Vuly Flying Fox User manual

Parts List
1x Bounce Deck
2x Rubber Stopper 2x T-joiner 2x Carabiner 1x Flying Fox
Roller
1x Foam Rope 1x Locking Bolt Set
2x Swing Rail
IMPORTANT:
• Ensure that as you follow these instructions, you firmly secure all parts with nuts and bolts.
• Adult supervision is required at all times whilst equipment is in use. Vuly cares about safety.
MANUALFlying Fox
SAFETY INFORMATION, INSTALLATION, CARE AND MAINTENANCE
INSTRUCTIONS. READ PRIOR TO ASSEMBLING AND USING THE PRODUCT.
Vuly cares about safety. Adult supervision is required at all times whilst
equipment is in use.
Attention! Visit www.vulyplay.com/install
for step by step video instructions,
or scan this QR code:

Slide the Flying Fox Roller over the
completed Flying Fox Rail.
2
STEP
Attach a T-joiner to each end of the Flying Fox Rail.
4
STEP
Thread the foam through the top loop of the
Bounce deck.
6
STEP
Connect the attached Bounce deck onto the Flying Fox Roller, by using one carabiner.
Note: the Bunce deck can be used as Bounce Swing by attaching two carabiners onto Accessory Joiners (sold separately) .
7
STEP
Slide the open end of the T-Joiner over the Quest Rail.
5
STEP
You have attached the Flying Fox to your monkey bar.
CONGRATULATIONS!
Slide 2x Rubber Stoppers at the end of the Flying Fox Rail.
3
STEP
Instructions
Connect 1x Swing Rail 1 to either end of Swing
Rail 2 to form the Flying Fox Rail. Ensure they
are firmly secured with the locking bolt set.
1
STEP