VXI CT-100B Series User manual

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | [e-mail] | www.artisantg.com
SM
View
Instra

bus
CT-100B SERIES
SIX-SLOT VXIBUS CHASSIS
USER’S MANUAL
82-0042-000
Rev. April 7, 2003
VXI Technology, Inc.
2031 Main Street
Irvine, CA 92614-6509
[phone]
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

VXI Technology, Inc.
2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

www.vxitech.com
CT-100B Preface 3
TABLE OF CONTENTS
INTRODUCTION
Certification ....................................................................................................................................................... 4
Warranty ............................................................................................................................................................ 4
Limitation of Warranty ...................................................................................................................................... 4
Restricted Rights Legend ...................................................................................................................................4
DECLARATION OF CONFORMITY .............................................................................................................................. 5
GENERAL SAFETY INSTRUCTIONS............................................................................................................................ 7
Terms and Symbols............................................................................................................................................ 7
Warnings ............................................................................................................................................................ 7
SUPPORT RESOURCES .............................................................................................................................................. 9
SECTION 1 ................................................................................................................................................................. 11
INTRODUCTION ...................................................................................................................................................... 11
Introduction...................................................................................................................................................... 11
General Description ......................................................................................................................................... 12
Backplane......................................................................................................................................................... 12
Performance ..................................................................................................................................................... 12
Flexibility......................................................................................................................................................... 13
CT-100B Series Specifications ........................................................................................................................ 14
Cooling Capacity for CT-100B (Typical) ........................................................................................................ 16
SECTION 2 ................................................................................................................................................................. 19
INSTALLATION ....................................................................................................................................................... 19
Introduction...................................................................................................................................................... 19
Line Voltage Selection..................................................................................................................................... 19
Backplane......................................................................................................................................................... 19
RACK MOUNT OPTION INSTALLATION................................................................................................................... 21
Overview.......................................................................................................................................................... 21
RACK MOUNT KIT INSTALLATION ......................................................................................................................... 22
Required Tools................................................................................................................................................. 22
Parts List .......................................................................................................................................................... 22
Assembly Procedure ........................................................................................................................................ 22
RACK SLIDE INSTALLATION (20” AND 24”) ........................................................................................................... 24
Required Tools................................................................................................................................................. 24
Parts List .......................................................................................................................................................... 24
Assembly Instructions...................................................................................................................................... 24
RACK MOUNT DOOR KIT INSTALLATION............................................................................................................... 26
Required Tools................................................................................................................................................. 26
Parts List .......................................................................................................................................................... 26
Assembly Procedure ........................................................................................................................................ 26
ACRYLIC RACK MOUNT DOOR KIT INSTALLATION ............................................................................................... 28
Required Tools................................................................................................................................................. 28
Parts List .......................................................................................................................................................... 28
Assembly Procedure ........................................................................................................................................ 28
SECTION 3 ................................................................................................................................................................. 31
OPERATION............................................................................................................................................................ 31
Introduction...................................................................................................................................................... 31
INDEX ........................................................................................................................................................................33
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

VXI Technology, Inc.
4 CT-100B Preface
CERTIFICATION
VXI Technology, Inc. (VTI) certifies that this product met its published specifications at the time of shipment from
the factory. VTI further certifies that its calibration measurements are traceable to the United States National
Institute of Standards and Technology (formerly National Bureau of Standards), to the extent allowed by that
organization’s calibration facility, and to the calibration facilities of other International Standards Organization
members.
WARRANTY
The product referred to herein is warranted against defects in material and workmanship for a period of three years
from the receipt date of the product at customer’s facility. The sole and exclusive remedy for breach of any
warranty concerning these goods shall be repair or replacement of defective parts, or a refund of the purchase price,
to be determined at the option of VTI.
For warranty service or repair, this product must be returned to a VXI Technology authorized service center. The
product shall be shipped prepaid to VTI and VTI shall prepay all returns of the product to the buyer. However, the
buyer shall pay all shipping charges, duties, and taxes for products returned to VTI from another country.
VTI warrants that its software and firmware designated by VTI for use with a product will execute its programming
when properly installed on that product. VTI does not however warrant that the operation of the product, or
software, or firmware will be uninterrupted or error free.
LIMITATION OF WARRANTY
The warranty shall not apply to defects resulting from improper or inadequate maintenance by the buyer, buyer-
supplied products or interfacing, unauthorized modification or misuse, operation outside the environmental
specifications for the product, or improper site preparation or maintenance.
VXI Technology, Inc. shall not be liable for injury to property other than the goods themselves. Other than the
limited warranty stated above, VXI Technology, Inc. makes no other warranties, express or implied, with respect to
the quality of product beyond the description of the goods on the face of the contract. VTI specifically disclaims the
implied warranties of merchantability and fitness for a particular purpose.
RESTRICTED RIGHTS LEGEND
Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subdivision (b)(3)(ii) of
the Rights in Technical Data and Computer Software clause in DFARS 252.227-7013.
VXI Technology, Inc.
2031 Main Street
Irvine, CA 92614-6509 U.S.A.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

www.vxitech.com
CT-100B Preface 5
DECLARATION OF CONFORMITY
Declaration of Conformity According to ISO/IEC Guide 22 and EN 45014
MANUFACTURER’S NAME VXI Technology, Inc.
MANUFACTURER’S ADDRESS 2031 Main Street
Irvine, California 92614-6509
PRODUCT NAME Six-Slot VXIbus Chassis
MODEL NUMBER(S) CT-100B
PRODUCT OPTIONS All
PRODUCT CONFIGURATIONS All
VXI Technology, Inc. declares that the aforementioned product conforms to the requirements of
the Low Voltage Directive 73/23/EEC and the EMC Directive 89/366/EEC (inclusive 93/68/EEC)
and carries the “CE” mark accordingly. The product has been designed and manufactured
according to the following specifications:
SAFETY EN61010 (2001)
EMC EN61326 (1997 w/A1:98) Class A
CISPR 22 (1997) Class A
VCCI (April 2000) Class A
ICES-003 Class A (ANSI C63.4 1992)
AS/NZS 3548 (w/A1 & A2:97) Class A
FCC Part 15 Subpart B Class A
EN 61010-1:2001
I hereby declare that the aforementioned product has been designed to be in compliance with the relevant sections
of the specifications listed above as well as complying with all essential requirements of the Low Voltage Directive.
April 2003
_________________________
Jerry Patton, QA Manager
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

VXI Technology, Inc.
6 CT-100B Preface
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

www.vxitech.com
CT-100B Preface 7
GENERAL SAFETY INSTRUCTIONS
Review the following safety precautions to avoid bodily injury and/or damage to the product.
These precautions must be observed during all phases of operation or service of this product.
Failure to comply with these precautions, or with specific warnings elsewhere in this manual,
violates safety standards of design, manufacture, and intended use of the product.
Service should only be performed by qualified personnel.
TERMS AND SYMBOLS
These terms may appear in this manual:
WARNING Indicates that a procedure or condition may cause bodily injury or death.
CAUTION Indicates that a procedure or condition could possibly cause damage to
equipment or loss of data.
These symbols may appear on the product:
ATTENTION - Important safety instructions
Frame or chassis ground
WARNINGS
Follow these precautions to avoid injury or damage to the product:
Use Proper Power Cord To avoid hazard, only use the power cord specified for this
product.
Use Proper Power Source To avoid electrical overload, electric shock, or fire hazard,
do not use a power source that applies other than the
specified voltage.
Use Proper Fuse To avoid fire hazard, only use the type and rating fuse
specified for this product.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

VXI Technology, Inc.
8 CT-100B Preface
WARNINGS (CONT.)
Avoid Electric Shock To avoid electric shock or fire hazard, do not operate this
product with the covers removed. Do not connect or
disconnect any cable, probes, test leads, etc. while they are
connected to a voltage source. Remove all power and
unplug unit before performing any service. Service should
only be performed by qualified personnel.
Ground the Product This product is grounded through the grounding conductor
of the power cord. To avoid electric shock, the grounding
conductor must be connected to earth ground.
Operating Conditions To avoid injury, electric shock or fire hazard:
- Do not operate in wet or damp conditions.
- Do not operate in an explosive atmosphere.
- Operate or store only in specified temperature range.
- Provide proper clearance for product ventilation to
prevent overheating.
- DO NOT operate if any damage to this product is
suspected. Product should be inspected or serviced
only by qualified personnel.
Improper Use The operator of this instrument is advised that if
equipment is used in a manner not specified in this
manual, the protection provided by this equipment be
may be impaired.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

www.vxitech.com
CT-100B Preface 9
SUPPORT RESOURCES
Support resources for this product are available on the Internet and at VXI Technology customer
support centers.
Internet Support
E-mail: [email protected]
Web Address: http://www.vxitech.com
Telephone Support (U.S.)
Tel: [phone] West Coast
[phone] East Coast
Fax: [phone] West Coast
[phone] East Coast
VXI Technology Headquarters
Technical Support
VXI Technology, Inc.
2031 Main Street
Irvine, CA 92614-6509
Tel: [phone]
Fax: [phone]
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com