Vizio M420VT User manual

VIZIO M420VT/M470VT User Manual
Dear VIZIO Customer,
Congratulations on your new VIZIO High Definition LCD Television purchase. This User Manual
covers the following models: M420VT and M470VT, for specific difference between the models
please refer to the specification sheets in Chapter 9. Thank you for your support. For maximum
benefit of your set, please read these instructions before making any adjustments, and retain them for
future reference. We hope you will experience many years of enjoyment from your new VIZIO HDTV
High Definition Television.
For assistance, please call 877-MYVIZIO (877-698-4946) or e-mail us at www.VIZIO.com.
To purchase or inquire about accessories and installation services for your VIZIO HDTV, please visit
our website at www.VIZIO.com or call toll free at [phone].
We recommend you register your VIZIO HDTV either at our website www.VIZIO.com or fill out and
mail your registration card. For peace of mind and to protect your investment beyond the standard
warranty, VIZIO offers on-site extended warranty service plans. These plans give additional coverage
during the standard warranty period. Visit our website or call us to purchase a plan.
Write down the serial number located on the back of your HDTV for easy reference when obtaining
warranty support:
Serial #: _____________________ Purchase Date _____________________
VIZIO is a registered trademark of VIZIO, Inc. dba V, Inc.
HDMI logo and “High Definition Multimedia Interface” are registered trademarks of HDMI Licensing LLC.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
and are trademarks of SRS Labs, Inc.
TruSurround HD and TruVolume technologies are incorporated under license from SRS Labs, Inc.
This product qualifies for ENERGY STAR in the “factory )” setting and this is the setting in which
power savings will be achieved. Changing the factory de or enabling other features will increase
power consumption that could exceed the limits necessa ergy Star rating.
default (Home U
fault picture setti
ry to qualify for En
se
ng
THE TRADEMARKS SHOWN HEREIN ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS;
IMAGES USED ARE FOR ILLUSTRATION PURPOSES ONLY. VIZIO, THE V LOGO, WHERE VISION
MEETS VALUE AND OTHER VIZIO TRADEMARKS ARE THE INTELLECTUAL PROPERTY OF VIZIO
INC. PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. © 2010 VIZIO
INC. ALL RIGHTS RESERVED.
Version 4/29/2010 1
www.VIZIO.com

VIZIO M420VT User Manual
Im
2
portant Safety Instructions
ured to operate within defined design limits, and misuse
•To reduce the risk of electric shock or component damage, switch off the power before
ur
e,
ire,
urce, such
e
in
ient
persons.
mat
Your HDTV is designed and manufact
may result in electric shock or fire. To prevent your HDTV from being damaged, the following
instructions should be observed for the installation, use, and maintenance of your HDTV. Read
the following safety instructions before operating your HDTV. Keep these instructions in a safe
place for future reference.
connecting other components to your HDTV.
•Unplug the power cord before cleaning your HDTV. A damp cloth is sufficient for cleaning yo
HDTV. Do not use a liquid or a spray cleaner for cleaning your HDTV. Do not use abrasive
cleaners.
•Always use the accessories recommended by the manufacturer to insure compatibility.
•When moving your HDTV from an area of low temperature to an area of high temperatur
condensation may form in the housing. Wait before turning on your HDTV to avoid causing f
electric shock, or component damage.
•Use only with the cart, stand, tripod, bracket, or table specified by manufacturer or sold with your
HDTV. When a cart is used, use caution when moving the cart/HDTV combination to avoid injury
from tip-over. Do not place your HDTV on an unstable cart, stand, or table. If your HDTV falls, it
can injure a person and cause serious damage to your HDTV. Use only a cart or stand
recommended by the manufacturer or sold with your HDTV.
•A distance of at least 3 feet should be maintained between your HDTV and any heat so
as a radiator, heater, oven, amplifier etc. Do not install your HDTV close to smoke. Operating
your HDTV close to smoke or moisture may cause fire or electric shock.
•Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensur
reliable operation of your HDTV and to protect it from overheating, be sure these openings are
not blocked or covered. Do not place your HDTV in a bookcase or cabinet unless proper
ventilation is provided.
•Never push any object into the slots and openings on your HDTV cabinet. Do not place any
objects on the top of your HDTV. Doing so could short circuit parts causing a fire or electric shock.
Never spill liquids on your HDTV.
•Your HDTV should be operated only from the type of power source indicated on the label. If you
are not sure of the type of power supplied to your home, consult your dealer or local power
company.
•Do not apply pressure or throw objects at your HDTV. This may compromise the integrity of the
display. The manufacturer’s warranty does not cover user abuse or improper installations.
•The power cord must be replaced when using different voltage than the voltage specified. For
more information, contact your dealer.
•Your HDTV is equipped with a three-pronged grounded plug (a plug with a third grounding
pin). This plug will fit only into a grounded power outlet. This is a safety feature. If your outlet
does not accommodate the three-pronged, have an electrician install the
correct outlet, or use an adapter to ground your HDTV safely. Do not
defeat the safety purpose of the grounded plug.
•When connected to a power outlet, power is always flowing into your
HDTV. To totally disconnect power, unplug the power cord.
•The lightning flash with arrowhead symbol with
an equilateral triangle is intended to alert the user
to the presence of un-isolated, dangerous voltage
within the inside of your HDTV that may be of suffic
magnitude to constitute a risk of electric shock to
•The excla ion point within an equilateral triangle is intended to alert the
www.VIZIO.com

VIZIO M420VT/M470VT User Manual
user to the presence of important operating and servicing instructions in the literature
accompanying your HDTV.
•Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
•The wall socket should be installed near your HDTV and easily accessible.
•Only power of the marked voltage can be used for your HDTV. Any other voltage than the
specified voltage may cause fire or electric shock
•Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power
cord during electrical storms.
•Unplug your HDTV during a lightning storm or when it will not be used for long period of time.
This will protect your HDTV from damage due to power surges.
•Do not attempt to repair or service your HDTV yourself. Opening or removing the back cover may
expose you to high voltages, electric shock, and other hazards. If repair is required, contact your
dealer and refer all servicing to qualified service personnel.
•Keep your HDTV away from moisture. Do not expose your HDTV to rain or moisture. If water
penetrates into your HDTV, unplug the power cord and contact your dealer. Continuous use in
this case may result in fire or electric shock.
•Do not use your HDTV if any abnormality occurs. If any smoke or odor becomes apparent, unplug
the power cord and contact your dealer immediately. Do not try to repair your HDTV yourself.
•Avoid using dropped or damaged appliances. If your HDTV is dropped and the housing is
damaged, the internal components may function abnormally. Unplug the power cord immediately
and contact your dealer for repair. Continued use of your HDTV may cause fire or electric shock.
•Do not install your HDTV in an area with heavy dust or high humidity. Operating your HDTV in
environments with heavy dust or high humidity may cause fire or electric shock.
•Follow instructions for moving your HDTV. Ensure that the power cord and any other cables are
unplugged before moving your HDTV.
•When unplugging your HDTV, hold the power plug, not the cord. Pulling on the power cord may
damage the wires inside the cord and cause fire or electric shock. When your HDTV will not be
used for an extended period of time, unplug the power cord.
•To reduce risk of electric shock, do not touch the connector with wet hands.
•Insert batteries in accordance with instructions. Incorrect polarities may cause the batteries to
leak which can damage the remote control or injure the operator.
•If any of the following occurs, contact the dealer:
oThe power cord fails or frays.
oLiquid sprays or any object drops into your HDTV.
oYour HDTV is exposed to rain or other moisture.
oYour HDTV is dropped or damaged in any way.
oThe performance of your HDTV changes substantially.
Version 4/29/2010 3
www.VIZIO.com

VIZIO M420VT User Manual
Television Antenna Connection Protection
External Television Antenna Grounding
If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the
antenna or cable system is electrically grounded to provide some protection against voltage surges and
static charges.
Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper
grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge
unit, size of the grounding conductors, location of antenna discharge unit, connection to grounding
electrodes, and requirements of the
grounding electrode.
ghtning storm or when it is left unattended
ong periods of time, unplug the
or power circuits, or where it could fall into such power
emember, the screen of the coaxial cable is intended to be connected to earth in the building
r,
ces, gaming consoles,
s listed below, as appropriate:
on)
Lightning Protection
For added protection of the TV during a
li
or unused for l
TV from the wall outlet and disconnect the
antenna or cable system.
Power Lines
Do not locate the antenna near overhead light
lines or circuits.
R
installation.
FCC Bulletin for New TV Owners
The nationwide switch to digital television broadcasting will be complete on June 12, 2009, but your local
television stations may switch sooner. After the switch, analog-only television sets that receive TV
programming through an antenna will need a converter box to continue to receive over-the-air TV. Watch
your local stations to find out when they will turn off their analog signal and switch to digital-
only broadcasting. Analog-only TVs should continue to work as before to receive low powe
Class A or translator television stations and with cable and satellite TV servi
VCRs, DVD players, and similar products.
ation, please contact the partieFor additional inform
FCC (US Federal Communications Commissi
http://www.fcc.gov/
C (1-888-225-5322)Phone: 1-888-CALL-FC
TTY: 1-888-TELL-FCC (1-888-835-5322)
Fax: [phone]
E-mail: [email protected]
NTIA (National Telecommunications and Information Administration)
ttp://www.ntia.doc.gov/h 1-888-DTV-2009
Listings of US Television Stations: http://www.high-techproductions.com/usTVstations.htm
Note: Your HDTV comes w
converter box is needed.
ith a built-in tuner capable of processing digital broadcasts. No extra
4
www.VIZIO.com

VIZIO M420VT/M470VT User Manual
T
C
C
SEA
R
CHA
U
C
C
C
C
S
C
able of Contents
Important Safety Instructions..................................................................................................................... 2
Television Antenna Connection Protection ............................................................................................... 4
FCC Bulletin for New TV Owners.............................................................................................................. 4
Opening the Package................................................................................................................................ 7
HAPTER 1 SETTING UP YOUR HDTV..................................................................................................... 8
Attaching the TV Stand..............................................................................................................................8
Wall Mounting Your HDTV ........................................................................................................................ 9
HAPTER 2 BASIC CONTROLS AND CONNECTIONS.......................................................................... 10
Front Panel .............................................................................................................................................. 10

Side Panel Controls................................................................................................................................. 10
Rear and Side Panel Connections .......................................................................................................... 11
Remote Control Buttons .......................................................................................................................... 13
Programming the Remote Control........................................................................................................... 14
RCHING AUTOMATICALLY FOR THE CODES................................................................................ 14
emote Control Range............................................................................................................................ 15
VIZIO Remote Control Precautions ......................................................................................................................15
Inserting the remote control batteries ...................................................................................................................15
Using a Cable or Satellite Remote .......................................................................................................................15
PTER 3 CONNECTING EQUIPMENT................................................................................................ 16
Connecting Your Cable or Satellite Box.................................................................................................. 17
Using HDMI..........................................................................................................................................................17
sing Component Video ......................................................................................................................... 19
onnecting Coaxial (RF) ......................................................................................................................... 20
Using Your Antenna or Digital Cable for DTV ......................................................................................................20
Using Your Antenna or Cable for TV....................................................................................................................20
Using the Antenna or Cable through your VCR....................................................................................................20
Connecting Your DVD Player.................................................................................................................. 21
Using HDMI..........................................................................................................................................................21
Using Component Video ......................................................................................................................... 23
Using Composite (AV) Video................................................................................................................... 24
ONNECTING A USB (FAT32 FORMAT) STORAGE DEVICE ............................................................... 24
Connecting an external Receiver/Amp.................................................................................................... 25
Connecting a PC (Computer) .................................................................................................................. 26
HAPTER 4 GETTING STARTED............................................................................................................. 27
HAPTER 5 USING YOUR HDTV FOR THE FIRST TIME ....................................................................... 28
Watching a TV Program .......................................................................................................................... 28
elect Input Source ................................................................................................................................. 28
Viewing Digital TV Program Information ................................................................................................. 29
INFO Button .........................................................................................................................................................29
HAPTER 6 YOUR HDTV SETTINGS ...................................................................................................... 30
Using the HDTV Settings Menu .............................................................................................................. 30
TV Menu .................................................................................................................................................. 30

Timer Menu ............................................................................................................................................. 30
Multimedia Menu ..................................................................................................................................... 30

Wide Menu .............................................................................................................................................. 30
Audio Menu ............................................................................................................................................. 31

Picture Menu ........................................................................................................................................... 31
Parental Menu ......................................................................................................................................... 31
Version 4/29/2010 5
www.VIZIO.com

VIZIO M420VT User Manual
Help Menu ............................................................................................................................................... 31
CC (Closed Caption) Menu ..................................................................................................................... 31
6
C
C
C
Index........................................................................................................................................................ 54
Code for Programming the Remote Control............................................................................................ 55
HAPTER 7 ADJUSTING YOUR HDTV SETTINGS ................................................................................ 32
TV Settings .............................................................................................................................................. 32
Input......................................................................................................................................................... 32
Channels ................................................................................................................................................. 32
Menu Language....................................................................................................................................... 33
Date & Time............................................................................................................................................. 33
PC Settings.............................................................................................................................................. 33
Timer Menu ............................................................................................................................................. 34
Multimedia Menu ..................................................................................................................................... 34
Wide Menu .............................................................................................................................................. 36
Audio Menu ............................................................................................................................................. 38
Picture Menu ........................................................................................................................................... 39
Parental Menu ......................................................................................................................................... 41
Help Menu ............................................................................................................................................... 43
CC (Closed Caption) Menu ..................................................................................................................... 43
HAPTER 8 MAINTENANCE AND TROUBLESHOOTING ..................................................................... 44
Cleaning the TV and Remote Control ..................................................................................................... 44
Troubleshooting Guide ............................................................................................................................ 44
Telephone & Technical Support .............................................................................................................. 47
Compliance.............................................................................................................................................. 47
FCC Class B Radio Interference Statement ........................................................................................... 48
CHAPTER 9 SPECIFICATIONS ................................................................................................................ 49
Preset PC Resolutions ............................................................................................................................ 51
HAPTER 10 WARRANTY........................................................................................................................ 52
www.VIZIO.com

VIZIO M420VT/M470VT User Manual
Opening the Package
Your VIZIO HDTV and accessories are carefully packed in a cardboard carton that has been designed to
protect it from transportation damage. Now you have opened the carton check that your HDTV is in good
condition and that all of the accessories are included.
Due to the weights and sizes of your HDTV models, we strongly advise that you have at least 2 people to
unpack and install the HDTV.
The screen can easily be scratched or broken so please handle the product gently and never place the
HDTV with the glass facing downwards on a surface without protective padding.
IMPORTANT: Save the carton and packing material for future shipping.
Package Contents
VIZIO M420VT or M470VT
Detachable Stand Base
4 Thumbscrews (to attach Stand)
VIZIO Remote Control
Screen Cleaning Cloth
This User Manual
Quick Setup Guide
Registration Card
2 AA Batteries for the Remote Control
Caution: Do not apply pressure or throw objects at your HDTV. This may compromise the integrity
of the display. The manufacturer’s warranty does not cover user abuse or improper installations.
HDTV Accessories and Services
Additional certified accessories for your HDTV are sold separately, including:
•Wall mounts
•High Definition cables
•Extra or replacement remote controls
•Sound Bars
•Blu-ray DVD Players
VIZIO also offers installation services and extended warranty services for your HDTV.
To purchase or inquire about additional accessories and services for your VIZIO HDTV, visit our website
at www.VIZIO.com or call us toll free at 877-MYVIZIO (877-698-4946).
Version 4/29/2010 7
www.VIZIO.com

VIZIO M420VT User Manual
Chapter 1 Setting Up Your HDTV
•Read this user manual carefully before installing your HDTV.
•For the power consumption of your HDTV, please check the specification sheet for your model in
Chapter 6. When an extension cord is required, use one with the correct power rating. The cord
must be grounded and the grounding feature must not be compromised.
•Install your HDTV on a flat surface to avoid tipping.
•For proper ventilation, you must allow a 1” space between the back of your HDTV and the wall.
•Avoid installing your HDTV in places with high humidity, dust, or smoke so you do not shorten the
service life of the electronic components.
•Install your HDTV in a level, landscape orientation, with the VIZIO logo at the bottom to prevent
poor ventilation and excessive component damage.
•If you want to mount your HDTV on the wall, see below for additional information.
•Read this user manual carefully before installing your HDTV.
VIZIO offers professional installation. Contact VIZIO for more information on these services at 877-
MYVIZIO (877-698-4946) or www.VIZIO.com.
Attaching the TV Stand
Note: We strongly recommend that two people perform the setup and assembly due to the weight and
size of the TV.
8
To unpack the TV and stand base:
1. Remove the remote control, batteries, and power cord
from the foam end caps.
2. Remove the two top foam end caps.
3. Remove the stand base under foam end cap.
4. Remove the TV from the box and lay it
face down on a clean, flat surface.
Note: Make sure that the surface is free of
debris to prevent the TV screen from getting
scratched.
To attach the TV stand
base:
1. Line up the stand
neck (attached to the
TV) with the stand
base.
2. Push the stand base onto the stand
neck.
3. On the bottom of the base, insert the
included (Qty. 4) thumbscrews and
tighten it.
4. Move the TV into an upright position.
Caution: Do not apply pressure to the screen or throw objects at your HDTV. This may compromise the
integrity of the display. The manufacturer’s warranty does not cover user abuse or improper installations.
www.VIZIO.com

VIZIO M420VT/M470VT User Manual
To remove the base stand:
1. Unplug all cables from the HDTV.
2. Place your HDTV face down on a soft and flat
surface (blanket, foam, cloth, etc) to prevent any
damage to the TV.
3. Remove the total of eight (4) screws holding the
base stand to the TV.
4. Carefully remove the stand, pulling the base towards
you.
To find the perfect mount for your HDTV, browse VIZIO’s certified mount selection at www.VIZIO.com or
call directly 888-VIZIOCE (888-849-4623).
Wall Mounting Your HDTV
Your HDTV can be mounted on the wall for viewing. If you choose to mount your HDTV on the wall, follow
the instructions below.
1. Write down the serial number located on the back of your HDTV in the space provided on page 1 to
have it handy if you need to call for support.
2. Remove the stand base and neck:
a. Disconnect the cables from your
HDTV.
b. Place your HDTV face down on a
soft, flat surface to prevent damage
to the screen.
c. Remove the TV stand base per
above instructions.
3. Mount your HDTV on the wall:
a. Attach your HDTV to a wall mount
(sold separately) using the mounting
holes in the back panel of your HDTV (see illustration at the right).
b. Read the instructions that came with your specific wall mount to properly hang your HDTV.
M420VT/M470VT Wall Mounting Specifications
Screw Size •M6
Screw Length •10 mm
Screw Pitch •1.0mm
Hole Pattern •VESA standard 200mm x 200mm
NOTE: If using wall mounts different from our certified ones, please verify that they are
UL/CSA/ETL listed wall mount brackets with suitable weight specs.
Version 4/29/2010 9
www.VIZIO.com

VIZIO M420VT User Manual
Chapter 2 Basic Controls and Connections
Front Panel
POWER ‘VIZIO’ LIGHT– The VIZIO name lights
white when powered on and it will get dimmer
when powered off.
REMOTE CONTROL SENSOR – This is the
window through which all of the remote control
signals pass to the sensor. Point the remote
control directly at this window for the best
response to the remote signal.
Side Panel Controls
() – Press this button once to power your
TV on. Press the button again to power the TV off.
MENU – This button activates the On
Screen Display (OSD). If a sub-menu is
active, pressing this button will return to
the previous menu level.
CH ST – Use these buttons to step
up or down the TV channels. While the
OSD is active, these buttons function as
up and down controls in the OSD
menus.
VOL WX – Use these buttons to
increase or decrease to the speaker
volume. While the OSD is active, these
buttons function as left and right
controls in the OSD menus.
INPUT (ENTER) – Repeated pressing
of this button steps through the input sources in the following
sequence: DTV/TV, AV, COMPONENT, HDMI1, HDMI2, HDMI3,
HDMI4, RGB and Multimedia. Once you have stepped through the
entire sequence, you will return to the beginning of the sequence.
Additionally, when the OSD is active, press this button to exit from the OSD menu.
When the OSD is not active, this button will show the current input selections.
10
Note: When using the A/V input (usually, a composite signal) the video signal (yellow color coded cable)
need to be connected to the green jack connector
www.VIZIO.com

VIZIO M420VT/M470VT User Manual
Rear and Side Panel Connections
Version 4/29/2010 11
www.VIZIO.com

VIZIO M420VT User Manual
No. Connection Description
1 RGB PC /PC
Audio
Connect the video from a computer here. Connect the audio (1/8
in. mini plug stereo connector) from a computer here.
2
COMPONENT
(YPb/CbPr/Cr
with Audio L/R)
Connect your primary source component (like a DVD Player or set
top box) here. From left to right, use green for Y, blue for Pb (or
Cb), and red for Pr (or Cr) inputs. Use white for left audio and red
for right audio. When using the A/V input (usually, a composite
signal) the video signal (yellow color coded cable) need to be
connected to the green jack connector.
3 DTV/TV
(Cable/Antenna)
Connect to an antenna or digital cable for digital TV. For digital TV
stations in your area visit www.antennaweb.org.
4 SERVICE
For factory service only. Use of this input for any purpose other
than factory authorized service will void the manufacturer’s
warranty of this equipment.
5 USB
Connect a storage source (format FAT32) JPEG, MP3 and Video
files (like a hard drive or thumb drive or card reader). It is
recommended to back up your important document files as a
precaution to prevent lost of data.
6 HDMI
Best connection in the field to transmit digital Audio and Video
content. Connect an audio/video source for digital video such as a
DVD multimedia player, a digital set-top box for cable or satellite
receiver system. Your TV comes with four HDMI inputs.
7 SPDIF
Connect an SPDIF Optical cable from your HDTV to your home
theater system to play digital audio through your home speakers.
Note: When using the A/V input (usually, a composite signal) the video signal (yellow color coded cable)
need to be connected to the green jack connector. Expect to see a black/white video in the Component
input, if it is selected by accident.
Certified HDMI and HDMI-DVI cables are available for purchase from www.VIZIO.com or by calling 888-
VIZIOCE (888-849-4623)
12
www.VIZIO.com

VIZIO M420VT/M470VT User Manual
Remote Control Buttons
SET — Use to program a different device (DVD, AUDIO SYSTEM, TV and CABLE/SATELLITE BOX) to
be controlled by this control.
POWER ( ) — Press to turn the TV on from the Standby mode.
Press it again to return to the Standby mode.
DVD, AUDIO, TV and CABLE — Press the button of the equipment
you would like to control using this remote control. Make sure that the
remote has been set up the code to the specific device.
RECORD, PAUSE, PLAY and STOP —
Only PAUSE (pause the slideshow), PLAY (start the slideshow) and
STOP (stop the slideshow) are active buttons for your HDTV. The
RECORD button does not operate your TV.
SKIP BACK, BACKWARDS, FAST
FORWARD and SKIP FORWARD — These buttons are used in the
Multimedia feature. They are also function keys used by other devices,
mainly DVD and DVR devices. Skip Back allows jumping to previous
chapter in DVD and DVR. Backwards (Rewind in the old VCRs)
allows reviewing previous scenes. Fast Forward allows to reviewing
the next scenes. Skip Forward allows jumping to next chapter in
DVD and DVR.
HDMI — Press to select the HDMI input. Press repeatedly to cycle
through the HDMI inputs.
COMP — Press to select the Component input.
AV — Press to select the AV or Composite input.
TV — Press to select the TV or RF input.
Color-Coded Programmable Keys — These
buttons are keys which could be customized with most used
commands, they usually perform cable, satellite and teletext functions.
LIST — This button is most commonly used by cable and satellite
boxes to display the list of your recorded programs. This key allows
opening the channels list OSD of your HDTV.
INPUT — Press to cycle through the various devices connected to
your TV (called Inputs). The inputs cycle in the following sequence:
DTV/TV, AV COMPONENT, HDMI 1, HDMI 2, HDMI 3, HDMI 4, RGB
and USB. Once you have stepped through the entire sequence, you
will return to the beginning.
EXIT— Press to exit from open menus.
MENU — Press it to bring up the OSD menu on your HDTV.Up (▲),
Down (▼), Left (◄) or Right (►) navigation
buttons — Press to navigate open menus,
adjust other TV settings such as Brightness and Contrast, or turn menu options On
and Off.
OK —When the OSD menu is up, pressing this key select the highlighted option in
the menu.
Version 4/29/2010 13
www.VIZIO.com

VIZIO M420VT User Manual
BACK — When use with the TV, this button behaves in the same way
as the LAST button. It is used as a functional key on the set-top box for
cable and satellite services with DVR features. It allows skipping back to
previous prerecorded programs.
GUIDE — This button does not function with your TV, follow the INFO
description to see programming information.
VOL ▲/▼— Press it to either increase or decrease the volume level of
the sound.
MEDIA — Use to select viewing of pictures, play music and watch video
on a USB device connected to the USB port.
LAST — Press to recall the previously viewed channel. When the Menu
is active, press this button repeatedly to go to the previous levels of the
OSD.
— Press to turn the sound on and off.
CH ▲/▼— Press to change the channels up or down.
Number Button Pad — Press to select a channel or enter a password.
INFO — Press to display program and channel information.
(DASH) — Press to insert a dash between the main and sub-
channels. For example, channel 28-2 would be selected by the button sequence 2, 8, DASH, 2.
Programming the Remote Control
The included remote control can be programmed to control different devices: DVD players, Audio Players,
TV and Set-Top Boxes. Please, refer to the tables at the end of this User’s manual for the different codes
to match the different manufacturers including the codes for VIZIO preferred accessories and equipment
systems. The following procedure is required to do the programming:
1. Find the matching code and write it down, some makers may have more than one code. It may
require trying all of them to find the one matching your specific model.
2. Press and release the key matching your equipment: DVD, AUDIO, TV or CABLE.
3. Press and hold down the SET key until the light indicator blinks twice.
4. Release the SET key, and press the 5-digits code you had written down on Step 1.
5. The light indicator should blink twice again after you had entered the last digit, it means that the
remote control has accepted the code. At this point, you should try to use the power button to turn
off and on the equipment.
6. Try different keys to confirm that your accessory or equipment responds properly. If it is not the
case and other codes are applicable, please try Steps 1 through 5 to the next code until the
correct code is found.
Searching Automatically for the Codes
If the device does not respond to the remote control after trying all listed codes for the brand, or if the
brand is not listed, then try searching for code as follows:
1. Turn on the device.
2. Press and hold the device key for 3 seconds. LED indicator comes ON. Release key.
3. Press and release PLAY key, the indicator goes OFF during pressing and comes ON after
release.
4. Aim the remote control at the device. Press either the channel up or channel down key to start
searching.
5. If the device turns off a working code has been found. Press OK key to save this code and exit
the code search. The LED indicator flashes slowly 4 times and it goes OFF.
14
www.VIZIO.com

VIZIO M420VT/M470VT User Manual
Remote Control Range
•The effective range of the remote control is approximately 26 feet (8 meters) from the front of the
receiver window and 13 feet (4 meters) when 30° to the left and right, 20° up and down.
•Point the remote control at the remote control sensor on the front of your HDTV to send
commands.
•Do not place any obstacles between the remote control and the remote control sensor.
VIZIO Remote Control Precautions
•Keep the remote dry and away from heat sources and humidity.
•If your HDTV responds erratically to the remote control or does not respond at all, check the
batteries. If the batteries are low or exhausted, replace them with fresh batteries.
•When not using the remote control for a long period of time, remove the batteries.
•Do not take the batteries apart, heat them, or throw them into a fire.
•Do not subject the remote control to undue physical stress, such as striking or dropping it.
•Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean, damp cloth.
•Do not mix old and new batteries or different types of batteries.
Inserting the remote control batteries
1. Remove the battery cover on the back of the remote control.
2. Insert two AA batteries (included) into the remote control, making sure you match the (+) and (-)
symbols on the batteries with the (+) and (-) symbols inside the battery compartment.
3. Re-attach the battery compartment cover.
Precautionary Tips for Inserting the Batteries:
•Only use the specified AA batteries.
•Do not mix new and old batteries. This may result in cracking or leakage that may pose a fire
risk or lead to personal injury.
•Inserting the batteries incorrectly may also result in cracking or leakage that may pose a fire
risk or lead to personal injury.
•Dispose of the batteries in accordance with local laws and regulations.
•Keep the batteries away from children and pets.
Using a Cable or Satellite Remote
Your VIZIO remote uses codes 11758 and 10178 to work your LCD HDTV. To use a cable or satellite remote
to work the LCD HDTV, refer to your cable or satellite remote user guide for more information on how to
program the remote. If your cable or satellite remote uses a 5-digit code (like most Direct TV units), first try
11758 and then, if that does not work, 10178. If your cable or satellite remote uses a 4-digit code, try 1758 and
then 0178 as an alternative. If your cable or satellite remote uses a 3-digit code (EchoStar or Dish Network for
example), use code 627.
Cleaning the Housing and Remote Control
1. Use a soft cloth for cleaning.
2. If the housing or remote control is seriously contaminated, use a soft cloth moistened with
diluted neutral cleaner to clean the display. Wring water out of the cloth before cleaning to
prevent water from penetrating into the housing. Wipe the display with a dry cloth after
cleaning.
Version 4/29/2010 15
www.VIZIO.com

VIZIO M420VT User Manual
Chapter 3 Connecting Equipment
Your HDTV has six different ways to connect your video equipment from a basic connection to the most
advanced for digital signals.
Connection
Quality
(type)
Connector Description
Best
(digital)
HDMI (High-Definition Multimedia Interface). It is the
first and only industry-supported, uncompressed, all-
digital audio/video interface. HDMI provides an interface
between any audio/video source, such as a set-top box,
DVD player, or A/V receiver and an audio and/or video
monitor, such as a digital television (DTV), over a single
cable.
Best
(digital)
- - - - - - - - -
Good
(analog)
DTV Coaxial RF. When used for MPEG2 encoded bit
streams from ATSC broadcast programming, this input
takes advantage of the High Definition content.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TV Coaxial RF. This is the connection for standard
NTSC TV using antenna or cable.
Best
(analog)
RGB PC (VGA). This video input has separate red, green
and blue color components. The signal carries horizontal
and vertical sync information on the green signal. This is
most commonly used for PC input.
Better
(analog)
Component. The video signal is separated into three
signals, one containing the black-and-white information
and the other two containing the color information. This
enhancement over S-Video takes advantage of the
superior picture provided by progressive scan DVD
players and HDTV formats.
*Good
(analog)
Composite. The complete video signal is carried through
this single pin connector. This is the most commonly
used video connection.
Best
(digital)
USB (Universal Serial Bus). USB is an interface port
designed to connect storage devices holding data
(FAT32 format) files without a need to power off the host
(TV) unit.
*Note: You can use your HDTV Component input to accept A/V signal (Composite) from a source
with A/V out, please plug your video signal (yellow connector) into the Component input (green
connector) and match up the audio connectors (R and L) for the sound. Expect to see a
black/white video in the Component input, if it is selected by accident.
16
www.VIZIO.com

VIZIO M420VT/M470VT User Manual
Connecting Your Cable or Satellite Box
Using HDMI
Cable and Satellite Boxes that have a HDMI digital interface should be connected to the HDMI input of
the LCD HDTV for optimal results.
Note: To maintain the display quality, use a VIZIO certified HDMI cable. Lengths are available up to 10
Meters. See www.vizio.com or call 1-888-VIZIOCE (1-888-849-4623) for details.
Connecting your Cable or Satellite Box (Best)
1. Turn off the power to the LCD HDTV and HDTV Set-Top Box.
2. Connect a HDMI cable to the HDMI output of your HDTV
Set-Top Box and the other end to the HDMI Input at the
side of the LCD HDTV.
3. Turn on the power to the LCD HDTV and HDTV Set-
Top Box.
4. Select HDMI using the INPUT button on
the remote or side of the LCD HDTV, or
directly by pressing the HDMI button on
the Remote Control.
Note:
•The HDMI input on the LCD TV supports High-bandwidth Digital Content
Protection (HDCP). HDCP encrypts the transmission between the video
source and the digital display for added security and protection.
•If you are already using the HDMI1 input for another component, or you do not want to use the
HDMI1 input for the Set-Top Box, you can connect the Set-Top Box to the HDMI2, HDMI3 or
HDMI4 input.
•Refer to your HDTV Set-Top Box user manual for more information about the video output
requirements of the product or consult your cable or satellite operator.
Version 4/29/2010 17
www.VIZIO.com

VIZIO M420VT User Manual
For Cable or Satellite Boxes with DVI:
18
1. Turn off the power to the LCD HDTV and HDTV
Set-Top Box.
2. Using a HDMI-DVI cable, connect the DVI end to
your HDTV Set-Top Box and the HDMI end to the
HDMI2 Input at the side of the LCD HDTV.
3. Using an audio cable (1/8’ stereo connector on
the going into the TV), connect the cable to the
audio output connectors associated with the
DVI output on your HDTV Set-Top Box and
connect the other end to the audio
associated with the RGB input
(blue area) at the rear of the
LCD HDTV.
Turn on the p4. ower to the LCD HDTV and HDTV Set-Top Box.
5. Select HDMI2 using the INPUT button on the remote o
pressing th
r of the V, or directly by
ote:
The HDMI input on the LCD TV supports High-bandwidth Digital Content Protection (HDCP).
side LCD HDT
e HDMI button on the Remote Control.
N
•
HDCP encrypts the transmission between the video source and the digital display for added
security and protection.
•If you are already using the HDMI2 input for another component, or you do not want to use the
HDMI2 input for the Set-Top Box, you can connect the Set-Top Box to the HDMI1, HDMI3 or
HDMI connection. The LCD TV will recognize the DVI connection and obtain audio information
from the audio connectors on the rear of the TV.
•Refer to your HDTV Set-Top Box user manual for more information about the video output
requirements of the product or consult your cable or satellite operator.
www.VIZIO.com

VIZIO M420VT/M470VT User Manual
Using Component Video
Connecting your Cable or Satellite Box (Better)
1. Turn off the power to the LCD HDTV and HDTV Set-Top Box.
2. Connect the Y (green color) connector on your HDTV Set-Top Box to the corresponding Y
(green color) connector in the Component input at the rear of the LCD HDTV.
3. Connect the PbCb (blue color) connector on your HDTV Set-Top Box to the corresponding
Pb (blue color) connector in the Component input at the rear of the LCD HDTV.
4. Connect the PrCr (red color) connector on your HDTV Set-Top Box to the corresponding Pr
Cr (red color) connector in the Component input at the rear of the LCD HDTV.
5. Using an audio cable (white and red connectors), connect the cable to the audio output
connectors associated with the Component output on your HDTV Set-Top Box and connect
the other end to the audio connectors associated with the Component input at the rear of the
LCD HDTV.
6. Turn on the power to the LCD HDTV and HDTV Set-Top Box.
7. Select Component using the INPUT button on the remote or side of the LCD HDTV, or
directly by pressing the COMP button on the Remote Control.
Note:
•Refer to your HDTV Set-Top Box user manual for more information about the video output
requirements of the product or consult your cable or satellite operator.
Version 4/29/2010 19
www.VIZIO.com

VIZIO M420VT User Manual
Connecting Coaxial (RF)
Using Your Antenna or Digital Cable for DTV
1. Turn off the power to the LCD HDTV.
2. Connect the coaxial (RF) connector from your antenna or digital
cable to the DTV/TV CABLE/ANTENNA connector at the rear
of the LCD HDTV.
3. Turn on the power to the LCD HDTV.
4. Select TV using the INPUT button on the remote
or side of the LCD HDTV, or directly by pressing
the TV button on the Remote Control.
Note:
•Not all digital TV broadcasts are High Definition (HD). Refer to the program guides, or consult
your cable, satellite or TV station operator.
•Digital broadcasts are not available in all areas. Refer to www.antennaweb.org for detailed
information.
•Make sure the antenna and coaxial cable are correctly grounded.
Using Your Antenna or Cable for TV
1. Turn off the power to the LCD HDTV.
2. Connect the coaxial (RF) connector from your
antenna or cable to the DTV/TV
CABLE/ANTENNA connector at the rear of the
LCD HDTV
3. Turn on the power to the LCD HDTV.
4. Select TV using the INPUT button on the remote or side of the LCD
HDTV, or directly by pressing the TV button on the Remote Control.
Using the Antenna or Cable through your VCR
1. Turn off the power to the LCD HDTV and VCR.
2. Connect the “Output to TV”, “RF Out” or “Antenna Out”
connector on the rear of your VCR to the DTV/TV
CABLE/ANTENNA connector at the rear of the LCD HDTV.
3. Turn on the power to the LCD HDTV and VCR.
4. Select TV using the INPUT button on the remote or
side of the LCD HDTV, or directly by pressing
the TV button on the Remote Control.
Note: If you have an off-air antenna or cable TV, connect it to the “Antenna In” connector on the rear of
your VCR.
20
www.VIZIO.com