VTC Pro Audio V22 YS2020 User manual
www.vtcproaudio.com
Service Manual
V22
MODEL TYPE:YS2020
U.S.A.
Yorkville Sound Inc.
4625 Witmer Industrial Estate
Niagara Falls, New York
14305 USA
Voice: (716) 297-2920
Fax: (716) 297-3689
CANADA
Yorkville Sound
550 Granite Court
Pickering, Ontario
L1W-3Y8 CANADA
Voice: (905) 837-8481
Fax: (905) 837-8746
Power
V22
POWER AMPLIFIER
Protect
Power
-
00 0
-
00 0
-
21
-
30
-
15
-
18
-
6
-
12
-
9
-
3
dB
-
00 0
-
00 0
-
21
-
30
-
15
-
18
-
6
-
12
-
9
-
3
dB
Clip
Signal
Channel A
Clip
Signal
Channel B
Protect
Power
The exclamation point within an equilatereal triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Le point d’exclamation à l’intérieur d’un triangle équilatéral
est prévu pour alerter l’utilisateur de la présence
d’instructions importantes dans la littérature accompag-
nant l’appareil en ce qui concerne l’opération et la
maintenance de cet appareil.
This lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user to
the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
Ce symbole d’éclair avec tête de flèche dans un triangle
équilatéral est prévu pour alerter l’utilisateur de la présence d’un
« voltage dangereux » non-isolé à proximité de l’enceinte du
produit qui pourrait être d’ampleur suffisante pour présenter
un risque de choque électrique.
IMPORTANT SAFETY INSTRUCTIONS
safety-4v8 • April 14/2011
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
THIS DEVICE IS FOR INDOOR USE ONLY!
FOLLOW ALL INSTRUCTIONS SUIVEZ TOUTES LES INSTRUCTIONS
Instructions pertaining to a risk of fire,
electric shock, or injury to a person
Read Instructions: The Owner’s Manual should be read and understood before operation
of your unit. Please, save these instructions for future reference and heed all warnings.
Clean only with dry cloth.
Packaging: Keep the box and packaging materials, in case the unit needs to be
returned for service.
Warning: To reduce the risk or fire or electric shock, do not expose this apparatus to rain or
moisture. Do not use this apparatus near water!
Warning: When using electric products, basic precautions should always be followed,
including the following:
Power Sources
Your unit should be connected to a power source only of the voltage specified in the
owners manual or as marked on the unit.This unit has a polarized plug. Do not use
with an extension cord or receptacle unless the plug can be fully inserted. Precau-
tions should be taken so that the grounding scheme on the unit is not defeated. An
apparatus with CLASS I construction shall be connected to a Mains socket outlet with
a protective earthing ground. Where the MAINS plug or an appliance coupler is used
as the disconnect device, the disconnect device shall remain readily operable.
Hazards
Do not place this product on an unstable cart, stand, tripod, bracket or table. The
product may fall, causing serious personal injury and serious damage to the product.
Use only with cart, stand, tripod, bracket, or table recommended by the manufacturer
or sold with the product. Follow the manufacturer’s instructions when installing the
product and use mounting accessories recommended by the manufacturer. Only use
attachments/accessories specified by the manufacturer
Note: Prolonged use of headphones at a high volume may cause
health damage on your ears.
The apparatus should not be exposed to dripping or splashing water; no objects
filled with liquids should be placed on the apparatus.
Terminals marked with the “lightning bolt” are hazardous live; the external wiring
connected to these terminals require installation by an instructed person or the use of
ready made leads or cords.
Ensure that proper ventilation is provided around the appliance. Do not install near
any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
Power Cord
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet. The AC supply cord should be routed so that it is unlikely that it will be
damaged. Protect the power cord from being walked on or pinched particularly at plugs. If
the AC supply cord is damaged DO NOT OPERATE THE UNIT. To completely disconnect
this apparatus from the AC Mains, disconnect the power supply cord plug from the AC
receptacle.The mains plug of the power supply cord shall remain readily operable.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Service
The unit should be serviced only by qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
AVIS: AFIN DE REDUIRE LES RISQUE DE CHOC ELECTRIQUE,
N’ENLEVEZ PAS LE COUVERT (OU LE PANNEAU ARRIERE)
NE CONTIENT AUCUNE PIECE REPARABLE PAR L’UTILISATEUR.
CONSULTEZ UN TECHNICIEN QUALIFIE POUR L’ENTRETIENT
CE PRODUIT EST POUR L’USAGE À L’INTÉREUR SEULEMENT
Instructions relatives au risque de feu,
choc électrique, ou blessures aux personnes
Veuillez Lire le Manuel: Il contient des informations qui devraient êtres comprises avant
l’opération de votre appareil. Conservez. Gardez S.V.P. ces instructions pour consultations
ultérieures et observez tous les avertissements.
Nettoyez seulement avec le tissu sec.
Emballage: Conservez la boite au cas ou l’appareil devait être retourner pour réparation.
Avertissement: Pour réduire le risque de feu ou la décharge électrique, n'exposez pas
cet appareil à la pluie ou à l'humidité. N’utilisez pas cet appareil près de l’eau!
Attention: Lors de l’utilisation de produits électrique, assurez-vous d’adhérer à des
précautions de bases incluant celle qui suivent:
Alimentation
L’appareil ne doit être branché qu’à une source d’alimentation correspondant au
voltage spécifié dans le manuel ou tel qu’indiqué sur l’appareil. Cet appareil est équipé
d’une prise d’alimentation polarisée. Ne pas utiliser cet appareil avec un cordon de
raccordement à moins qu’il soit possible d’insérer complètement les trois lames. Des
précautions doivent êtres prises afin d’eviter que le système de mise à la terre de
l’appareil ne soit désengagé. Un appareil construit selon les normes de CLASS I
devrait être raccordé à une prise murale d’alimentation avec connexion intacte de mise
à la masse. Lorsqu’une prise de branchement ou un coupleur d'appareils est utilisée
comme dispositif de débranchement, ce dispositif de débranchement devra demeurer
pleinement fonctionnel avec raccordement à la masse.
Risque
Ne pas placer cet appareil sur un chariot, un support, un trépied ou une table instables.
L’appareil pourrait tomber et blesser quelqu’un ou subir des dommages importants.
Utiliser seulement un chariot, un support, un trépied ou une table recommandés par le
fabricant ou vendus avec le produit. Suivre les instructions du fabricant pour installer
l’appareil et utiliser les accessoires recommandés par le fabricant. Utilisez seulement
les attachements/accessoires indiqués par le fabricant
Note: L'utilisation prolongée des écouteurs à un volume élevé peut
avoir des conséquences néfastes sur la santé sur vos oreilles. .
Il convient de ne pas placer sur l’appareil de sources de flammes nues, telles que
des bougies allumées.
L’appeil ne doit pas être exposé à des égouttements d’eau ou des éclaboussures
et qu’aucun objet rempli de liquide tel que des vases ne doit être placé sur l’appareil.
Assurez que lappareil est fourni de la propre ventilation. Ne procédez pas à
l’installation près de source de chaleur tels que radiateurs, registre de chaleur, fours
ou autres appareils (incluant les amplificateurs) qui produisent de la chaleur.
Les dispositifs marqués d’une symbole “d’éclair” sont des parties dangereuses
au toucher et que les câblages extérieurs connectés à ces dispositifs de
connection extérieure doivent être effectivés par un opérateur formé ou en utilisant
des cordons déjà préparés.
Cordon d’Alimentation
Ne pas enlever le dispositif de sécurité sur la prise polarisée ou la prise avec tige de
mise à la masse du cordon d’alimentation. Une prise polarisée dispose de deux lames
dont une plus large que l’autre. Une prise avec tige de mise à la masse dispose de
deux lames en plus d’une troisième tige qui connecte à la masse. La lame plus large ou
la tige de mise à la masse est prévu pour votre sécurité. La prise murale est désuète si
elle n’est pas conçue pour accepter ce type de prise avec dispositif de sécurité. Dans
ce cas, contactez un électricien pour faire remplacer la prise murale. Évitez
d’endommager le cordon d’alimentation. Protégez le cordon d’alimentation. Assurez-
vous qu’on ne marche pas dessus et qu’on ne le pince pas en particulier aux prises.
N’UTILISEZ PAS L’APPAREIL si le cordon d’alimentation est endommagé. Pour
débrancher complètement cet appareil de l’alimentation CA principale, déconnectez le
cordon d’alimentation de la prise d’alimentation murale. Le cordon d’alimentation du
bloc d’alimentation de l’appareil doit demeurer pleinement fonctionnel.
Débranchez cet appareil durant les orages ou si inutilisé pendant de longues périodes.
Service
Consultez un technicien qualifié pour l’entretien de votre appareil. L'entretien est
nécessaire quand l'appareil a été endommagé de quelque façon que se soit. Par exemple
si le cordon d’alimentation ou la prise du cordon sont endommagés, si il y a eu du liquide
qui a été renversé à l’intérieur ou des objets sont tombés dans l'appareil, si l'appareil a été
exposé à la pluie ou à l'humidité, si il ne fonctionne pas normalement, ou a été échappé.
S2125A
17 17
16 16
15 15
14 14
13 13
12 12
11 11
10 10
9 9
8 8
7 7
6 6
5 5
4 4
3 3
2 2
1 1
A
A
B
B
C
C
D
D
E
E
F
F
G
G
H
H
I
I
J
J
K
K
L
L
M
M
N
N
O
O
P
P
Q
Q
R
R
S
S
T
T
U
U
V
V
Product
Date:
Filename:
PCB# ofSheet
Rev:
21
v6.00
M1129-6v00.sch2002
{Drawing Number}
Tue May 02, 2006
M1129{Title}
Product
Date:
Filename:
PCB# ofSheet
Rev:
21
v6.00
M1129-6v00.sch2002
{Drawing Number}
Tue May 02, 2006
M1129{Title}
3657_OBS
J2
J1
LINE XLR
Copper
TieHere
1/4W
.
R25
1K54
C11
220P 100V
1/4W
.
R27
1K54
C1
22N 275V
220P
C5
100V 220P
C6
100V
1/4W
R26
0.1%
9K76
1/4W
R22
0.1%
9K76
100V 220P
C7
1/4W
0.1%
9K76
R14
100V 220P
C8
1/4W
0.1%
9K76
R15
C27
150N 63V
1/4W
.
R19
56K
1/4W
.
R37
10K0
1/4W
.
R10
56K
C28
150N 63V
1/4W
R109A
4M7
4148
D4
1/4W
.
R38
10K0
3436
LIMITER
S2:B
1/4W
R109B
4M7
C39
100N 100V
U3:B
MC33078P
C23
33U 16V
Copper
TieHere
Tie-netName
C12
220P 100V
S4:B
S4:A
GND LIFT
U1:A
MC33078P
C31
68N 100V
1/4W
.
R28
56K
1/4W
.
R18
120K
C32
68N 100V
LIMITER
S2:A
FILTER SW
S1:A
C24
33U 16V
C29
150N 63V
C30
150N 63V
C14
100N 100V
1/4W
.
R11
1K54
1/4W
.
R13
1K54
8
V+
4V-
U1:C
1/4W
0.1%
9K76
R12
1/4W
0.1%
9K76
R16
1/4W
.
R9
56K
COM MR
L
MONO-STEREO-BRIDGED3705
S3:B
1/4W
RAD
R111
10R
1/4W
.
R20
120K
1/4W
R24
0.1%
9K76
C10
220P 100V
S1:B
FILTER SW
C33
68N 100V
C34
68N 100V
1/4W
R23
0.1%
9K76
C9
220P 100V
4148
D7
U3:A
MC33078P
8
V+
4V-
U4:C
8
V+
4V-
U3:C
MC33078P
U4:B
C13
100V100N
S TR
-
--
J4
S TR
-
--
J3
C15
100N 50V
COM MR
L
MONO-STEREO-BRIDGED3705
S3:D
1/4W
.
R6
33K
U4:A
MC33078P
1/8W
.
R112
10R
C16
100N 50V
W1
3570
U1:B
MC33078P
COM MR
L
3705
S3:A
MONO-STEREO-BRIDGED
13
10
7
4
1
9
11
12
8
#
2
3
5
6
VER#
MODEL(S):-
DATE DESCRIPTION OF CHANGE
V
V
V
2.10
1.00
V
V
V
V
3.00
2.20
.
2.00
D
D
D
APR/22/98
OCT/1997
N
N
N
PC#5694 ADD NETS BRPRTCT, LVGND-28 TO BRG SW
FIRST PRODUCTION
AP4020 / AP4040 / AP2020 / AM1CE
D
D
D
D
JUL/2005
SEP/06/01
DEC/02/97
NOV/12/97
N
N
N
N
CONVERT TO PCAD2002
DELETE R119
C27, C28, C29, C30 TO 150n
REVERSED INPUT POLARITY. MODIFIED FOR AP2020
M1129.sch_schematic-DATABASE_HISTORY
13
10
7
4
1
9
11
12
8
#
2
3
5
6
VER#
MODEL(S):-
DATE DESCRIPTION OF CHANGE
V
.
4.10
.
1.00
V
V
6.00
5.00
4.00
3.00
.
2.00
D
AUG-15-2005
SEP/06/01
DEC/02/97
OCT/97
N
PC#6914:ADD TARGETS
PC#6436 REPLACE R119 (10K0) WITH JUMPER X119
CHANGE C27, C29, C28, C30 TO 150N
FIRST PRODUCTION
AP2020 AP4020 AP4040 AM1CE
D
D
JUL/2005
APR/15/05
JUL/01/98
APR/16/98
.
NOV/97
N
N
CONVERT TO PCAD2002, PC#6944:ROUTE GAUGE,
PC#6873 REDO SOLDERMASK
ISOLATE PIN OF S3
PC#5694 PINS 10-12 OF MC2 CONNECTED TO BRG SWT
LSPRE AT 14 PIN CONNECTOR. INPUT TO NONINVERTING
SWITCH NETS RREF WITH LREF AND RSPRE WITH
M1129 Database History
COM MR
L
MONO-STEREO-BRIDGED3705
S3:C
VCD
CLINCH
ORIGIN LONG AXIS
SHORT AXIS
INSERT
ORIGIN
12 13 14
123
91011
456
8
7
V
T
R
AL
CL AM ARAC CMCC CR BL BC
DCDL BR
DR
BM
DM
TIP
RING
SLEEVE
TIP-SW
SL-SW
RING-SW
7
TIP
RING
SLEEVE
TIP-SW
SL-SW
RING-SW
7
LIMITER
GND LIFT
FILTER SW
LINE_IN
LINE_IN
LINE XLR
3436
3657
3436
6435
3705
3436
3417
3657
9K76
10K0
9K76
220P
120K
9K76
9K76
9K76
120K
56K
56K
150N
220P
220P
10K0
10R
68N
4M7
1K54
100N
100N
220P
1K54
100N
9K76
220P
MC33078P
10R
33U
16V
16V
33U
220P
MC33078P
4148
56K
4M7
150N
68N
4148
56K
150N
9K76
68N
MC33078P
150N
1K54
220P
100N
9K76
68N
33K
1K54
220P
14 PIN SCKT
100N
275V
22N
V+
V- LIMABLE
RIGHT
RSPOST
RSIG
LSPOST
LSPRE
RREF
AP2020 / AP4020 /
AP4040
RSPRE
LREF
M1129
LEFT V6.00
FROM POTS
BRIDGED - STEREO - MONO
R14
W4
R37
R24
C10
R18
X31
R12 X29
X26
X119
X23
R22 X43
R26
R20
R28
R10
X19
C30
X50
C5 C8
TP4
R38
X35
X10
R112
X32
C32
R109A
R11
C14
C13
W3
C6
R13
X17
C15
R15
C7
TP3
U1
R111
TP5
C23
C24
X42
X36
C9
U4
TP1
D7
R9
R109B
C29
C31
D4
R19
C28
X30
X25
X24
X27
X28
R16
X37
X20
X22
C34
LOC
BEC
U3
C27
S2
X18
J2
X33
R25
C12
C16
R23
X15
X38 X40
X11
C33
X9
R6
X34
R27
C11
X16
X13
X39
X41
X12
W1
TP2
C39
S4
C1
S3 S1
W2
J3
-
-
-
J4
-
-
-
J1
ADD WIRES IN BOARD ASSEMBLY
UP THROUGH THE BOTTOM
1 FOR XLR #3657 USE SCREW PT#8829
2 FOR M1129B VX1200/2400/J/2402
DO NOT STUFF X40 AND X41
M1129 PRODUCTION NOTES
12
9
6
3
#
13
11
10
5
4
8
7
2
1DATE
MODEL(S):- VER# DESCRIPTION OF CHANGE
D
JUL/2005 6.00
V
V
V
D
D
N
N
N
APR/15/05
SEP/06/01
JUL/01/98 4.00
4.10
5.00
AP2020 AP4020 AP4040 AM1CE
1.00
2.00
.
.
3.00
OCT/97
NOV/97
.
DEC/02/97
APR/16/98 PC#5694 PINS 10-12 OF MC2 CONNECTED TO BRG SWT
CHANGE C27, C29, C28, C30 TO 150N
LSPRE AT 14 PIN CONNECTOR. INPUT TO NONINVERTING
SWITCH NETS RREF WITH LREF AND RSPRE WITH
FIRST PRODUCTION
ISOLATE PIN OF S3
PC#6436 REPLACE R119 (10K0) WITH JUMPER X119
PC#6873 REDO SOLDERMASK
M1129 Database History
CONVERT TO PCAD2002, PC#6944:ROUTE GAUGE,
PC#6914:ADD TARGETS.AUG-15-2005
4
1
6
5
3
#
2
MODEL(S):-
PC#
*PLACE IMPLEMENTED CHANGES INTO BOARD HISTORY
PENDING CHANGE
X
X
X
X
X
X
PC
PC
PC
PC
PC
PC
M1129 PENDING CHANGES
AP2020/AP4020/AP4040/AM1CE
12
9
6
3
#
13
11
10
5
4
8
7
2
1DATE
MODEL(S):- VER# DESCRIPTION OF CHANGE
D
D
JUL/2005
DEC/02/97
V
V
3.00
.
N
N
CONVERT TO PCAD2002
C27, C28, C29, C30 TO 150n
D
D
D
D
D
APR/22/98
SEP/06/01
OCT/1997
NOV/12/97
V
V
V
V
V
2.10
2.20
1.00
2.00
N
N
N
DELETE R119
PC#5694 ADD NETS BRPRTCT, LVGND-28 TO BRG SW
N
N
REVERSED INPUT POLARITY. MODIFIED FOR AP2020
FIRST PRODUCTION
AP4020 / AP4040 / AP2020 / AM1CE
M1129.sch_schematic-DATABASE_HISTORY
5
2
#
6
3
4
1DATE
MODEL(S):- VER# DESCRIPTION OF CHANGE
DVN
D
D
D
V
V
V
N
N
N
M1129 DRILL HISTORY
APR-03-2003 V06 N
AUG-15-2005 V07 CONVERT TO PCAD2002
AP2020/AP4020/AP4040/AM1CE
17 17
16 16
15 15
14 14
13 13
12 12
11 11
10 10
9 9
8 8
7 7
6 6
5 5
4 4
3 3
2 2
1 1
A
A
B
B
C
C
D
D
E
E
F
F
G
G
H
H
I
I
J
J
K
K
L
L
M
M
N
N
O
O
P
P
Q
Q
R
R
S
S
T
T
U
U
V
V
Product
Date:
Filename:
PCB# ofSheet
Rev:
11
V11
M1130V11sch.sch2002
Thu Feb 03, 2011
M1130POWER AMP
Product
Date:
Filename:
PCB# ofSheet
Rev:
11
V11
M1130V11sch.sch2002
Thu Feb 03, 2011
M1130POWER AMP
IN
REF
1/4W
4K7
R25
MINI
1/4W
10K0
R15
MINI
1/4W
15K
R21
MINI
1/4W
47K
R31
MINI
1/4W
14K7
R60
.
5.0W
0R1
R85
.
1/4W
22R
R27
FLMP
5
W1:E 6
4
W1:D 6
2
W1:B 6
1
W1:A 6
To Pot PCB
R61
1/4W
MINI
220R
C7 100V15P
C9 200V27P 4148
D8
3682 TB4
VM-
WHT
C44 200V220P
TP8
TP4
C22 100V22N
OUT
C38 250V4N7
R50
1/4W
FLMP
1R
R79
1/8W
FLMP
249R
MR854
D34
3682 TB6
OUT +
RED
3
W1:C 6
6
W1:F 6
R28
1/4W
.
249R
R117
1/4W
MINI
470R
R32
1/4W
MINI
10K0
100V
C14
100N
8
V+
4V-
U1:C
4148
D15
4148
D13
1/4W
47K
R2
MINI
2.0W
1K8
R82
.
25V
C5
100U
1/4W
4K7
R63
MINI
50VC28
22U
4148
D27
4148
D24
4148
D23
1/4W
4K7
R56
MINI
2.0W
1K8
R74
.
R116
1/4W
MINI
4K7
TO92
BC550C
Q35
5101
TO92
2N5401
Q19
5108
1/4W
1K
R68
MINI
1/4W
1K
R70
MINI
200V
C30
10P
TO92
BC560C
Q33
5102
R8
1/4W
.
42K2
4148
D14
1/4W
75R
R98
FUSIBLE
1/4W
1K5
R105
MINI
1.0W
2K7
R86
Mini
BAV21
D38
4148
D36
1.0W
2K7
R78
Mini
4148
D30
1/4W
39R0
R91
FUSIBLE
TO92
BC550C
Q29
5101
1/4W
5K6
R102
MINI
1/4W
1K5
R103
MINI
4148
D17
U1:A
MC33078P
R11
1/4W
.
30K1
1/4W
10R
R99
FUSIBLE
160V
C40
10U
1/4W
68R
R4
.
1/4W
68R
R93
.
1/4W
10R
R101
FUSIBLE
1/4W
10R
R92
FUSIBLE
4148
D11
4148
D12
4148
D2
1/4W
249R
R37
.
1/4W
10K0
R38
MINI
1/4W
15K
R36
MINI
50VC8
1N
R39
1/8W
FLMP
249R
1/4W
2R2
R10
.
R23
1/8W
FLMP
249R
M
Lin
P1
4524
4K7
BIAS ADJ.
50V
C4 1N
1/4W
249R
R12
.
RED
D40
6405
3682 TB5
VH-
BLU
3682 TB2
VM+
YEL
3682 TB1
VH+
RED
C45 200V220P
1/4W
39R0
R33
FUSIBLE
1/4W
39R0
R29
FUSIBLE
1/4W
470R
R120
MINI
1/2W
10K
R100
.
63VC33
6800U
63VC31
6800U
4148
D10
16V
C15
330U ZD42
0W5
16V0
1N5246B
4148
D4
1N5246B
ZD41
0W5
16V0
4148
D1
R118
1/4W
MINI
15K
TO92
MPSA06
Q3
5103
1/2W
1K5
R9
.
1N5260B
ZD3
0W5
43V0
R14
1/4W
MINI
220K
1/4W
470K
R20
MINI
4148
D6
1/4W
15K
R6
MINI
100V
C42
100N
R71
1/4W
MINI
1K
R24
1/4W
RAD
7K5
1/4W
4K7
R26
MINI
R119
1/4W
MINI
220K
TO92
Q13
5113
MPSA42
1/4W
4K7
R22
MINI
C24 200V2N2
R66
1/4W
MINI
470R
1/4W
2R2
R62
.
1/4W
14K7
R52
.
TO92
BC550C
Q12
5101
1/4W
2R2
R44
.
C19 250V220N
C16 200V2N2
C25 400V1N
1N4745A 16V0
ZD451W0
1/8W
1K
R59
FLMP
R57
1/4W
.
60K4
R55
1/4W
.
17K8
1/8W
1K
R51
FLMP
R53
1/4W
.
60K4 BAV21
D20
4148
D16
R109
1/4W
FLMP
1R
1N4745A16V0
ZD44 1W0
C17 200V1N5
MR854
D26
MJ21195
Q32
6910
TO3
.
5.0W
0R1
R83
.
R87
1/4W
FUSIBLE
241R
C36 250V4N7
MJ21196
Q20
6909
TO3
.
MJ21196
Q18
6909
TO3
.
MR854
D28
MR854
D32
5.0W
0R1
R89
.
2.0W
3R9
R94
.
5.0W
0R1
R88
.
MR854
D22
3682 TB7
OUT -
BLK
1/4W
4K7
R65
MINI
1/4W
4K7
R58
MINI
50VC26
22U
4148
D25
25VC2
100U
TO92
2N5551
Q17
5107
200V
C32
10P
1/4W
2K
R80
MINI
R5
1/4W
.
6K04
1/4W
2K
R72
MINI
1/4W
39R0
R97
FUSIBLE
1/4W
75R
R84
FUSIBLE
1/4W
5K6
R106
MINI
4148
D37
BAV21
D29
4148
D39
1/4W
68R
R95
.
50VC35
22U
160V
C39
10U
1/4W
2R2
R7
.
1/4W
150R
R18
MINI
1/4W
150R
R35
MINI
1/4W
10K
R16
MINI
TO92
BC560C
Q6
5102
1/8W
220R0
R111
FLMP
R112
1/4W
MINI
470R
1/4W
470R
R121
MINI
1/4W
470R
R110
MINI
MJE350
6874
Q39
TO126
.
MJE340
6873
Q38
TO126
.
1/2W
10K
R104
.
C23
250V 220N
63VC34
6800U
63VC29
6800U
4148
D7
16V
C13
330U
C3
63V 4U7
1/4W
15K
R17
MINI
DS
MTP10N15
MTP12P10
IRL2910
MTP2P50E
IRF830
IRF4905
IRF720
G
TO-220
MTP8P20
IRF5210
MTP23P06
IRF822
63VC43
2U2
BC
TO-92
MPSA63
MPSA43
2N5551
E
MPSA56
MPSA06
MPSA13
2N5401
R43
1/4W
MINI
470R
1/4W
4K7
R64
MINI
TO92
BC560C
Q14
5102
R46
5.0W
.
1K2
BE
TO-92
BC560C
C
BC550C
TO-92
AS35
R54
1/4W
.
17K8
MJ21195
Q30
6910
TO3
.
MR854
D21
250V
C27
33N
3682 W4
ShutDown
YEL
BAV21
D19
1N4745A
ZD5
1W0
16V0
R30
1/4W
.
249R
GND
VCC
OUT
TO-92
U2
6478
.
.
AS35FN
C18
16V
33U
C20 16V33U R34
1/4W
MINI
10K0
1/4W
3K01
R107
.
U1:B
MC33078P
1/4W
17K8
R19
.
1N4745A
ZD40
1W0
16V0
100V
C12
100N
50VC10
22U
TO92
BC560C
Q31
5102
TO92
BC560C
Q4
5102
MJE340
6873
Q25
TO126
.
MJE350
6874
Q28
TO126
.
TO92
BC550C
Q1
5101
4148
D31
4148
D33
16VC41
330U
50V
C622U
MJE350
6874
Q23
TO126
.
50V
C3722U
1/4W
75R
R76
FUSIBLE
1/4W
75R
R90
FUSIBLE
TO92
BC550C
Q2
5101
2SA2121-0
TO3P
7004
Q10
1N4732A
ZD47
1W0
4V7
TO92
Q5
5101
BC550C
1/2W
1R
R113
SMALL
1/4W
3K3
R40
MINI
2N5401
Q7
5108
TO92
1/4W
30K1
R3
.
2SC5949-0
7005
TO3P
Q9
1N5240BRL
ZD46
0W5
10V0
R73
1/4W
.
39R
R69
5.0W
.
1K2
1/4W
39R0
R75
FUSIBLE
R108
1/4W
FLMP
1R
R81
1/4W
FUSIBLE
241R
MJ21195
Q36
6910
TO3
.
TO92
MPSA42
Q11
5113
4148
D18
R114
1/4W
.
249R
1/4W
220K
R42
MINI
ZD43
0W5
18V0
1N5248B
R45
1/2W
SMALL
1R
MJ21196
Q24
6909
TO3
.
MJ21196
Q22
6909
TO3
.
R48
1/4W
.
47R
R47
1/4W
MINI
1K
R96
5.0W
.
5R6
1/4W
39R0
R1
FUSIBLE
TO92
BC550C
Q8
5101
TO92
BC550C
Q26
5101
200V
C1
1N5
4148
D35
MJE340
6873
Q27
TO126
.
3696
K1:B
K1:A
3696
R13
1/4W
MINI
1K
TO92
BC560C
Q21
5102
R67
1/2W
SMALL
1R
1/4W
3K3
R41
MINI
4007
D9
B C E
MJL21194
MJL1302A
MJL3281A
MJL21193
2SA2121-0
2SC5949-0
CB
TO-126
MJE350
MJE340
BD238
MJE270
BD139
BD140
E
BD237
MJE271
MJ21195
Q34
6910
TO3
.
DS
G
P
MTP23P06
Q16
6933
TO220
.
R77
1/4W
FLMP
1R
C21 100V22N
1/4W
39R0
R49
FUSIBLE
G
D
S
IRF630NPBF
NQ15
6752
TO220
.
L13759
4UH
AP2020 / V22 /VX1200CE
BOTTOM
VIEW
E
MJE11025
B
13
10
7
4
1
9
11
12
8
#
2
3
5
6
VER#
MODEL(S):-
DATE DESCRIPTION OF CHANGE
V9.10
v9.00
8.00
6.00
5.20
V
.
9.00p0
.
7.00
6.10
.
.
2008/04/01
2007/12/07
JUL/04/02
JUN/17/02
PC#7514 - new drill, route & trace
Added routing at top and bottom of middle zippers.
CONVERT TO PCAD2002
PC#6547 ADD TEST JIG HOLE
PC#6538 Q18,Q20,Q22,Q24 #6900 ->MJ21196
AP2020
.
D
2007/11/01
.
JUN/02/05
AUG/31/04
.
.
N
Changed Q9 and Q10 patterns to correct version.
Solderability updates, changed MR854 diodes to 0.6 spacing.
PC#7083 MTP10N15L TO IRF630NPBF
PC#6844 REDO SOLDERMASK
R81,R87 249R-FLAMEPROOF ->241R FUSIBLE
ZD41, ZD42 14V->16V . C27 10n->33n
Q30,Q32,Q34,Q36 #6927->MJ21195. R120,R121 100R->470R
M1130 Database History
JUN/23/06
13
10
7
4
1
9
11
12
8
#
2
3
5
6
VER#
MODEL(S):-
DATE DESCRIPTION OF CHANGE
5.10
4.00
.
.
1.00
.
5.00
3.00
.
.
.
.
2.00
DEC/17/01
JUL/17/98
.
.
DEC/97
PC#6493 R120,R121 150R->100R
PC#5799 REPLACE TAB3 WITH AN EYELET
R109,R108,R50,R70 FLAMEPROOF TO REGULAR
R54,R55 24K9->17K8. R79,R114 220R->249R. C36,C38 22N-
FIRST PRODUCTION
AP2020 VX1200CE
SEP/06/01
.
MAR/10/98
.
.
.
.
DEC/16/97
PC#6051 Q27,Q28 HEATSINK #3896 -> #3894
PC#6434 ADD C45,C121 AT Q39. ADD C44, R120 AT Q38
PC#5641 ADD LD1
D9 4148 -> 4004 C30,C32 4P7 ->10P/200V
C43, D46. ADD TAB TO CONNECT TO OTHER AMP
->4N7. C17 680p ->1N5. C25 470p->1n . ADD R118, R119
->30K1. R52, R61 16K9->14K7. R53,R57 64K9->60K4
R21, R36 20K->15K R31 82K->47K, ZD43 20V->18V. R3 20K-
M1130 Database History
12
9
6
3
13
10
11
7
4
1
2
5
8
V
V
V
.
V
V
V
V
V
V
V
D
D
D
03-FEB-2011
N
N
N
PC8189: CHANGE #3759 EYELETS TO NORMAL GG
D
D
D
D
D
D
D
N
N
N
N
N
N
N
23-JUL-2009 V10.00 ADDED 6C XH CONN YS#2327
08-SEP-2010 V11 PC8057: MOVE TB2 AWAY FROM CAP GG
VCD
CLINCH
ORIGIN LONG AXIS
SHORT AXIS
INSERT
ORIGIN
Pcb Mech M1130 V11
ASUSED
Top Assy M1130 V11
See
Note 9
SPACER
SEE LAYOUT DOCUMENTATION
V
T
R
V
T
R
V
T
R
V
T
R
V
T
R
V
T
R
V
T
R
V
T
R
16
C2 NC
-
C1 NO
+
E
B
C
E
B
C
To Pot PCB
BIAS ADJ.
3759
6405
6874
5835
5882
5882
6933
2343
6934
6873
6934
3696
7005
6934 6752
6874
5895
6873
6934
6873
6874
5895
5895
6934
5895
7004
6934
5K6
1K
220R 1K
4148
4148
4148
4148
4148
10K0
17K8
14K7
63V
2U2
10K0
15K
1K 4148
4148 1R
22N 1R
4V7
249R
BC550CBC560C
16V0
16V0
3K01
4148
39R0
2N2
75R
4K7
4K7 2K
4148
4148
39R0
2K7
1.0W
4148 470R
1K
16V0
1K5
249R
10K0
10K0
75R
4148 15K
2K
249R4K7
BAV21 220K
4K7
470R
470R
16V0
1K5
1/2W 470R
14K7
17K8
22R2R2
39R0
1R
1/2W
470K
39R0
30K1 2R2
4K7
220K
2R2
241R
4K7
4148
2N5551
1K
68R
4K7
10R
220P
4148
4N7
25V
100U
10P
4148
4148
1K
1K5
2N5401
22U
50V
10R
160V
10U
2K7
1.0W
2N2
4UH
68R
10K
BC550C
RED
MJE350
4148
250V
33N
220N
250V
220N
250V
1N5
AS35FN
TO-92
100N
27P
BAV21
42K2
1R
1/2W
TO220
MTP23P06
33U
16V
33U
16V
BC560C
47K
249R
MPSA42
3K3
4148
330U
16V
16V0
249R
150R
50V
22U
100N
15K
BC550C
4U7
63V
4148
249R
470R
1R
1R
1N5
4K7
2N5401
1K8
2.0W
BAV21
4148
BC560C
MR854
10K
1/2W
10K
1/2W
47R
4148
4148
1N
4148
75R
5.0W
1K2
16V0
4148
15P
30K1 39R0
1N
39R
1R
1/2W
BC550C
100N
22U
50V
MJE340
MR854
60K4
249R
75R
220R0
4148
BC560C
220K
0R1
5.0W
0R1
5.0W
7K5
16V
330U
RELAY 1C
330U
16V
BC560C
1N
3K3
43V0
18V0
TO3P
2SC5949-0
2R2
241R
4148
22N
1K
4N7
15K
BC550C BC560C
MPSA06
4007 39R0
68R
4K7
15K
6K04
4K7
39R0
10R
150R
470R
MR854
10V0
249R
60K4
25V
100U
17K8
50V
22U
MC33078P
10P
160V
10U
3R9
2.0W
470R
1N
TO220
IRF630NPBF
MJE350
TO126
6800U
63V
MPSA42
22U
50V
47K
BAV21
MJE340
TO126
MR854
220P
2.0W
1K8
5.0W
5R6
BC550C BC550C
50V
22U
5K6
5.0W
1K2
MJE340
MJE350
MJ21195
Body
MJ21196Body
6800U
63V
6800U
63V
BC550C
MJ21195
Body
MJ21196
Body
Body
MJ21196
0R1
5.0W
0R1
5.0W
MR854
MJ21195Body
6800U
63V
MJ21195Body
TO3P
2SA2121-0
MJ21196
Body
MR854
V11
METAL
AP2020 / V22
M1130
METAL
/ VX1200CE
INTO WAVE
R106
R47
R61 R71
D33
TP7
D31
D36
D30
X21
TP8
D7
R38
R54
R52
C43
TP5 R15
R21
R51 D4
D18 R108
C22 X16 R50
ZD47
R79
Q1
Q4
X5 TP10
ZD40
ZD5
R107
D39
R97
C24
R98
R65
R56 R80
D2
D12
R49
X3
R78
D17 R117
R13
ZD45
R103
R30
R32 R34
R76
D15 R36
R72
R37R64
D20 R119
X26
R26
R110
R120
ZD41
X1
R9 R43
R60
R55
R27R44
R29
R113
R20
R33
R3 R10
R25
R14
R7
X22
R87
X30
R58
D25
Q17
R70 R93
X23
R116
R101
C44
X300
C36
TP2
C2 TB1
VH+
RED
C32
D24
D27
R68
R105
Q19
C35
R99
C40
X32
R86
C16
L1
TB5
VH-
BLU
R95
X8
R16
Q2
D40
Q28
D35
C27
C23
C19
C17
TP6
U2
X28
C14
C9
D29
R8
X11
X6
X4
R45
Q16
W6
.
.
7in YEL
W1
C20
C18
X13
Q21
R2
R39
TP4
Q11
R41
D16
C15
ZD42
R12
X15
R18
C6
X19
C42 X27
R118
Q12
C3
D10
R23
R66
R77
R109
C1
R22
Q7
X24
R74
TB7
OUT -
BLK
TB2
VM+
YEL
D38
D23
Q31
D32
W5
PS GND
.
BLK
R104
R100
R48
D11
D8
C11
D37
R84
H1
X9
TB6
OUT +
RED
R69
W2
.
.
YEL
ZD44
D14
C7
R11 R75
C25
R73
R67
Q29
C12
C37
Q27
D22
R53
R28
R90
R111
D13
Q33
R42
W7
.
.
7in BLU
R88R89
R24
C13
K1
C41
X12
Q6
C4
R40
ZD3
ZD43
Q9
R62
R81
D1
TP3
C21
R59
C38
X17
W4
ShutDown
YEL
R17
Q5
Q14
Q3
D9 R1
R4
P1
R6
R5
R63
R91
R92
R35
R112
D34
ZD46
R114
R57
C5
R19 TP11
C28
U1
C30
BEC
LOC
C39
R94
R121
W3
.
.
BLU
C8
Q15
Q39
X2
C31
TP1
X25
Q13
C10
R31
D19
X18
Q38
D21
H2
C45
R82
R96
Q26
Q35
C26
R102
R46
Q25
Q23
Q36
TB4
VM-
WHT
Q24
C33
C29
Q8
Q32
Q18
Q20
R85
R83
D26
Q34
C34
Q30
Q10
Q22
D28
PCB
PCB
#3846 MICA
PCB
#3797 THERMO PAD
TORQUE 4 INCH/LB
#8663 SPACER
#3501
WASHER
#3896 HEATSINK
#8800 6-32 KEPS NUT
HEATSPREADER
#8835 BOLT
HEATSPREADER
#8701 4-40 KEPS NUT
#3501 BELL WASHER
T264 DEVICE
#3915 MICA
TORQUE 4 INCH/LB
HEATSPREADER
T-220 DEVICE
#3501 BELL WASHER
TORQUE 4 INCH/LB
#3823 THERMO PAD
T126 TYPE DEVICE
#8741 4-40X 1/2" BOLT
#3501 BELL WASHER
#8871 4-40X 1/2" BOLT
#8865 4-40 SCREW
FINAL TORQUE AFTER HEATSINK HAS
MICA GREASE IS REQUIRED ON
BOTH SIDES OF THE MICA PAD
TO-3 TRANSISTOR
#8667 SHOULDER WASHER
#8701 4-40 KEPS NUT
#8741 4-40X 1/2" BOLT
HEATSPREADER
#8701 4-40 KEPS NUT
SEE LAYOUT DIAGRAM
INITIAL TORQUE FOR TO-3'S IS 8 INCH/LB
COOLED FROM WAVE SOLDER IS 6 INCH/LB
#8701 4-40 HEX NUT
10. PCBSA: BREAK OUT BOARD BEFORE TESTING.
9. Q1 AND Q4 ARE HAND INSERTED.
4. MOUNTING HARDWARE FOR Q15 AND Q16.
3. MOUNTING HARDWARE FOR Q38 AND Q39.
2. MOUNTING HARDWARE FOR Q9 AND Q10.
6. MOUNTING HARDWARE FOR Q28 AND Q37.
1. MOUNTING DETAILS FOR 5W ADD #8629 SPACERS ONLY ON
5 WATT RESISTORS R46 AND R69. 5. MOUNTING HARDWARE FOR TO3 OUTPUTS
M1130 PRODUCTION NOTES
7. TAB WIRE COLOURS: TAB 1 RED 16AWG TAB 2 YEL 16AWG
TAB 4 WHT 16AWG TAB 5 BLU 16AWG
TAB 6 OUTPUT + TAB 7 OUTPUT -
8. Q37 IS HAND INSERTED AND BENT OVER WITH FLAT SIDE
UP AS SHOWN.
SEE LAYOUT DIAGRAM
OUT
AS35
TO-92
IN
REF
CEB
TO-92
BC560C
BC550C
ECB
TO-92
MPSA63
MPSA43
MPSA13
2N5551
MPSA56
MPSA06
2N5401
EB
TO-126
MJE350
MJE340
MJE270
BD238
BD140
BD139
MJE271
BD237
C
2SA2121-0
2SC5949-0
VIEW
BOTTOM
BE
MJ21196
MJ21195 IRL2910
IRF4905
IRF830
IRF720
IRF822
IRF5210
MTP10N15L
MTP12P10
MTP2P50E
TO-220
MTP23P06
MTP8P20
SDG
12
9
6
3
#
13
11
10
5
4
8
7
2
1DATE
MODEL(S):-
VER# DESCRIPTION OF CHANGE
7.00
8.00
5.20
.
.
6.00
6.10
JUN/17/02
.
.
JUL/04/02
AUG/31/04 R81,R87 249R-FLAMEPROOF ->241R FUSIBLE
PC#6547 ADD TEST JIG HOLE
ZD41, ZD42 14V->16V . C27 10n->33n
Q30,Q32,Q34,Q36 #6927->MJ21195. R120,R121 100R->470R
PC#6538 Q18,Q20,Q22,Q24 #6900 ->MJ21196
PC#6844 REDO SOLDERMASK
CONVERT TO PCAD2002
PC#7083 MTP10N15L TO IRF630NPBF
M1130 Database History
..
JUN/23/06
Solderability updates, changed MR854 diodes to 0.6" spacing.2007/11/01
2007/12/07 Added routing at top and bottom of middle zippers.
. . Changed Q9 and Q10 patterns to correct version.
2008/MAR/11 .
.
9.00
PC#7076, REPLACE #6989 & #6990 WITH #7004 & #7005
2008/04/01 V9.10 PC#7514 - new drill, route & trace
AP2020 / V22 / VX1200CE
JUN/02/05
12
9
6
3
#
13
11
10
5
4
8
7
2
1DATE
MODEL(S):-
VER# DESCRIPTION OF CHANGE
SEP/06/01
JUL/17/98
MAR/10/98 3.00
4.00
5.00
.
5.10
.
DEC/17/01
PC#5641 ADD LD1
PC#5799 REPLACE TAB3 WITH AN EYELET
PC#6434 ADD C45,C121 AT Q39. ADD C44, R120 AT Q38
PC#6051 Q27,Q28 HEATSINK #3896 -> #3894
PC#6493 R120,R121 150R->100R
.
.
..
.
.
1.00
2.00
.
.
.
DEC/97
DEC/16/97
.
.
. ->4N7. C17 680p ->1N5. C25 470p->1n . ADD R118, R119
R54,R55 24K9->17K8. R79,R114 220R->249R. C36,C38 22N-
->30K1. R52, R61 16K9->14K7. R53,R57 64K9->60K4
R21, R36 20K->15K R31 82K->47K, ZD43 20V->18V. R3 20K-
FIRST PRODUCTION
C43, D46. ADD TAB TO CONNECT TO OTHER AMP
R109,R108,R50,R70 FLAMEPROOF TO REGULAR
D9 4148 -> 4004 C30,C32 4P7 ->10P/200V
M1130 Database History
AP2020 / V22 / VX1200CE
11
8
5
2
12
9
6
13
10
7
3
4
1
D
D
D
08-SEP-2010
V
V
V
V11
N
N
N
PC8057: MOVE TB2 AWAY FROM CAP GG
D
D
D
D
D
D
D
23-JUL-2009
V
V
V
V
V
V
V
V10.00
N
N
N
N
N
N
N
ADDED 6C XH CONN YS#2327
03-FEB-2011 . PC8189: CHANGE #3759 EYELETS TO NORMAL GG
12
9
6
3
#
13
11
10
5
4
8
7
2
1DATE
MODEL(S):-
VER# DESCRIPTION OF CHANGE
D
D
DV
V
V
V
V
D
D
N
N
N
N
N
D
D
DV
V
V
VDN
N
N
N
2007/12/07 v13 Added routing to zipper. Deleted extra break holes in middle
.. Moved pads for Q9 and Q10 down 0.075in.
2008/04/01 V14 PC#7514 - moved routing on back side edges.
2009/07/23 V15 Added scores and revised routing.
M1130 Drilling History
AP2020 / V22 / VX1200CE
17 17
16 16
15 15
14 14
13 13
12 12
11 11
10 10
9 9
8 8
7 7
6 6
5 5
4 4
3 3
2 2
1 1
A
A
B
B
C
C
D
D
E
E
F
F
G
G
H
H
I
I
J
J
K
K
L
L
M
M
N
N
O
O
P
P
Q
Q
R
R
S
S
T
T
U
U
V
V
of
Filename:
PCB# Sheet 11
Product
Date: Rev: YsType:YS
M1131V08sch.sch2002
M1131
Tue Jul 06, 2010
Sheet1
V08
AP-2020/VX1200/V22
of
Filename:
PCB# Sheet 11
Product
Date: Rev: YsType:YS
M1131V08sch.sch2002
M1131
Tue Jul 06, 2010
Sheet1
V08
AP-2020/VX1200/V22
N10
4N7
N46
N42
N47
T1
N36
N34
N23
N29
N22 N49
N71
N69
N62
N63
N13
N44
N37
N68
N78
N79
N54
N56
N59
N60
N83
N40
C1
C1
N12
N39
9
8
7
6
5
YEL
W6
.
W11
.
W13
.
N24N25
N33
N21
N66
R15
1/4W
.
10K
R36
1/4W
MINI
33K
R24
1/4W
.
3K9
R25
1/4W
MINI
5K6 C7 63V3300U C5 63V3300U
N64
W35
.
.
WHT
W23
.
.
BLK
4148
D1
N70
N73 N14
W39
.
.
BLK
N75
R32
1/4W
MINI
33K
N55 N57
W28
.
.
BLK
W12
.
W14
.
R27
1/4W
.
100R C6 63V3300U C4 63V3300U
C12
63V 4U7
W24
.
.
YEL
W33
.
.
BLU
C21 100V100N
C20 100V100N
N45
4.5 AMPS
C2 250V4N7 N11
N48
N41
ORANGE
BLUE
BRN/BLK
N35
N31
N53
N16
N26
N51
N67
N50
N65
N52
N86
N82
N18 N15
N85
N61
N58
N43
R21
1/4W
.
1K
R17
1/4W
.
1K
R14
1/4W
MINI
5K6
680n
C1 275V22N
C13 100V100N R12
1/4W
MINI
10K
R10
1/4W
MINI
200K
N38
4148
D5
4148
D4
BROWN
4
3
2
ORANGE
1
BLACK
WHITE
R8
1/4W
MINI
8K2
R11
1/4W
.
20K R9
1/4W
.
3K3
GREY
RED
YELL
RED
GREY
GREY
RED
RED
GREY N28
4148
D2
N17
N19
N27
TO92
BC550C
Q5
5101
R22
1/4W
.
10K
N72
TO92
MPSA06
Q1
5103
1N753ARL6V2
ZD1 0W5
N32
R37
1/4W
.
20K
R38
1/4W
.
20K
R28
1/4W
.
10K
R29
1/4W
.
62K
4007
D7
4007
D6
W37
.
.
RED
N74
RED
LD1
6405
FUNC 4007
D8
N77
{Voltage}
TO92
5190
Q7:A
MBS4992
R33
1/4W
.
10R
C15 16V10U
W29
.
.
YEL
W30
.
.
BLK
R1
1/2W
.
8K2
N81
W19
TO INPUT
BLK
R2
1/4W
.
1K
N30 N20
{Voltage}
TO92
5190
Q10:A
MBS4992
C16 16V10U
R34
1/4W
MINI
33K
C9 25V100U
R6
1/4W
.
10R
R5
1/4W
.
10R
N80
R18
1/4W
MINI
5K6
W40
.
.
WHT
W7
NEUTRAL
.
W3SWITCH
BLK
W8
DUMMY.
R16
1/4W
MINI
5K6
4148
D3
BRIDGE
BR2
Flat
6419
BRIDGE
BR1
Flat
6419
1N5260B43V0
ZD5 0W5
FAN
{C_Type}
FAN1
FAN
C19 100V100N
R31
1/4W
FLMP
1R
W41:A 2 4
V+
11 V-
U1:E
R3
1/2W
.
8K2
1N5248B 18V0
ZD20W5
1N5248B 18V0
ZD40W5
R4
1/4W
.
1K
W25 .
RED
C8 25V100U
G
MT2
MT1
BCE
BD139
BC
TO-92
MPSA63
MPSA43
2N5551
E
MPSA56
MPSA06
MPSA13
2N5401
BE
TO-92
BC560C
C
BC550C
G
MT1 MT2
TO220
STM-BTB-600BRG Q8
6517.
G
MT1 MT2
TO220
STM-BTB-600BRG Q9
6517.
3
15W1:C
6
15W1:F
R23
1/4W
.
3K3
C17 100V10N
CH1198E
1
15W1:A
R19
1/4W
.
470R
2
15W1:B
5
15W1:E
4
15W1:D
C18 100V10N
R13
1/4W
.
470R
U1:C
TL074CN
FAN VOLTAGE 16V MAX
WITH AMPLIFIER HOT
R7
1/4W
.
16K
R20
1/4W
MINI
200K C14 63V470U
TO92
BC550C
Q6
5101
W34
.
.
WHT
W22
.
.
BLK
W36
.
.
RED
MJF6388
6815
Q3
T221D
.
4007
D9
W27 AMP B
.
BLK
W38
AMP A .
YEL
MJF6388
6815
Q2
T221D
.
R35
1/4W
.
10R
U1:B
TL074CN
U1:D
TL074CN
CE POWER SUPPLY
7
8
6
1
2
3
4
5
GENERIC_XF_E
T1
{Description}
Thermal Breaker
S1
S3
DPDT Switch
SPDT Switch
S2
W2
XFMR.
1N753ARL6V2
ZD3 0W5
U1:A
TL074CN
W41:B 2
W32
.
.
BLU
W31
.
.
YEL
R30
1/4W
FLMP
1R
1+
1_
6956
SPEAKON 4C H
J2:A
A
2+
2_
6956
SPEAKON 4C H
J2:B
A
MJF6668
6814
Q4
T221D
.
W26
.
.
RED
2+
2_
6956
SPEAKON 4C H
J1:B
B
1+
1_
6956
SPEAKON 4C H
J1:A
B
6889_PC C
TO-221D
MJF6388
BE
MJF6668
G
TO-92
MBS4992
MT2MT1
NORTH AMERICAN POWER SUPPLY
12
9
6
3
13
10
11
7
4
1
2
5
8
V
V
V
V
V
V
V
V
V
V
V
V
V
D
D
D
D
N
N
N
N
D
D
D
D
D
D
D
D
D
N
N
N
N
N
N
N
N
N
13
10
7
4
1
9
11
12
8
#
2
3
5
6
VER#
MODEL(S):-
DATE DESCRIPTION OF CHANGE
.
6.10
5.00
.
2.00
V08
7.00
6.00
5.10
4.00
.
3.00
.
17-MAR-2010
FEB/01/08
MAY/27/05
.
MAY/12/98
REVISED SOLDER MASK.
PC#6919 REDO SOLDERMASK
AUTO-INS. C2 #6458->#6451. PC#6009 SPKON REMOVED
PC#5654 ZD1 4V7 -> 6V2. SHEAR HOLES MOVED TO
AP2020/VX1200/V22
AUG/11/09
11-MAR-2010
APR/24/06
DEC/16/04
SEP/17/99
AUG/24/99
.
PC7996: Replace eyelets with TABs. GG
CONVERT TO PCAD2002
PC#7004 TRIAC MAC-224-4 TO STM-BTB-600BRG
PC#6788 REDO AC FOR CE COMPLIANCE
PC#6064 MOVE ZD4 AND W19
PC#5943, PC#6064, PARTS MOVED FOR CLEARANCE IN
CLEAR HEATSPREADER. 1 EYLET TO TAB
M1131 Database History
MAY/15/06
REMOVE CLINCHS, RESIZE BOARD, ADD PATCH CABLE
PC8040: Double sided board GG
VCD
N
CH
GIN LONG AXIS
SHORT AXIS
ORIGIN
INSERT
BlankSize - 14450x10000
BlankSize - 14450x10000
SEE LAYOUT DOCUMENTATION
V
T
R
V
T
R
V
T
RV
T
R
16
V
T
R
V
T
R
1 2
RB
V
T
R
V
T
R
V
T
R
V
T
R
+1
-2 -1
+2
SPEAKON 4C H
+1
-2 -1
+2
SPEAKON 4C H
AB
4007
4007
16V
10U
1K
20K
10R
10R
5K6
200K
2327
10N
100N
4148
100N
33K
8K2
10N
18V0
1K
20K
4007
25V
100U
25V
100U
33K
4U7
63V
16V
10U
4007
470R
470R
3K3
6405
RED
5621
63V
470U
100N
100N
10K
10R
MJF6388
6815
MPSA06
TO92
MBS4992
33K
43V0
6814
MJF6668
10R
4056
BC550C
8K2
1/2W
6V2
10K
4148
4148
10K
4148
5K6
1K
6V2
1R
3K9
10K
6451
250V
4N7
63V
3300U
5617
200K
16K
BRIDGE
6419
4148
5K6
1R
62K
100R
18V0
TO92
MBS4992
6517
STM-BTB-600BRG
TO220
6517
TO220
STM-BTB-600BRG
BC550C
275V
6435 22N
TL074CN
63V
3300U
5617
3300U5617 63V
BRIDGE
6419
1/2W
8K2
MJF6388
6815
69566956
3300U
63V
5617
3K3
20K
1K
5K6
2/2M1131
1/2
M1131
V08
V08
M1131
V08
AP2020 / V22
/ VX1200CE
AP2020 / V22
/ VX1200CE
X18
X17 X20
X21
X22
X23
D7 D9
X24
X26
C15
R2
R37
R35
R6
R16
R20
W1
C18
C19
D1
C21
R32
R8
C17
ZD2
W31
YEL
X19
R4
W7
NEUTRAL
W6
RED
R38
D6
C8
C9
W37
RED
W36
RED
R36
C12
C16
W25
RED
W32
BLU
D8
R13R19
X16
R23
X25
LD1
C14
C13
C20
R12
R33
Q2
W12
GRY
W40 WHT
Q1
Q10
R34
ZD5
Q4
R5
W38
YEL
X14
W41
LOC
BEC
Q5
W30
BLK
W39
BLK
R1
ZD3
R22
D3
D2
R15
D5
R18
R21 TP1
ZD1
R30 R24
TP2
R28
C2
W2
XFMR
C7
W35 WHT
W33
BLU
W22BLK
R10
R7
W24
YEL
BR1
D4
W14
GRY
W19
BLK
TO INPUT
R25
R31
R29
R27
ZD4
Q7
W26
RED
Q8
Q9
W28
BLK
Q6
C1
U1
C5
C6
W23BLK
W13
YEL
W11
RED
W34
WHT
W8
DUMMY
W3
BLK
SWITCH
BR2
R3
Q3
J2
J1
W27
BLK
W29
YEL
C4
R9
R11
R17
R14
5.
4.
3.
1.
2.
SEE DETAIL 'A'
FOR L BRACKET MTG.
#6814
#6815
#6815
DETAIL 'A' - L BRACKET ASSY
M106 HEATSPREADER
#3501 WASHER - 3 PLACES
THERMAL COMPOUND APPLIED
'L' BRACKET ASSEMBLY PARTS
Close up of L brkt Pic
4-40 screw shown from other side of pcb
Close up of L brkt Pic
TO AREAS CONTACTED
BY Q3,Q4, AND Q5
#8861 4-40 SCREWS
- 3 PLACES
FOR Q3,Q4,Q5
SEE LAYOUT DIAGRAM
Assy Pic Here
#8793 4-40 HEX NUT
- 3 PLACES
Q2,Q3,Q4 BEND THE LEADS (UNCUT)
Q8,Q9 USE #8799 SELF TAPPING SCREW
FOR C1 USE 22N FOR NORTH AMERICAN
AND SOLDER
DO NOT CUT CENTER LEAD OF THE TRIACS
SEE M1131 HISTORY TABLES
ASSEMBLED HEAT SPREADER SHOWN
AND 680N FOR EURO/CE
SEE DETAIL 'A' BEFORE MOUNTING L BRACKET
ALONG THE TRACE
BEND THE LEAD (UNCUT) ALONG THE TRACE
M1131 PRODUCTION NOTES:
#3545 ‘L’ BRKT
#8701 4-40 KEP NUT #8865 4-40 X 5/16 SCREW
MOUNTS FROM OTHER SIDE
#8832 6-32 x ¼ Taptite
PIN CONFIGURATION
SEE M1131 PRODUCTION NOTES
CEB
TO-92
BC560C
BC550C
BEC
TO-221D
MJF6388
MJF6668
6
4
2
+V
1
-V
4
9
11
13
7
5
3
1
2 3
8
10
12
14
MT1 MT2G
TO-92
MBS4992
ECB
TO-92
MPSA63
MPSA43
MPSA13
2N5551
MPSA56
MPSA06
2N5401
G
MT2
MT1
BCE
BD139
BD139
BD139
BD139
11
8
5
2
12
9
6
13
10
7
3
4
1
D
D
D
D
V
V
V
V
N
N
N
N
D
D
D
D
D
D
D
D
V
V
V
V
V
V
V
V
V
N
N
N
N
N
N
N
N
ND
12
9
6
3
#
13
11
10
5
4
8
7
2
1DATE
MODEL(S):-
VER# DESCRIPTION OF CHANGE
D
D
DV
V
V
V
V
D
D
N
N
N
N
N
D
D
DV
V
V
V
V
V
D
DN
N
N
N
N
N
13 REVISED AS A RESULT OF FORCE UPDATE.
M1131 Drilling History
FEB/01/08
AP2020/VX1200/V22
AUG/11/09 14 REVISED BOARD AND PANEL
D
12
9
6
3
#
13
11
10
5
4
8
7
2
1DATE
MODEL(S):-
VER# DESCRIPTION OF CHANGE
6.00
.17-MAR-2010
CONVERT TO PCAD2002
APR/24/06
MAY/27/05
DEC/16/04 4.00
5.00
5.10
2.00
.
3.00
.
.
MAY/12/98
.
AUG/24/99
.
SEP/17/99 PC#6064 MOVE ZD4 AND W19
AUTO-INS. C2 #6458->#6451. PC#6009 SPKON REMOVED
PC#5943, PC#6064, PARTS MOVED FOR CLEARANCE IN
CLEAR HEATSPREADER. 1 EYLET TO TAB
PC#5654 ZD1 4V7 -> 6V2. SHEAR HOLES MOVED TO
PC#6788 REDO AC FOR CE COMPLIANCE
PC#6919 REDO SOLDERMASK
PC#7004 TRIAC MAC-224-4 TO STM-BTB-600BRG
M1131 Database History
MAY/15/06 REVISED SOLDER MASK.6.10FEB/01/08 7.00 REMOVE CLINCHS, RESIZE BOARD, ADD PATCH CABLE
AP2020/VX1200/V22
AUG/11/09
11-MAR-2010 V08 PC7996: Replace eyelets with TABs. GG
PC8040: Double sided board GG
11 11
10 10
9 9
8 8
7 7
6 6
5 5
4 4
3 3
2 2
1 1
A
A
B
B
C
C
D
D
E
E
F
F
G
G
H
H
I
I
J
J
K
K
L
L
M
M
N
N
O
O
P
P
Q
Q
Product
POT BOARD
Date:
Filename:
PCB#
X8014-7V00sch.sch2002
AP2020/VX1200/V22
Mon Mar 30, 2009
ofSheet
Rev:
11
7V00
Product
POT BOARD
Date:
Filename:
PCB#
X8014-7V00sch.sch2002
AP2020/VX1200/V22
Mon Mar 30, 2009
ofSheet
Rev:
11
7V00
*
*
*
R29
1/4W
MINI
620R
R53
1/4W
MINI
620R
C2 100V220P
R36
1/4W
MINI
470K
1N5225B 3V0
ZD10W5
*R54
1/4W
MINI
4K7
615 W2:F
415 W2:D
115 W2:A
515 W1:E
315 W1:C
215 W1:B
515 W3:E
415 W3:D
215 W3:B
R34
R47
R40
R45
AP2020 V22
470R 2K
470R 2K
14K7 12K1
14K7 12K1
R39
1/4W
MINI
15K
R32
1/4W
MINI
15K
R50
1/4W
MINI
15K
C25 16V33U
R33
1/4W
MINI
10K
C6 63V470N
C26 16V33U
R7
1/4W
MINI
4K7
R47
1/4W
MINI
R46
1/4W
.
120K
R40
1/4W
.
R30
1/4W
MINI
1K
C4 50V470N
4148
D9
R31
1/4W
MINI
62K
C38 100V220P
R45
1/4W
.
R43
1/4W
.
120K
R52
1/4W
MINI
1K
4148
D6
C36 63V4U7
R42
1/4W
.
82K5
C18 100V47P
R61
1/4W
MINI
15K
R63
1/4W
MINI
4K7
R35
1/4W
.
82K5
R19
1/4W
MINI
15K
R17
1/4W
MINI
4K7
R67
1/8W
FLMP
249R
R37
1/8W
FLMP
249R
R22
1/8W
FLMP
249R
R24
1/8W
FLMP
249R
R23
1/8W
FLMP
249R
1/4W
22M
R15
.R27
1/4W
MINI
47K
50VC9
100N
515 W2:E
315 W2:C
215 W2:B
615 W1:F
415 W1:D
615 W3:F
115 W1:A
315 W3:C
115 W3:A
R2
1/4W
.
100K
8
V+
4V-
U2:C
100V
C7
100N
R4
1/4W
MINI
8M2
R5
1/4W
MINI
8M2
4148
D11
R59
1/2W
.
1K
R136
1/4W
MINI
2K
TO92
BC550C
Q7
5101
R56
1/4W
MINI
2K
M
AUD
P2
4390
10K
Function
R49
1/4W
MINI
15K
C5 63V470N
R48
1/4W
MINI
10K
C35 63V4U7
R51
1/4W
.
62K
C3 50V470N
R38
1/4W
MINI
15K
R20
1/4W
MINI
15K
R18
1/4W
MINI
4K7
R64
1/8W
FLMP
249R
R62
1/8W
FLMP
249R
R21
1/8W
FLMP
249R
1/4W
22M
R16
.
100V
C10
100N
R28
1/4W
MINI
47K
BE
TO-92
BC560C
C
BC550C
R1
1/4W
MINI
100K
100V
C8
100N
C126
100V 100N C1 100V220P
R3
1/4W
MINI
470K
1N5225B 3V0
ZD30W5 R58
1/2W
.
1K
4148
D10
GRN
LD4
POWER
5908 RED
LD3
PROTECT
5906
W4
3622
* NOTE
1N750ARL 4V7
ZD20W5
R68
1/4W
MINI
47K
C21 63V220N
M1132-M1154
RED
LD5
R-CLIP
5906
TO92
BC560C
Q3
5102
TO92
BC560C
Q6
5102
C37 100V220P
C40 100V100P
1/4W
22M
R66
.
R65
1/4W
MINI
15K
LM13600NU3:B
R8
1/4W
MINI
4K7 TO92
BC560C
Q4
5102
R69
1/4W
MINI
47K
R44
1/4W
MINI
1K
U2:B
MC33078P
C17 100V47P
C39 100V100P
R25
1/4W
MINI
15K
LM13600NU4:A
TO92
BC560C
Q5
5102
GRN
LD2
R_ACTIVITY
5908
C127 100V100N
TO92
MPSA13
Q1
5105
GRN
LD1
L_ACTIVITY
5908
R57
1/4W
MINI
100K
M
AUD
P1
4390
10K
Function
R34
1/4W
MINI
RED
LD6
L-CLIP
5906
1/4W
22M
R60
.
R55
1/4W
MINI
15K
LM13600NU3:A
U2:A
MC33078P
R41
1/4W
MINI
1K
R26
1/4W
MINI
15K
LM13600NU4:B
(VCC)LM13600N
Dual VCA
6745
U3:D
{Function}
TO92
MPSA13
Q2
5105
C22 63V220N
BC
TO-92
MPSA63
MPSA43
2N5551
E
MPSA56
MPSA06
MPSA13
2N5401
6840_PC
(VCC)LM13600N
Dual VCA
6745
U4:C
{Function}
U3:E
"STYLE_P22"
13
10
7
4
1
9
11
12
8
#
2
3
5
6
VER#
MODEL(S):-
DATE DESCRIPTION OF CHANGE
V
.
6.00
3.00
2.00
V
.
.
7.00
5.00
4.00
2.10
.
D
.
OCT/11/06
MAY/27/05
DEC/09/98
N
TO #6113 2K 5%, CHANGE R40 AND R45 FROM 14K7 TO
ADD SUPPORT SCREW FOR POT
PC#6916 REDO SOLDERMASK
PC#5688 SPACING FOR C38,C37 CHANGED. R58,R59
AP2020-VX1200-V22
.
D
.
MAR/30/2009
JUL/20/06
APR/2005
NOV/20/01
.
N
#4773 12K1 1%
CREATE X8014, M1132 FOR AP, VX. M1153 FOR VTC
REPLACE OPTO COUPLERS WITH LM13600 CIRCUIT
CONVERT TO PCAD2002
PC#6466 U1,U3 NSL-28AA -> NSL32SR2
N
X8014-M1132-M1154 Database History
PC#7741, M1154,V22 CHANGE R34 AND R47 FROM 470R
6745_PC
VCD
LONG AXIS
SHORT AXIS
ORIGIN
INSERT
5906
5908
5906 5906
2327
2327
5908
5908
2327
3622
BlankSize - 14000x11000
SEE LAYOUT DOCUMENTATION
+
-
+
-
+
-
+
-
16
16
+
-
+
-
16
R-CLIP
R_ACTIVITY
PROTECT
L-CLIP
POWER
L_ACTIVITY
GAIN GAIN
4K7
15K
220N
100N
120K
4K7
47K
15K
470N
22M
15K
100N
47K
100P
8M2
47P
82K5
15K
100K
15K
1K
22M
249R
100N
2K
3V0
4148
4K7
47K
47P
100N
1K
62K
470N
3V0
4K7
BC560C
4148
470K
8M2
BC560C
2K
15K
100K
MPSA13
1K
620R
4V7
82K5
220P
470N
BC560C
1/2W
1K
4K7
249R
100P
220P
220N
470K
33U
16V
RED
249R
100K
100N
BC550C
22M 10K
120K
249R
15K
249R
4U7
63V
12K1
MC33078P
15K
22M
GRN
47K
249R
62K
1K
220P 4K7
15K
15K 100N
249R
4U7
63V
620R
470N
BC560C
15K
12K1
LM13600N 16V
33U
RED
4148
220P
4148
10K
MPSA13
RED
15K
249R
GRN GRN
1/2W
1K
10K
14in 14C
10K
LM13600N
LCLP
TEMPB
SDOWN
TEMPA
V-
LVGND
V+
TEMPA
LSPOST
SDOWN
SDOWN
PROT B
RSIG
RREF
M1132 / BM1154
#3622-M1132
X8014 TO TOP AMP TO POWER
PCB TO BOTTOM
AMP
V22
LREF
PROTECTA
TEMPB
RCLP
AP2020
VX1200
#3604-M1132B
M1132-AP2020 7V00
M1154-V22
M1132B-VX1200
R18
R25
C21
X23 C126
R46
X29 R63
R69
R65
C5
R16
R49
C9
R28
C39
R4
C18
R42
R38
X31 R1 R39
R41
R66
X16
X18
R62
C7
X2
R136
ZD1
D6
R7
X26
R27
X4
C17
C127
R44
R31
C4
ZD3
X6 X22
X28
X30
R17
Q5
X8D11
X11
R3
R5
Q6
R56
R19
R2
Q1
X9
R30
R29
ZD2
R35
C38
X25
C6
Q3
R58
X34
R54
R64
C40
C37
C22
R36
C25
LD5
R67
R57
C10 X24
Q7
R15
R48
R43
R22
R20
R21 C35
R40
U2
X17
R61
R60
LD2
R68
R23
R51
R52
X19 X3
X27
X14
X10
C1 R8
X5 R32
X21
X7
R55 C8
R37
C36
R53
C3
Q4
R26
R45
U4
X13
C26
X20 X1
LD3
D9
C2
D10
R33
Q2
LD6
R50
X12
W1
X33
X15
R24
W2
LD4
LD1
R59
W3
P2
W4
P1
U3
X36 X35
R34
R47 2K
2K
M1154 V22
1.
0.4"
2.
LED
PCB
P22
8870
SCREW
4. FOR M1132 USE #3622 CABLE
FOR M1132B USE #3604 CABLE
PT#3739
3511
POT
SPACER
3. ADD A STICKER OVER THE LEGEND
"M1132B" TO AID IN IDENTIFYING
VX1200 BOARDS.
WASHER
SEE LAYOUT DIAGRAM
PRODUCTION NOTES
PIN CONFIGURATION
SEE LAYOUT DIAGRAM
CEB
TO-92
BC560C
BC550C
ECB
TO-92
MPSA63
MPSA43
MPSA13
2N5551
MPSA56
MPSA06
2N5401
"STYLE_P22"
4
1
6
5
3
#
2
MODEL(S):-
PC#
*PLACE IMPLEMENTED CHANGES INTO BOARD HISTORY
PENDING CHANGE
X
X
X
X
X
X
PC
PC
PC
PC
PC
PC
X8014-M1132-M1154 PENDING CHANGES
AP2020-VX1200-V22
12
9
6
3
#
13
11
10
5
4
8
7
2
1DATE
MODEL(S):-
VER# DESCRIPTION OF CHANGE
V
V
D
DN
N
JUL/20/06 5.00
2.00
.
2.10
3.00
4.00
DEC/09/98
.
NOV/20/01
MAY/27/05
APR/2005 CONVERT TO PCAD2002
PC#6916 REDO SOLDERMASK
PC#6466 U1,U3 NSL-28AA -> NSL32SR2
SPACING TO .6" FOR 1/2W. ADD POT SUPPORT SCREW
PC#5688 SPACING FOR C38,C37 CHANGED. R58,R59
REPLACE OPTO COUPLERS WITH LM13600 CIRCUIT
OCT/11/06 6.00 ADD SUPPORT SCREW FOR POT
7.00 CREATE X8014, M1132 FOR AP, VX. M1153 FOR VTC
TO #6113 2K 5%, CHANGE R40 AND R45 FROM 14K7 TO
#4773 12K1 1%
.
.
..
.
. PC#7741, M1154,V22 CHANGE R34 AND R47 FROM 470R
X8014-M1132-M1154 Database History
AP2020-VX1200-V22
JUN/23/09
PIN CONFIGURATION
SEE LAYOUT DIAGRAM
CEB
TO-92
BC560C
BC550C
ECB
TO-92
MPSA63
MPSA43
MPSA13
2N5551
MPSA56
MPSA06
2N5401
"STYLE_P22"
4
1
6
5
3
#
2
MODEL(S):-
PC#
*PLACE IMPLEMENTED CHANGES INTO BOARD HISTORY
PENDING CHANGE
X
X
X
X
X
X
PC
PC
PC
PC
PC
PC
X8014-M1132-M1154 PENDING CHANGES
AP2020-VX1200-V22
12
9
6
3
#
13
11
10
5
4
8
7
2
1DATE
MODEL(S):-
VER# DESCRIPTION OF CHANGE
V
V
D
DN
N
JUL/20/06 5.00
2.00
.
2.10
3.00
4.00
DEC/09/98
.
NOV/20/01
MAY/27/05
APR/2005 CONVERT TO PCAD2002
PC#6916 REDO SOLDERMASK
PC#6466 U1,U3 NSL-28AA -> NSL32SR2
SPACING TO .6" FOR 1/2W. ADD POT SUPPORT SCREW
PC#5688 SPACING FOR C38,C37 CHANGED. R58,R59
REPLACE OPTO COUPLERS WITH LM13600 CIRCUIT
OCT/11/06 6.00 ADD SUPPORT SCREW FOR POT
7.00 CREATE X8014, M1132 FOR AP, VX. M1153 FOR VTC
TO #6113 2K 5%, CHANGE R40 AND R45 FROM 14K7 TO
#4773 12K1 1%
.
.
..
.
. PC#7741, M1154,V22 CHANGE R34 AND R47 FROM 470R
X8014-M1132-M1154 Database History
AP2020-VX1200-V22
JUN/23/09
VTC V22 Parts List 8/14/2012
YS # Descriptio
n
Qty. YS # Descriptio
n
Qty. YS # Descriptio
n
Qty.
5906 RED 3MM LED 1V9 20MA.4SPCER T&R 3 3467 CLIP 205X032 14-16AWG DISC/INSUL 1 6141 1/4W 5K6 5%MINI T&R RES 8
6405 RED 3MM LED 2V0 20MA BRT 3 3485 CLIP 250X032 18-22AWG RIGHT ANGL 5 5001 1/4W 6K04 1% T&R RES 2
5908 GRN 3MM LED 1V9 20MA.4SPCER T&R 3 3490 CLIP 250X032 14-16AWG DISCO/INSL 20 4926 1/4W 7K5 5% .2"U T&R RES 2
6419 BRIDGE 35A 400V WIRE LEAD GI3504 4 3529 CLIP 250X032 TN 18-22AWG MALE 2 4663 1/2W 8K2 5% T&R RES 2
6425 BAV21 200V 0A25 DIODE T&R 8 3601 RING TERMINAL 16AWG WIRE & #8 SCREW 1 4990 1/4W 8K2 5%MINI T&R RES 1
6825 1N4148 75V 0A45 DIODE T&R 63 3795 #8 GROUND LUG ZIERICK 505-169 1 4762 1/4W 9K760 0.1% *** T&R RES 8
6438 1N4007 1000V 1A0 DIODE T&R 6 3918 1/4" JCK PCB MT HORZ SLIM W/SCREW 2 4629 1/2W 10K 5% T&R RES 4
6934 MR854 400V 3A0 DIODE FASREC 12 6956 SPKON 4C PCB MT HORZ GRY #4 2 4800 1/4W 10K0 1% T&R RES 2
6432 1N5248B 18V0 0W5 ZENER 5% T&R 4 3922 XLR FEML PCB MT HORZ THIN SNAP-IN 2 4829 1/4W 10K 5% T&R RES 3
6436 1N753ARL 6V2 0W5 ZENER 5% T&R 2 3451 EYELET SMALL 0.089 OD PLATED 32 4983 1/4W 10K 5%MINI T&R RES 5
6439 1N5225B 3V0 0W5 ZENER 5% T&R 2 9198 FAN 80MM X 80MM 40CFM 12VDC 1 6116 1/4W 10K0 1%MINI MF T&R RES 8
6440 1N750ARL 4V7 0W5 ZENER 5% T&R 1 3894 HEATSINK TO-220 W/TAB BLACK ANODIZE 4 4773 1/4W 12K1 1% T&R RES 2
6460 1N5260B 43V0 0W5 ZENER 5% T&R 3 3501 B52200F006 COMP WASH #4 SMALL 19 5008 1/4W 14K7 1% T&R RES 4
6461 1N5240BRL 10V0 0W5 ZENER 5% T&R 2 3545 ANGLE BRACKET .5" X .5" X .57" 1 4979 1/4W 15K 5%MINI T&R RES 22
6824 1N5246B 16V0 0W5 ZENER 5% T&R 4 3801 5/8" BUMPER BUTTON BLACK 2 4876 1/4W 16K 5% T&R RES 1
6459 1N4732A 4V7 1W0 ZENER 5% T&R 2 3803 NYLON SECUR-A-TACH MINI PLASTIC TIE 1 4771 1/4W 17K8 1% T&R RES 6
6822 1N4745A 16V0 1W0 ZENER 5% T&R 8 3810 4" NYLON CABLE TIE 17 4885 1/4W 20K 5% T&R RES 3
5101 BC550C TO92 NPN TRAN T&R TB 17 3827 SQUARE BUMPER BUTTON BLACK 6 5003 1/4W 30K1 1% T&R RES 4
5102 BC560C TO92 PNP TRAN T&R TB 14 8433 KNOB AP SERIES PLASTIC 2 4840 1/4W 33K 5% T&R RES 1
5103 MPSA06 TO92 NPN TRAN T&R TA 3 8661 KNOB BUTTON FLAT GREY 3 6122 1/4W 33K 5%MINI T&R RES 3
5107 2N5551 TO92 NPN TRAN T&R TA 2 8437 FAN FILTER LABEL 1 5002 1/4W 42K2 1% T&R RES 2
5108 2N5401 TO92 PNP TRAN T&R TA 4 3468 8' 3/16 SJT AC LINE CORD STRIP 17" 1 6119 1/4W 47K 5%MINI T&R RES 8
5113 MPSA42 TO92 NPN TRAN T&R TA 4 3821 STRAIN RELIEF HEYCO #1200 1 4835 1/4W 56K 5% T&R RES 4
5105 MPSA13 TO92 NPN DARL T&R TA 2 8261 GE VELVET/MATTE LEXAN .007"X12"X24" 0.333 4761 1/4W 60K4 1% T&R RES 4
6814 MJF6668 T221D PNP TRAN DARL TJ 1 8263 METALIZED POLYESTER .005 X 12"X 24" 0.02 4848 1/4W 62K 5% T&R RES 2
6815 MJF6388 T221D NPN TRAN DARL TJ 2 8701 4-40 KEPS NUT ZINC 16 6139 1/4W 62K 5%MINI T&R RES 1
6873 MJE340 TO126 NPN TRAN TG 6 8793 4-40 HEX NUT ZINC 3 4772 1/4W 82K5 1% T&R RES 2
6874 MJE350 TO126 PNP TRAN TG 6 8666 6-32 X 1/4" PEM THRD SPACER 0.213 2 4838 1/4W 100K 5% T&R RES 1
6752 MTP10N15L TO220 NCH MFET TN 2 8760 6-32 KEPS NUT TIN PLATED 32 6120 1/4W 100K 5%MINI T&R RES 2
6933 MTP23P06 TO220 PCH MFET TN 2 8800 6-32 KEPS NUT ZINC 5 4851 1/4W 120K 5% T&R RES 4
6909 MJ21196 TO3 NPN TRAN TH 8 8712 5/16-24 JAM NUT JS500 1 6137 1/4W 200K 5%MINI T&R RES 2
7004 2SA2121-0 TO3P PNP TRAN TK 2 3797 TO-247 THERMO CONDUCTIVE PAD 4 6126 1/4W 220K 5%MINI T&R RES 6
7005 2SC5949-0 TO3 NPN TRANSISTOR TK 2 3846 TO220 THERMO PAD LARGE HOLE 56359B 4 6127 1/4W 470K 5%MINI T&R RES 4
6910 MJ21195 TO3 PNP TRAN TH 8 3916 TO3 SIL-PAD REPLACES MICA 16 4951 1/4W 4M7 5% .2"U T&R RES 2
6840 MC33078P IC DUAL OP AMP 6 4124 SILPAD 1500ST 1.100 X0.820 BERQUIST 4 6132 1/4W 8M2 5%MINI T&R RES 2
6889 TL074CN IC QUAD O/A T.I ONLY 1 4597 22AWG STRAN TC WIR JMP 29 4751 1/4W 22M 5% T&R RES 4
6745 LM13600N IC XCONDUCTANCE AMP 2 4599 22AWG SOLID SC WIR T&R JMP 89 3622 14" 14C-28AWG DIP HDR CABLE .05" 1
5190 MBS4992 TO92 8V5 DIAC T&R 2 5299 24AWG SOLID SC WIR RAD JMP 37 3696 RELAY 1C 02AMP DC24 006MA PC-S 2
6517 BTB24-600 TO220AB 25A TRIAC 600V 2 4745 5.0W 0R1 5% BLK RES 8 8870 #4 X 1/4 PAN PH TYPE A ZINC 2
5200 _10P 200V 5%CAP T&R RAD CER.2NPO 4 2007 1/4W 1R 5%FLAME PROOF T&R RES 10 9975 #4 X 1/2 PAN PHIL TYPE A B.O.& WAX 4
5817 _15P 100V 2%CAP T&R RAD CER.2NPO 2 4682 1/2W 1R 5%PHILIPS SMAL T&R RES 6 8799 #6 X 1/4 PAN PH TYPE B JS500 2
5405 _27P 200V 5%CAP T&R RAD CER.2NPO 2 4911 1/4W 2R2 5% T&R RES 8 8865 4-40 X 5/16 PAN PH MS JS500 4
5408 _47P 100V 10%CAP T&R BEAD NPO 2 4748 2.0W 3R9 5% T&R 2 8742 4-40 X 3/8 PAN PH TAPTITE JS500 4
5410 100P 100V 10%CAP T&R BEAD NPO 2 4733 5.0W 5R6 5% BLK RES 2 8741 4-40 X 1/2 PAN PH MS JS500 11
5277 220P 200V 5%CAP T&R RAD CER.2NPO 4 2037 1/4W 10R FUSIBLE T&R RES 6 8871 4-40 X 5/8 PAN PH MS JS500 6
5412 220P 100V 10%CAP T&R BEAD NPO 12 4605 1/8W 10R 5% T&R RES 1 8902 4-40 X 3/4 PAN PHIL MS B/O & WAX 4
5206 __1N 400V 5%CAP T&R RAD .2FLM 4 4875 1/4W 10R 5% T&R RES 4 8832 6-32 X 1/4 PAN PH TAPTITE JS500 3
5422 __1N 50V 10%CAP T&R BEAD NPO 4 4930 1/4W 10R 5% .2"U T&R RES 1 8801 6-32 X 3/8 PAN PH TAPTITE JS500 3
5273 __1N5 200V 5%CAP T&R RAD CER.2NPO 4 2039 1/4W 22R0 FUSIBLE T&R RES 2 8829 6-32 X 3/8 FLAT PH TAPTITE BO#C HEA 56
5274 __2N2 200V 5%CAP T&R RAD CER.2NPO 4 2041 1/4W 39R0 FUSIBLE T&R RES 14 8761 6-32 X 1/2 PAN PHIL MS ZINC CLEAR 32
5209 __4N7 250V 5%CAP T&R RAD .2FLM 4 4899 1/4W 39R 5% T&R RES 2 8823 6-32 X 1 PAN PH TAPTITE JS500 1
6451 __4N7 250V 20%CAP BLK 'Y' 10MM AC 1 4817 1/4W 47R 5% T&R RES 2 8763 8-32 X 1/2 PAN PH MS JS500 BLACK 4
5204 _10N 100V 10%CAP T&R RAD .2FLM 2 4811 1/4W 68R 5% T&R RES 6 8999 8-32 X 5/8 PAN PH TAPTITE JS500 11
5210 _22N 100V 10%CAP T&R RAD .2FLM 4 2043 1/4W 75R FUSIBLE T&R RES 8 8809 10-32 X 1/4 PAN PH TAPTITE JS500 8
6435 _22N 275V 20%CAP BLK 'X2' 15MM AC 2 4852 1/4W 100R 5% T&R RES 1 8711 5/16-24 X 3 GRD 5 HEX BOLT JS500 1
5835 _33N 250VDC 10%CAP BLK RAD PLY FLM 2 4984 1/4W 150R 5%MINI T&R RES 4 8731 10-16 X 5/8 TYPE B HEX W/SLOT JS500 12
5226 _68N 100V 5%CAP T&R RAD .2FLM 4 2023 1/6W 220R0 1%FLAME PROOF T&R RES 2 3570 14 PIN SCKT CLOSED FRAME DIP ONLY 1
5228 100N 100V 5%CAP T&R RAD .2FLM 18 4977 1/4W 220R 5%MINI T&R RES 2 8663 11/64 NYLON SPACER (MICRO PLASTIC) 32
5314 100N 50V 10%CAP T&R BEAD X7R 3 2046 1/4W 240R FUSIBLE T&R RES 4 3744 SNAP IN .375 SPACER RICHCO 5
5229 150N 63V 10%CAP T&R RAD .2FLM 4 2024 1/6W 249R 2%FLAME PROOF T&R RES 14 3741 .5 SPACER ID-.171 OD-.25 #912-500 2
5231 220N 63V 5%CAP T&R RAD .2FLM 2 4770 1/4W 249R 1% T&R RES 10 3851 1/2 PCB PLASTIC SPACER 4
5882 220N 250VDC 10%CAP BLK RAD PLY FLM 4 4821 1/4W 470R 5% T&R RES 2 3417 6-32 SCREW TERMINAL PC MNT SNAP-IN 1
5234 470N 63V 10%CAP T&R RAD .2FLM 2 4980 1/4W 470R 5%MINI T&R RES 14 8657 6-32 X 3/8" HEX SPACER ALUMINUM 1
5322 470N 50V 20%CAP T&R BEAD Z5U 2 5019 1/4W 620R 5%MINI T&R RES 2 8629 10-32 X 1/4 SPACER PHENOLIC 8
5257 __2U2 63V 20%CAP T&R RAD .2EL 2 2033 1/6W 1K 2%FLAME PROOF T&R RES 4 8735 0.125 X 0.190 ALUMINUM RIVET 1
5258 __4U7 63V 20%CAP T&R 8X7MM .2EL 2 4623 1/2W 1K 5% T&R RES 2 3502 NYLON FLAT WASHER OD.158ID.110H.070 2
5259 __4U7 63V 20%CAP T&R RAD .2 3 4823 1/4W 1K 5% T&R RES 4 8667 SHOULDER WASHER SWS-229 LENGTH 1/8 4
5282 _10U 16V 20%CAP T&R 5X7MM .2NP 2 4981 1/4W 1K 5%MINI T&R RES 14 3511 #6 FLAT WASHER NYLON 2
5629 _10U 160V 20%CAP BLK 10X13MM EL 4 4998 5.0W 1K2 5% BLK RES 4 8485 #6 SPLIT WASHER ZINC 4
5260 _22U 50V 20%CAP T&R RAD .2EL 12 4624 1/2W 1K5 5% T&R RES 2 8818 3/4 OD X 3/8 ID X .080 THICK WASHER 1
5961 _33U 16V 20%CAP T&R RAD .2IN NP 8 4988 1/4W 1K5 5%MINI T&R RES 4 3517 NYLON WASHER #8 0.062 4
5267 100U 25V 20%CAP T&R RAD .2EL 6 4791 1/4W 1K54 1% T&T RES 4 8491 #10 SPLIT LOCK WASHER BO 2
5897 330U 16V 20%CAP BLK 08X11MM EL 6 5005 2.0W 1K8 5% T&R RES 4 3705 4P3T SLID SW PCMT H 1
5621 470U 63V 20%CAP BLK 12X25MM EL 1 6113 1/4W 2K 5%MINI T&R RES 8 3436 DPDT PUSH SW PCMT H BREAK B4 MAKE 2
5617 3300U 63V 20%CAP BLK 25X31MM ELS 4 5006 1.0W 2K7 5% T&R RES 4 3587 DPDT ROKR SW QUIK 250"AC/PWR ON-OFF 1
5895 6800U 63V 20%CAP BLK 25X50MM 8 6206 1/4W 3K01 1% T&R RES 2 3429 SPDT ROKR SW QUIK 180' AC PWR BL/BL 1
4390 _10K AUD 16MM DETENT P22 2 4826 1/4W 3K3 5% T&R RES 2 CH1198 XFMR:AP2020/V22 1
4524 __4K7 TRIM POT V 2 6136 1/4W 3K3 5%MINI T&R RES 4
3606 12.00 AMP CIRCUIT BREAKER 1 4850 1/4W 3K9 5% T&R RES 1
3759 ___4UH COIL 14AWG ZOBEL VERTICA
L
2 4982 1/4W 4K7 5%MINI T&R RES 24
Table of contents
Other VTC Pro Audio Amplifier manuals
