Vortex TAB 60 User manual

Main Features:
1. Cherry MX switches inside
2. Arbitrary programming key-code and LED colors (Backlit only)
3. Build in 3 layers for programming
4. PBT DSA profile keycaps with Dye-Sublimated technology
5. Detachable USB-C cable
6. Bluetooth 3.0
7. Support hardware programming in Bluetooth mode
8. Support connecting 4 Bluetooth devices simultaneously.
9. Support Vortexgear MPC online key-code editor
Package Content:
1. Keyboard x 1
2. USB-C Cable x 1
3. Extra Mac & RGBY modifiers keycap

1. Switch O.S:
a. Windows: Pn + Q
b. Mac: Pn + W
Windows interchangeable with Alt
F1~F12 please refer to the mac keyboard layout
F3 and F4 need to set their own
c. Linux: Pn + E
Caps lock interchangeable with L_Ctrl
2. Switch Keyboard Layout:
Pn + R+Shift switch(Cycle) - QWERTY/DVORAK/COLEMAK
3. Spacebar LEDs instructions:
a. Left side LED –Switching Layers (Pn + N, M, <, >)
Red - Layer 1
Green - Layer 2
Blue - Layer 3
None - Default
b. Right side LED –Switching layout and Windows lock
Red - COLEMAK
Green - DVORAK
Blue –Windows lock None –QWERTY (Default)

4. Other functions:
a. Reset the current layer key-codes: Pn + R
b. Reset all layers’ key-codes and restore to default: L_Alt + R_Alt
c. Swap Fn or Pn position:
Hit Fn + L_Shift for 3 seconds then select new Fn key directly
Hit Pn + L_Shift for 3 seconds then select new Pn key directly

Fn + Control keys
Remark
Fn
+
1
=
F1
2
F2
3
F3
4
F4
5
F5
6
F6
7
F7
8
F8
9
F9
0
F10
_-
F11
+=
F12
I
↑
J
←
K
↓
L
→
P
PrtSc
{[
ScrLk
}]
Pause
Z
APP
H
Home
N
End
U
PgUp
O
PgDn
Backspace
Delete
:;
Ins
“’
Del
T
Delay 15ms
Only on Macro mode
G
Delay 0.1s
B
Delay 0.5s
L_Shift
Swap Fn

Pn + function key
Remark
Pn
+
ESC
=
Palette
1
Single Red Color
Seven levels of brightness
2
Single Green Color
Seven levels of brightness
3
Single Blue Color
Seven levels of brightness
4
LED mode 1
Single key backlit
5
LED mode 2
Full keys backlit
9
custom mode 1
Customize single key backlit
0
custom mode 2
Customize full key backlit
_-
CM1
Display Custom mode 1
=+
CM2
Display Custom mode 2
L_Alt
Bluetooth paring
Hit around 3 sec.then Capslock
starts flashing
J
Bluetooth device
Connect BT device
K
L
;
Tab
USB
Swap USB or Bluetooth
|\
Bluetooth
N
Default
Switch Layer
M
Layer 1
<
Layer 2
>
Layer 3
R
Reset current layer
Left Spacebar LED flashing in
white color
L_Ctrl
Enter to Macro mode
Green LED on Capslock
R_Shift
Change layout
QWERTY/DVORAK/COLEMAK
L_Shift
Swap Pn
L_Windows
Windows lock
Right Spacebar LED change to
Blue color
↑
RGB lighting +
←
RGB lighting speed -
↓
RGB lighting -
→
RGB lighting speed +

Bluetooth Pairing Guide
The following procedure details how to pair with your device.
1. To put your keyboard in pair mode, slide the power switch on (Back of case)
2. Activate Bluetooth on your device and set it to search for new devices.
3. Press Pn + L_Alt for 3 seconds to enter the Bluetooth pairing mode, the
Bluetooth LED indicator (on Capslock) will flashing then hit Pn + one of J, K, L, ;
to pair the device.
4. Locate the list of Bluetooth devices in the interface of the device. After
selecting "Vortexgear" from it, the Bluetooth indicator is off and the pairing is
completed.
5. To pair second device or to re-pair to the original device:
Same as Step 2 and 3
Remark:
1. Please use AAA battery x 2。
2. The Bluetooth indicator will flash Green quickly when switching groups
3. Low voltage shows a Red light
4. The USB mode is automatically switched when the USB is powered on.