Voice-Acoustic VENIA-6 User manual

VENIA-6
Column line-array loudspeaker
Manual

Herzlichen Dank,
dass Sie ein Voice-Acoustic Produkt gekauft haben.
Seit dem Jahr 2006 entwickeln wir unsere Produkte
in der Überzeugung, dass es auf die Details ankommt.
Wir wünschen Ihnen viel Freude mit diesem Produkt.
Thank you very much,
for purchasing a Voice-Acoustic product.
Since 2006 we have been developing our
products in the rm belief that details matter.
May we wish you a lot of pleasure with this product.
Muchas gracias
por haber comprado un producto de Voice-Acoustic.
Desdel año 2006 estamos desarrollando nuestros productos
estando convencidos, que son los detalles que cuentan.
Le(s) deseamos mucha alegría usando este producto.
Merci beaucoup
d´avoir acheté un produit Voice-Acoustic.
Depuis 2006, nous développons des produits
avec la ferme conviction que les détails comptent.
Nous vous souhaitons beaucoup de plaisir à utiliser ce produit.

Contents
Introduction
General Safety Instructions 4
Care 4
Transport and storage 4
Warranty 4
Components 5
Technical data 6
Connections 6
Setup 7
Connecting cables 7
Operation 7
Working with VENIA-6
Mounting X-Tension Kit 8
Headstacking ying equipment mounting 8
Mounting the U-bracket 9
Mounting the C-bracket 9
Mounting the tilting and swivelling wall brackets 9
Easyy mechanics 10
Installations with Easyy mechanics 10
Overview Accessories 11
Manufacturer‘s declaration
Imprint 13

Page 4 of 13Manual VENIA-6 - 2021-11 EN
General Safety Instructions:
Loudspeakers produce a static magnetic eld even if they are not connected or are not in use. Therefore make
sure when erecting and transporting loudspeakers that they are nowhere near equipment and objects which
may be impaired or damaged by an external magnetic eld. Persons with cardiac pacemakers must maintain a
safe distance.
The minimum recommended safety clearance is 1 m.
Never stand in the immediate vicinity of loudspeakers driven at a high level. Professional loudspeaker systems
are capable of causing a sound pressure level detrimental to human health. Seemingly non-critical sound levels
(from approx. 90 dB SPL) can cause hearing damage if people are exposed to it over a long period.
All connected cables must be laid in such a way that they cannot be crushed by objects and that nobody can
step on them! Replace damaged cables immediately and do not use them!
Use only accessory parts specied by Voice-Acoustic or original accessory parts from Voice-Acoustic. Check all
cabinets and accessories regularly for wear and replace them if necessary.
Do not set up the loudspeakers in places where they are permanently exposed to moisture, dust, dirt or direct
sunlight.
Care
Wipe the surface of loudspeakers only with a damp cloth and pure water. In case of heavy pollution, repeat the
above procedure several times if necessary. Do not use any chemical additives or aggressive detergents, as
these may harm and damage the surfaces.
Transport and storage
When transporting and storing the unit, it is important to ensure that the surface and front grill of the loudspe-
aker are not damaged. Moisture can penetrate through exposed wood surfaces and cause the wood to swell.
A bent or broken front grill will no longer adequately protect the sensitive speaker membranes. In addition,
appreciable dust deposits may considerably impair the functionality of a loudspeaker membrane. For this rea-
son, the loudspeakers should be transported and stored in a safe, careful, dry and largely dust-free manner.
The following accessory parts for transport and storage are available from Voice-Acoustic:
■Carrying bag for 1 x VENIA-6 (Art.-Nr. 504602000)
■Heavy-duty ightcase for up to two 2 x VENIA-6 (Art.-Nr. 504603000)
Note: The original packaging is unsuitable as permanent storage and transport packaging!
Warranty
The warranty period is 24 months from date of delivery.
On our choice we will eliminate any lack of conformity with repair or with replacement of the faulty goods. The
place of performance for warranty services is Voice-Acoustic headquarters in Dörverden. In case of remedy of
defects, the buyer shall bear all costs resulting from transportation of the goods to Voice-Acoustic headquarters
in Dörverden.
The ordering party is not entitled to remedy the defect by itself or to organise a replacement and to charge
such activities to Voice-Acoustic. In case of self remedy by the ordering party the warranty given by Voice-
Acoustic becomes void.
Warranty doesn’t apply to parts of wear and tear, such as threaded points, Camlock connectors and
the SpeakON®connectors.
Introduction

Page 5 of 13Manual VENIA-6 - 2021-11 EN
Introduction
Components
1. 20 x M10 mounting points with internal steel brackets
2. 15 and 12 mm multiplex cabinet, Surface with moisture resistant polyurea coating
3. 6 x M10 mounting point for U-bracket
4. Recessed grip on the underside
5. Dual-Tilt socket 0° and 5°
6. 4 x rubber feet on the underside
7. 1“ Neodym compression driver with 1,75“ voice coil
8. 6,5“ Neodym woofer with 1,8“ voice coil
9. Front grille 1 mm with 5 mm acoustic foam
10. Easyy ying track for vertical suspension
11. Safety point for safety rope with Single-Stud
12. M6 threaded points for mounting a wall or ceiling bracket
13. Threaded points in the back wall for mounting bracket handle
14. Connector panel with two SpeakON® connectors
15. M6 threaded points for mounting a wall or ceiling bracket
16. M10 threaded point in the rear wall
17. Type plate with serial number
4
5
6
7
8
9
10
1
2
3
11
12
13
14
15
16
17

Page 6 of 13Manual VENIA-6 - 2021-11 EN
Introduction
Technical data
Components 4 x 6,5“ Neodym woofer with 1,8“ voice coil
3 x 1“ Neodym compression driver with 1,75“ voice coil
Frequency response 48 Hz - 19 kHz (- 10 dB)
80 Hz - 19,5 kHz (+/- 3 dB)
Coverage range (h x v) 100° x 0°/ -20°
Powerhandling 800 W AES / 1.600 W program / 3.200 W peak at 8 Ω
Sound pressure 128 dB SPL AES / 131 dB SPL program / 134 dB SPL peak
Dimensions / Weight 1.050 (h) x 213 (w) x 390 (d) mm / 27,9 kg
Finish Polyurea coating in RAL 9005
Connections
The speaker has two loop-through Neutrik NL4 SpeakON®IN/OUT connectors. They use the 1+/1- connection
pins. Additional loudspeakers can be looped through via the second connector.

Page 7 of 13Manual VENIA-6 - 2021-11 EN
Setup
The VENIA-6 loudspeaker is designed for vertical operation. A variety of accessories is available from Voice-
Acoustic to securely attach the loudspeaker safely on tripods, distance rods or hanging it from on trusses,
ceilings and walls. Ensure that the loudspeakers are securely attached to prevent personal injury and damage
of property.
Connecting cables
When connecting the cables to the loudspeaker, ensure that the polarity (+/-) and pin assignment (1/2) is
correct. Incorrect connection results in a signicant change in the loudspeaker sound characteristics and may
damage the compression driver.
The two connection sockets on the back of the loudspeaker can be used to link multiple loudspeakers on a
single amplier. Note that parallel connection reduces the total impedance (Ω) seen by the amplier. The total
impedance of loudspeakers connected in parallel must not drop below the minimum operating impedance of the
amplier.
Voice-Acoustic recommends to use the available 4 x 4 mm² Speakon cables for mobile use.
We recommend wiring the basses with at least 4 mm² in installations. The cables of the tops in installations
must be suciently dimensioned according to impedance, power and cable length.
Simplied display without consideration of loudspeaker impedances
Operation
The VENIA-6 is exclusively intended for operation with Voice-Acoustic system electronics with internal DSP cont-
roller: the HDSP power ampliers or powered by the free 800 W amplier channels of the self-powered subwoo-
fers.
When working with the Voice-Acoustic system electronics, make sure the appropriate preset has been selected
before connecting the loudspeaker to the system power amplier or self-powered subwoofer. Using the wrong
preset can damage parts of the loudspeaker.
Note: If the VENIA-6 is not operated on the intended Voice-Acoustic system electronics, the manufacturer‘s
warranty for the loudspeaker expires!
Introduction

Page 8 of 13Manual VENIA-6 - 2021-11 EN
Mounting X-Tension Kit
The X-Tension Kit can be mounted on any subwoofer or steel base
plate with M20 threaded mounting.
1. To connect the X-Tension Kit to the VENIA column line array,
mount the stacking adapter (A) to the bottom of the speaker.
2. Use the M10 countersunk screw (B) at the rear and two M6
countersunk screws (C) of the dual-tilt ange.
3. Place the column line array with the stacking adapter on the
X-Tension Kit and secure it with the two locking pins inside the
X-Tension Kit.
Note: Make sure that both locking pins are engaged to prevent
the column line array from tipping down.
Headstacking ying equipment mounting
The headstacking ying equipment allows the installation of two
VENIA column line arrays connected at the top using the EasyFly
mechanism, ring eyes and self-lock hooks.
1. Rotate a column line array 180°.
2. Mount the headstacking ying equipment to the bottom of
the rotated column line array using the four M10 countersunk
screws (D) on the sides.
3. Place the rotated column line array on top of the other column
line array so that they sit ush head to head.
4. Connect the column line arrays using the four headstacking
connectors (E). Again, use the M10 countersunk screws on the
sides of the column line arrays.
Note: Please note that the column line arrays only have rub-
ber feet on the underside. To avoid damaging the housing, you
should use underlays when mounting.
Working with VENIA-6
A
B
D
E
C

Page 9 of 13Manual VENIA-6 - 2021-11 EN
Mounting the U-bracket
1. Remove the M10 countersunk screws on both sides of the co-
lumn line array.
2. Use the supplied M10 hexagon head screws (A) including pla-
stic washers to mount the U-bracket.
3. To protect the coatings, place the plastic washers between the
hex bolt, U-bracket and the column line array.
Mounting the C-bracket
1. On the top and bottom of the column line array, remove the
two M10 countersunk screws in the rear area.
2. Use the supplied M10 hexagon head screws (B) including pla-
stic washers to mount the C-bracket.
3. To protect the coatings, place the plastic washers between the
hex bolt, C-bracket and the column line array.
Mounting the tilting and swivelling wall brackets
1. When mounting the bracket to the wall, follow the manufactu-
rer‘s operating instructions.
2. Remove the swivel bracket on the wall bracket.
3. Use two M6 x 15 mm threaded screws and washers to x the
swivel bracket to the two M6 threaded points (C) on the rear of
the loudspeaker.
4. Hang the swivel bracket (with mounted speaker) into the bra-
cket attached to the wall.
5. Screw parts together using the lower carriage bolt, washer and
lock nut.
6. Adjust and x the tilt.
Working with VENIA-6
A
B
C

Page 10 of 13Manual VENIA-6 - 2021-11 EN
Easyy mechanics
Tool-less ight mechanism for clicking in and exact alignment of the
loudspeaker in the horizontal and vertical axis.
1. Pull the two locking bolts (A) upwards and let them engage by
turning them slightly.
2. Insert the Easyy mechanics into the ying track (B).
3. Slide the mechanics backwards as far as it will go.
4. Let the two locking bolts snap into the intended holes on the
ying track.
Note: Notice that the two locking pins (A) are engaged to pre-
vent the Easyy-Mechanics from slipping out.
Installations with Easyy mechanics
Installation with self-lock clamp (C) on trusses.
1. Mount the self-lock clamp to the Easyy mechanics using an
M10 threaded screw and lock nut.
2. Hang the clamp and holder into the mechanics using ball lock
bolts.
3. Hang the loudspeaker into the truss.
4. Adjust the inclination by xing the holder on the top hole rail
with the ball locking pin.
Installation with universal suspension arrangement for ight mecha-
nics (D) on high ceilings
1. Mount the universal suspension arrangement for ight mecha-
nics with an M10 threaded screw and lock nut to the mounting
of the Easyy mechanics.
2. Hang the suspension device and holder into the mechanics
using ball locking bolts.
3. Hang the loudspeaker into the installed chains.
4. Adjust the inclination by xing the holder on the top hole rail
with the ball locking pin.
Note: The inclination depends on the hole in which you x the
Easyy mount on the hole rail!
Working with VENIA-6
C
D
A
B

Page 11 of 13Manual VENIA-6 - 2021-11 EN
Working with VENIA-6
Overview Accessories
Universal suspension arrangement for ight mechanics (Art.-Nr. 409992001)
Self lock clamp for pipe 48-51mm, 30mm wide, max. 250 kg (Art.-Nr. 999950731)
Easyy mechanics (Art.-Nr. 409991001)
Carrying bag for up to two Easyy mechanisms with accessories (Art.-Nr. 409992000)
Multifunctional rotating ceiling bracket (Art.-Nr. 409998001)
Carrying bag for 1 x VENIA-6 (Art.-Nr. 504602000)
X-Tension Kit for VENIA-6 (Art.-Nr. 504607000)
Headstacking ying equipment for VENIA-6 (Art.-Nr. 404607001)
Headstacking connector for VENIA series (Art.-Nr. 409999001)
Aluminum bracket handle (Art.-Nr. 999995651)
Heavy-duty ightcase for up to two VENIA-6 (Art.-Nr. 504603000)
C-bracket for VENIA-6 (Art.-Nr. 404603000)
U-bracket for VENIA-6 (Art.-Nr. 404601000)

Page 12 of 13Manual VENIA-6 - 2021-11 EN
Wall console for ight hardware (Art.-Nr. 409994901)
Wall holder with tilt and swivel orientation: 145° horizontal, 30° vertical (Art.-Nr. 999924173)
Wall bracket, max. 50 kg, slewable and 22° tiltable (Art.-Nr. 999924120)
Wall- and truss holder, max. 50 kg, slewable (Art.-Nr. 999924150)
Safety 6/1000 mm (Art.-Nr. 999963100)
M10 x 40 mm eyebolt (Art.-Nr. 999917370)
Single stud tting (Art.-Nr. 999957450)
Wall bracket, slewable and 30° tiltable (Art.-Nr. 999924481)
Wall bracket, slewable and 30° tiltable, white (Art.-Nr. 999224481)
Wall mount with extension (Art.-Nr. 409994031)
Wall mount with extension, white (Art.-Nr. 409994032)
Working with VENIA-6

Page 13 of 13Manual VENIA-6 - 2021-11 EN
Manufacturer‘s declaration
Imprint
© SRV Licht- & Tonanlagen, all rights reserved.
All specications in this manual are based on information available
at the time of publishing for the features and safety guidelines of
the described products. Technical specications, measurements,
weights and properties are not guaranteed.
The manufacturer reserves the right to make technical modications
according to legal regulations stipulating the continual improvement
of product features. For the safe operation of the unit, this manual
and all other required information must be available to all users at
the time of assembly and disassembly of the unit, and during opera-
tion. Assemble or operate the unit only after reading and understan-
ding this manual, and keeping it at hand at all times at the site.
We are happy to receive your suggestions and proposals for the
enhancement of this manual.
Please send us your ideas to the following address:
SRV Licht- & Tonanlagen - Voice-Acoustic Headquarters
Brocksfeld 3
D-27313 Dörverden
Tel.: + 49 (0) 4234 942 777
E-Mail: [email protected]