Adjust the tension in the monitor bracket with 6mm allen key (M) as shown in diagram.
STEP 4 (continued)
Secure using two more bolts (M-A or M-B) and washers (M-C) in the bottom two holes. Tighten all four
bolts using a phillips screwdriver.
M- A
M- B
M- C
M
+45 °
-45°

7
STEP 6
Store the allen wrenches (M, L) in the cable management clip (G) for future adjustment. Adjust as
desired.
L
M

LAST UPDATED: 03/06/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303