Vortex RGB POK3R User manual

Features:
1.ANSIlayoutwith61keys
2.CheryMXswitches
3.On-boardmacro(3layers)andRGBlightingeffectsetting
4.Build-in3layouts(Qwerty,Dvoark,Colemak)
5.Metalcase
6.USB-C
7.SupportfirmwareupdateonMacO.S
THE NEW
ThenewRGBPOK3Ristheperfectsolutionforlimiteddesk
space.Choosebetween3differentkeyboardlayouts,with
additionalfeaturessuchasindividuallyprogrammablekeys
with3differentcustomizablelayeroptions,changedto
USB-Cconnectwhichismorefriendlytoplug-inwhenyou
useit.Alleasilysetthroughwhatyouwant.
Fn function description table
(LED1ongreenlight)
(LED1onredlight)
(LED1onbluelight)
Keyboard Default layout
LED1 LED2
Pn function description table
1. Keyboard x 1
2. USB-C able x 1
3. Manual x 1
Model name
Number of keys
Switch type
Cable
Cable length
Backlit
Weight
Dimensions (LxWxH)
Warranty
RGB POK3R
61 or 62
Cherry MX
Detachable with USB-C
1.5m
RGB
1 year
291 x 103 x 37
770 10g
Packing contect
Product specification
5 mm

1.SupportFnlayerprogramming,Fncompoundkey(for
exampleFn+A)canbeprogrammedinkeyselectionstate.
2.Supportdelayoutput.Inthestateofkeyselection(step3),
Fn+T,Fn+G,Fn+B,thecontinuousdelayonlycountsone
timebutthetimeaccumulates.
Example:
Programtoenter“OK”whenQispressed.Insertaninterval
of1.2secondsbetweenOandK.
Press“O”andhitFn+B2times(0.5sx2=1s)andFn+Gx2
time(0.1sx2=0.2s)
3.Eachkeycaninputupto31key-code.
4.Inprogrammingmode,ifyoudonotpressanykeyswithin
15seconds,itwillautomaticallyexit.
Fn+Tdelays15ms
Fn+Gdelays0.1s
Fn+Bdelays0.5s
Hit“O” Hit“K”
or or or
Default Layer2 Layer3 Layer4
1.Nolight:Default
2.Redlight:Layer1
3.Greenlight:Layer2
4.Bluelight:Layer3
Step1:Selectalayer(Fn+"<",">"or"?"key).
Step2:PressFn+rightCtrltoentertheprogrammingmode
(theLED2issteadylight)
Step3:Hitthekeyyouwanttoprogram(theLED2flashes)
Step4:TypethecontentthenhitPnkey(theLED2lighton
constantly)
Step5:RepeatStep3andStep4toprogramotherkeys.
Step6:PressFn+rightCtrlkeytoexittheprogramming
mode(theLEDontherightsideofspacebargoesout)
Note:
Thekeyboardhas4built-inlayers.Thedefaultlayercannot
beprogrammed.

Fn+rightCtrl/M/</>and?disable.
2.Returntofactorydefault:
a.Clearingindividuallayers:
b.Clearingalllayers:
Remarks:
IfyouhavechangedtheFnpositionandforgotwhereitwas.
YoucanstillpresstheoriginalFnandRkeytorestorethe
currentlayer.
PleaseholddowntwoAltkeysatthesametimeuntilthe
LED1stopsflashing.
PleaseholddownFnandRkeyatthesametimeuntilthe
LED1stopsflashing.
Dip switch description table
Macroinstruction: Remarks:
HowtochangethepositionofFnorPn.Fnasan
example:
Step1:TurnontheDIPswitch4
Step2:SelectaLayer
Step3:PressFnandthenselectthenewlocationyou
want
Step4:ClosetheDIPswitch4completethechange
ChangePnpositionasabovesteps
Remarks:
Press Release Press
1.Independentarrowkeys
PressingtherightAltandthespacebaronetime,itwill
changetherightShift,Fn,PnandrightCtrlintoarrowkeys.
Backtodefaultfunction,pleasehititagain.
*Pleaserefertotheillustrationbelow.
Otherfunctionsdescription:
3layerscaneditRGBlightingeffectsandeachlayer
caneditsingle-keybacklightorentirecolumn
backlight.
Step1.Selectalayerwhosecoloryouwanttoedit(Fn
+<,>or?Key)
Step2.PressPn+9or0toentertheeditmode.
Step3.PressPn+1,2,3tomixcolorsbyyourselfor
pressPn+ESCtoopenthecolorpalette,andselecta
colortochangedirectly
note:
Ifyouchoosetomixthecoloryourself,thecolorwill
bedisplayedonthePnkey
Step4.PressPn+9or0againtoexittheeditmode
Step5.PressPn+"-"or"="todisplaythesetcustom
color.
RGBLEDeditinginstructions: