Vola Sound of Harmony User manual

Sound of Harmony The maximum bear weight of this product is 5kg. Don’t place any item
more than 5kg on top of the speaker-table. The table is not intended to
be used as a seat, no matter if you're an adult or a child.
Please use the original A/C adapter for charging. Other adapters might
not work with Sound of Harmony, or in extreme cases cause accidents.
Thank you for choosing Vola!
We hope you like your Sound of Harmony as much as we do. The whole
Vola team wishes you lots of homey atmosphere with your new Vola!
Warning!
What’s in the box
Main body 3x legs
Power Cable AC Power adapter
3x EVA PAD spare parts
(if required) 3,5mm AUX cable
Assembly steps
1. Open the box, and place the speaker on a at surface with the screw
holes upwards.
2. Take a wood leg and insert it into one of the holes.
3. Rotate the wooden leg clockwise until properly fastened.
4. Repeat for remaining legs.
5. Turn the speaker around.
POWER ON:
Connect the power supply. You will hear a voice prompt, when the speaker
turns on.
BLUETOOTH:
Choose the device from the device’s bluetooth settings. When the speaker is
in pairing mode a blue light will be ashing. When connected the light will
always stay lit. The optimal distance between device and speaker is ≤10 m.
DISCONNECT BLUETOOTH:
Switch o the bluetooth connection from the device, or long press the
Play/Pause button
POWER OFF: Press the power button.
AUX CONNECTION:
By inserting a AUX cable into the AUX socket at the rear panel of the
speaker, the device will automatically switch to AUX mode, indicated by a
blue and green LED light. Bluetooth mode will be switched back on when
you remove the AUX cable.
Instructions
User Manual

Sound of Harmony
1. Power
2. Play/Pause/Phone
3. Volume -
4. Volume +
5. Mic
6. LED
7. USB ports
8. Charging LED light
9. DC IN (Power socket)
10. AUX
11. Reset
12. Wireless charging dock
When you receive a call while your phone is connected to the speaker,
you will hear a voice prompt “cell phone rings”. Press the play/pause
button to answer the call. Speak towards the speaker and you will be
heard loud and clear. Press play/pause again to hang up call.
Doublepress the play/pause button to call the last number on record.
You can charge up to two devices by connecting a cable to the
USB-ports on the rear side of the table. The charging begins automati-
cally when the Sound of Harmony is connected with a A/C cable, or
when the power is turned on.
Place your phone or other device that supports Qi-charging on the
charging mark on top of the table. The charging automatically starts
when the table is connected with the A/C cable. You will see a charging
indicator on the phone or hear a sound from the speaker.
Phone calls
USB charging
Wireless charging