Volvo XC 70 User manual

QUICK GUIDE
WEB EDITION

BLIS*
Start/Stop*
Pedestrian Detection*
02 Driver support systems
03 Your driving environment
Remote key
Keyless drive
Starting and switching off the engine
Parking brake
Wipers
01 Starting and driving
Moonroof*
Power tailgate*
Adjusting the seats
Adjusting the steering wheel
WELCOME TO THE GLOBAL FAMILY OF VOLVO OWNERS!
This Quick Guide provides a brief overview of the most common features and functions in your Volvo.
The Owner’s Manual and the other driver’s information provided contain important warnings and other
information not included in this guide.
The following symbols indicate:
Specific call-outs in a general illustration.
Step-by-step instructions.
Important information that should be read in the Owner’s Manual.
Important information, warnings and safety-related instructions marked by these symbols can be
found on the last page of this guide.
An asterisk (*) indicates optional equipment.
For additional information, contact Customer Service:
U.S.A.: 1-800-458-1552 www.volvocars.com/us
Canada: 1-800-663-8255 www.volvocars.com/ca
Climate controls
Lighting controls
Instrument panel
Infotainment system
Bluetooth hands-free
Instrument panel themes
Engine Remote Start*
External audio devices
Volvo Navigation System*
Menu settings
Setting the clock
Refueling
Vehicle care
Storage compartments
AUX/USB and 12-volt sockets
04 Functions in your vehicle
05 Tips

How does the remote key work?
What do the lights in the remote key (PCC*
only) indicate?
01
01
Green light: the vehicle is locked.
Yellow light: the vehicle is unlocked.
Red light: the alarm has been triggered.
Alternatively flashing red lights: the alarm was trig-
gered less than 5 minutes ago.
Unlocks the doors and the tailgate and disarms the
alarm. This setting can be changed in MY CAR.
Locks the doors and the tailgate and arms the alarm.
Approach lighting.
Press once to unlock the tailgate only, press and
hold to open the power tailgate*.
Information about the vehicle (Personal Car Com-
municator (PCC*) only).
“Panic” alarm: Press and hold to sound the alarm.
Turn off the alarm with the unlock button.
The remote key can store the positions of the
power seat* and door mirrors.
How does keyless drive* work?
A keyless drive remote key must be in your possession.
Locking and arming the alarm
–Press the pressure-sensitive area on any of the outside
door handles or the rubber-covered button next to the
tailgate opening control.
Unlocking and disarming the alarm
–Pull a door handle to unlock and open the door or
press the tailgate opening control.
01
See the additional information on the last page of
this guide.

How do I switch off the engine?
Park the vehicle and briefly press the START/STOP
ENGINE button to switch off the engine.
Pull the remote key out of the ignition slot.
01
How do I set/release the parking brake? 01
Setting
Press firmly on the brake pedal.
Press the PUSH LOCK/PULL RELEASE control:
the symbol in the instrument panel flashes while the
parking brake is being applied and glows steadily
when it has been fully applied.
Release the brake pedal.
Releasing
Press firmly on the brake pedal.
Pull the PUSH LOCK/PULL RELEASE control.
How do I start the engine?
Holding the end of the remote key with the base of
the key blade, insert the remote key into the ignition
slot and press it in as far as possible.
Press the brake pedal.
Press the START/STOP ENGINE button briefly and
release it to start the engine.
01
See the additional information on the last page of
this guide.

02
Blind Spot Information System (BLIS) indicates the
presence of a passing vehicle in the door mirror’s blind
area.
– BLIS is activated when the engine is started and can
be deactivated/reactivated by pressing the button.
What does BLIS* do?
How do I start the windshield/tailgate wipers
and rain sensor*?
Press the lever down to start the windshield wipers or up
for the single-sweep function.
Rain sensor On/Off.
Turn to adjust the rain sensor sensitivity or interval
wiper speed.
Tailgate wiper – interval/normal.
01
How do I use the Start/Stop function*? 02
See the warning on the last page of this guide.
Stopping the engine
Press and hold the brake pedal until the vehicle stops.
Starting the engine
Release the brake pedal.
The indicator light in the button indicates that the function
is active.

Opening
–Press the rubber-covered button under the outer
handle on the tailgate or by pressing and holding the
button on the lighting panel until the tailgate begins
to open.
Closing
–Press the button on the tailgate
The tailgate can also be opened/closed manually.
How does the power tailgate* work? 03
How does the moonroof* work? 03
How does Pedestrian Detection* work?
The optional Pedestrian and Cyclist Detection with
Full Auto Brake system has a feature that helps detect
pedestrians and applies the brakes to help slow or stop
the vehicle.
This feature is designed to be a supplementary driving aid
and cannot detect pedestrians in all situations. It is not
intended to replace the driver’s attention and judgement.
02
Understanding this feature is essential, see your
Owner’s Manual for more information. See also the
warning on the last page of this guide.
See the warning on the last page of this guide.
Automatic complete open.
Manual open.
Manual close.
Automatic complete close.
Open to the ventilation position.
Close from the ventilation position.

How do I adjust the steering wheel?
Release the steering wheel.
Adjust up/down/fore/aft.
Lock the steering wheel in position.
03
How do I adjust the seat?
Raise/lower the front edge of the seat cushion.
Raise/lower the seat.
Move the seat forward/rearward.
Tilt the backrest.
Memory button (M).
Buttons for storing seat positions.
Programming the power seat’s* memory
Adjust the seat to the desired position.
Press and hold down the M (memory) button (5).
With the M button depressed, briefly press one of the
buttons (6) to store the current seat position.
03
See the warning on the last page of this guide.
See the warning on the last page of this guide.

How does the AUTO headlight feature work? 04
How do I defrost the windshield? 04
Press to activate electrical heating*; the symbol (1)
illuminates in the display.
Press again to also direct airflow toward the winds-
hield and front side windows; symbols (1) and (2) will
illuminate.
Press again to switch off both functions; no symbols
will be illuminated.
Models without electrical defrosting: Press to direct
airflow toward the windshield and front side windows.
With the switch in the AUTO position:
• The headlights will switch automatically between
daytime running lights and low beam headlights,
depending on ambient lighting conditions.
• High beams can be used.
• Active Bending lights* (ABL) switch between high
and low beams automatically if another vehicle ap-
proaches or is directly ahead.
• Tunnel detection* is also active.
How do I set the temperature? 04
Turn the controls to set the temperatures on the
driver and passenger sides respectively. The selected
temperature is shown in the display.
Press AUTO to automatically regulate cooling,
heating, blower speed, recirculation, and air distribu-
tion to maintain the chosen temperature. AUTO
CLIMATE is displayed.

How do I reset the trip odometers? 04
Turn the left side steering wheel thumb wheel to
scroll to the desired trip odometer (T1 or T2).
Press and hold RESET to reset.
How do I operate the trip computer?
OK opens the trip computer menus, activates a
selection or erases displayed messages.
Use the thumb wheel to scroll among the menu
selections.
RESET resets the trip computer functions and exits
the menus.
04
What does the trip computer’s “Distance to
empty” indicate? 04
This is the approximate distance that can be driven on the
remaining fuel based on average fuel consumption during
the last 20 miles (30 km) of driving (digital* instrument
panel shown).
When “...distance to empty” is displayed (analog instru-
ment panel), or “---” (digital* instrument panel), refuel as
soon as possible.
See your Owner’s Manual for information about the
analog instrument panel. See also the information
on the last page of this guide.

How do I navigate in the infotainment
system?
Press RADIO, MEDIA, MY CAR, NAV* or TEL on
the center console to select a mode.
Press OK/MENU or the thumb wheel on the ste-
ering wheel to display the mode’s main view.
Turn TUNE or the thumb wheel to navigate in the
menus.
Press OK/MENU or the thumb wheel to make a
selection.
Press EXIT briefly to go back in the menu system,
cancel a function or erase characters.
Press and hold EXIT to return to the mode’s main
view. From a mode’s main view, press and hold EXIT
to go to the infotainment system’s main view.
Tip:
To display the shortcut menu while in the NAV or TEL
modes, press NAV or TEL. Press again to return to the
mode’s main view.
04
How do I switch the infotainment system on
and off?
Press the power button briefly to switch the system
on.
Press and hold the button (until the screen turns
black) to switch off.
With the system on, press the button briefly to mute/
unmute the sound.
04
Keep in mind that the entire Infotainment system, inclu-
ding telephone and navigation* functions, are switched on
and off at the same time.