Vivo LTV32HD Instructions for use

www.vivotvs.com
32 LCD TV with HD Tuner”
LTV32HD

1

2
Thank you for your purchasing the latest generation high definition LCD TV. Endowed with high
display quality and light weight, it is power-saving and radiationless with high sensitivity
reception. This LCD TV will bring you safe & comfortable brand-new visual experience.
Applying color active matrix TFT with brand-new technologies, the product can provide high
quality display image, flicker free television, VCD & DVD programs. In addition, it can be used
as definition digital television or computer display. We believe the product will surely make you
satisfied.
television
Product Introduction
Warning...........................................................................................1
Table of Contents..............................................................................2
Product Introduction..........................................................................2
Safety Precaution..............................................................................3
Safety...............................................................................................4
TV Stand Installation..........................................................................6
Control Panel....................................................................................7
Terminal Wiring Diagram....................................................................8
Remote Control.................................................................................9
Battery Replacement.......................................................................10
Antenna Connections.......................................................................11
Channel Selection............................................................................12
Channel Return................................................................................13
TV and DTV Searching......................................................................14
Video...............................................................................................15
Audio..............................................................................................18
TV...................................................................................................20
Setup..............................................................................................24
Parental..........................................................................................26
Multimedia.......................................................................................28
Troubleshooting...............................................................................29
Product Specification........................................................................30

Safety Precaution
♦Do not place the TV on unstable places, from which it may be fell off.
Do not expose the TV to extreme temperature and humid environment.
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
Avoid subjecting the TV to direct sunlight and other heat sources.
Do not put the TV into any liquid.
Do not put anything inside the TV, or place water container on top of the TV.
In thunder rainy days (especially with lightening), please plug out the power plug and antenna plug.
Do not step on the power cable, or tangle them together.
Avoid overload of the exterior electric outlet to prevent fire hazard of electric shock.
Clean the TV with dry and soft cloth (without evaporative matter).
If your TV is broken, do not repair it by yourself, but contact the maintenance personnel.
If the remote control is left unused for a long time, please take the batteries out and store them in dry places.
Avoid dropping the remote control.
If the LCD TV is installed for exhibition purpose, please do not place the overheated part on the ground or
carpet to prevent accident.
Please install the TV at proper position, such as wall or ceiling. Please install it under the guidance of
Professional staff. (When used or exhibit, please do not place the TV horizontally or vertically on the ground.)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment should avoid from waterdrops “and” things that fill with liquid, such as vases,
cannot be placed on this equipment.
This equipment is predeterminated to work constantly (unless adding switch on this equipment).
Please disconnect the power cord before long time unused.
Basic Operations
Power on/off
1.UseAC100-240VpoweroutletfortheTV power supply.
2.IfthescreenofTV is not on, please press the power button on the remote control or on the TV.
3.IfyouwanttoshuttheTV temporary,please press the power button on the remote control or on the TV.
4.Ifyourwanttoshutoffthe TV completely,pleaseplugoutthepowerplug.
Auto screen shut off function
Pre-shut off memory
Precaution of signal source application
TheTV will enter idle state if there is no signal input within 5 minutes.
The setting and tuning of picture and sound will be saved when the TV is shut off, which will be working
in the pre-shut off state when the TV is turn on again.
1. If PC signal source is used, please first set the resolution of the PC display card as the following modes:
(1360X768 60Hz, 1280X768 60Hz, 1024X768 60 , 800X600 60 )
2. If there is line-by-line output of the signal used by the user, signal source with line-by-line output is recommended.
Hz Hz
3

4

5

Your television is packaged with the TV stand separated from the cabinet. To setup the
TV table stand, please carry out the installation according to the instructions below.
Step one
Place the TV faced down on a soft cloth or cushion to prevent the LCD panel from being
damaged.
Note:
1. The LCD panel is easy to scratch, so please choose an absolutely flat surface to place
the TV, and use soft cloth or cushion to protect the TV panel.
2. Unplug the AC cord first when installing or removing the TV stand.
Step two
Take the stand. Please align the screw holes of the stand and TV.
Step three
Insert the four M4 stand screws and tighten them.
Please refer to the picture given below.
6
QuantityScrews sort and position
2 pcs
Upper machine screws
M4 x10mm
Lower tapping screws
M4 x12mm 2 pcs
M4 x10mm
Lower tapping screws
M4 x 12mm
Upper machine screws

Introduction for each key
7

8
LCD
:This button can be used to switch the set between ON and OFF.

9
Descriptions of Television Remote Control
Selects the different picture mode directly.

10

11
In order to receive TV programs emitted by satellite, a satellite
receiver should be connected to the rear of the LCD TV. Mean
while, in order to receive encoded emit signal, a decoder should
be connected to the rear of LCD TV.
Using the coaxial cable
Connect the coaxial cable connectors to
The decoder output terminal.
The antenna input terminal.
If you want to connect the TV to satellite receiver (or decoder) and
video recorder at the same time, the following operation should be
followed:
Connect receiver (or decoder) to video recorder.
Connect video recorder to LCD TV, or connect receiver (or decoder)
directly to LCD TV.
♦
♦
♦
♦
In order to receive TV programs, signal should be received
from one of the following signal sources:
Outdoor antenna.
Cable TV network.
Satellite broadcast network.
1. In these three cases, the input cable of antenna or TV network
should be plugged in the 75 Ohm coaxial cable jack at the rear
side of LCD TV.
2. If you are using indoor antenna and the effect of TV program is
not satisfactory, you can adjust the position of the antenna until
the picture is clear.
When installing LCD TV, please use special 75 Ohm coaxial Cable.
If other coaxial cable is used, there may be noise and image
disturbances.
♦
♦
♦
Connecting to Satellite Receiver or Decoder
Connecting to Satellite Receiver or Decoder

12
2. If you want to select program number
from 10-99: Input the channel number
you desired, then press OK to confirm,
e.g. select channel 12.
2. If you want to select program number
after 99: Input the channel number
you desired, then press OK to confirm,
e.g. select channel 100.
1. Use the buttons on the television penel to conduct channel selection,
press “CH+/-” buttons on front panel to select channel.
2. “CH+/-” buttons of the remote control may also be applied to conduct
channel selection.

13
Volume

Cancel
Exit
Exit
14
English
Español
Français
Deutsch
Italiano

OK
OK
OK
OK
15
Press the “ ” button to select the “Picture Mode”
item, and then use “ ” button to adjust the preset
picture mode.
Note: Only in User mode you can adjust brightness,
contrast, saturation, etc.
Picture Mode User
Picture Mode User
Picture Mode User
Picture Mode User
Picture Mode User

.
OK
OK
OK
Advanced Video
16
Picture Mode User
Picture Mode User
Picture Mode User

OK
OK
VGA
VGA
17
OK
Picture Mode User

18
Sound Mode Off
Press the “ ” button to select the “sound Mode”
item, and then use “ ” button to adjust the preset
sound mode.
Sound Mode Off
Sound Mode OffSound Mode Off
Sound Mode OffSound Mode Off
Sound Mode OffSound Mode Off

19
Sound Mode OffSound Mode Off
Sound Mode OffSound Mode Off