W Box Technologies WBXCD804RPG User manual

WBXCD804RPG
WBXCD804RPW
WBXCD806RPG
WBXCD806RPW
WBXCL804RPG
WBXCL804RPW
WBXCL806RPG
WBXCL806RPW www.wboxtech.eu

2
The content in this manual is subject to change without notice. Updates will be added to future
versions of this manual.
DISCLAIMER STATEMENT
“Underwriters Laboratories Inc. (“UL”) has not tested the performance or reliability of the security
or signaling aspects of this product. UL has only tested for fire, shock or casualty hazards as
outlined in UL’s Standard(s) for Safety, UL60950-1. UL Certification does not cover the perfor-
mance or reliability of the security or signaling aspects of this product. UL MAKES NO REPRE-
SENTATIONS, WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING THE
PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED FUNC-
TIONS OF THIS PRODUCT.

3
The lightning with an arrowhead symbol, within an equilateral
triangle is intended to alert the users to the presence of un-
insulated “dangerous voltage” within the product’s enclosure that
may be sufficient magnitude to constitute a risk of electric shock
to persons.
The exclamation point with an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
This equipment has been tested and found to comply with limits for a Class A digital
device. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy, if not installed
and used in accordance with the instruction manual, may cause harmful interference
to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
Changes or modifications not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
To prevent electric shock and risk of fire hazards:
●Do NOT use power sources other than that specified.
This installation should be made by a qualified service
person and should conform to all local codes.

4
Warranty
1. Limited Warranty
a. General
Subject to the terms and conditions of this Limited Warranty, from the date of sale by ADI to
the Buyer through the period of time for product categories specified in Section 1(b), ADI
warrants its W Box Technologies products to be free from defects in materials and workman-
ship under normal use and service, normal wear and tear excepted. Except as required by
law, this Limited Warranty is only made to Buyer and may not be transferred to any third
party.
ADI shall have no obligation under this Limited Warranty or otherwise if:
(i) The product is improperly installed, applied or maintained;
(ii) The product is installed outside of stated operating parameters, altered, or improperly
services or repaired;
(iii) Damage is caused by outside natural occurrences, such as lightning, power surges, fire,
floods, acts of nature, or the like
(iv) Defects resulting from unauthorized modification, misuse, vandalism, or other causes
unrelated to defective materials or workmanship, or failures related to batteries of any type
used in connection with the products sold hereunder.
ADI only warrants those products branded as W Box Technologies products and sold by ADI.
Any other products branded by third parties are warranted by the third party manufacturer for
a period as defined by the third party manufacturer, and ADI makes available or assigns to
Buyer those warranties and only those warranties extended by such third party manufacturers
or vendors for non-ADI branded products to the extent that ADI has the right to such warran-
ties or is entitled to assign them. ADI does not itself warrant any non-ADI branded product
and sells only on an as is basis in accordance with ADI’s terms and conditions of sale.

5
b. Specific Warranties for product categories are as follows:
Product Categories Warranty Period
CCTV Power Supplies 24 months
Monitors 30 months
Video Baluns 30 months
Analog Cameras 36 months
DVR's, NVR's (excluding HDD) 60 Months
IP Cameras 60 Months
Racks 60 months
TV Mounts 60 months
Analog Cables Limited Lifetime
B Connectors Limited Lifetime
Extension Cords Limited Lifetime
HDMI Cables Limited Lifetime
Jacks, Cords and Intrusion Communication Accesso-
ries
Limited Lifetime
Patch Cables Limited Lifetime
Wire Ties Limited Lifetime

6
2. EXCLUSION OF WARRANTIES, LIMITATION OF LIABILITY
THERE ARE NO WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, OF MER-
CHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE,
WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. TO THE
FULLEST EXTENT PERMITTED BY LAW, IN NO CASE SHALL ADI BE LIABLE TO
ANYONE FOR ANY (I) CONSEQUENTIAL, INCIDENTAL, INDIRECT, SPECIAL, OR
PUNITIVE DAMAGES, AND (II) ANY LOSS OR CORRUPTION OF DATA, ANY LOSS OF
GOODWILL, REPUTATION, PROFITS, ANTICIPATED PROFITS, REVENUE, BUSINESS,
CONTRACT, USE OF MONEY OR USE OF PRODUCT OR ASSET OR ANY LOSS
ARISING FROM BUSINESS INTERRUPTION (IN EACH CASE WHETHER DIRECT OR
INDIRECT TO THE EXTENT THAT THESE ARE NOT INCLUDED IN (I)) ARISING OUT OF
OR RELATING IN ANY WAY TO THE PRODUCT AND/OR FOR BREACH OF THIS OR
ANY OTHER WARRANTY OR CONDITION, EXPRESS OR IMPLIED, OR UPON ANY
OTHER BASIS OF LIABILITY WHATSOEVER, EVEN IF THE LOSS OR DAMAGE IS
CAUSED BY ADI’S OWN NEGLIGENCE OR FAULT AND EVEN IF ADI HAS BEEN AD-
VISED OF THE POSSIBILITY OF SUCH LOSSES OR DAMAGES. Any product description
(whether in writing or made orally by ADI or ADI’s agents), specifications, samples, models,
bulletin, drawings, diagrams, engineering sheets, or similar materials used in connection
with the Buyer’s order are for the sole purpose of identifying ADI’s products and shall not be
construed as an express warranty or condition. Any suggestions by ADI or ADI’s agents
regarding use, applications or suitability of the products shall not be construed as an ex-
press warranty or condition unless confirmed to be such in writing by ADI. ADI does not
represent that the products it sells may not be compromised or circumvented; that the
products will prevent any personal injury or property loss by burglary, robbery, fire or other-
wise, or that the products will in all cases provide adequate warning or protection. Buyer
understands and will cause its customer to understand that a properly installed and main-
tained product is not insurance or guarantee that such will not cause or lead to personal
injury or property loss.
CONSEQUENTLY TO THE FULLEST EXTENT PERMITTED BY LAW, ADI SHALL
HAVE NO LIABILITY FOR ANY PERSONAL INJURY, PROPERTY DAMAGE OR
OTHER LOSS BASED ON ANY CLAIM AT ALL INCLUDING A CLAIM THAT THE
PRODUCT FAILED TO GIVE WARNING. However, if ADI is held liable whether directly
or indirectly for any loss or damage with respect to the products it sells, regardless of
cause or origin, its maximum liability shall not in any case exceed the purchase price of
the product, which shall be fixed as liquidated damages and not as a penalty and shall be
the complete and exclusive remedy against ADI.

7
FOR THE AVOIDANCE OF DOUBT, ADI DOES NOT SEEK HEREUNDER TO EXCLUDE
OR RESTRICT ITS LIABILITY IN RELATION TO (I) FRAUD, (II) DEATH OR PERSONAL
INJURY DIRECTLY RESULTING FROM ITS NEGLIGENCE OR (III) ANY MATTER IN
RESPECT OF WHICH, BY LAW, IT IS NOT PERMITTED TO RESTRICT ITS LIABILITY.
3. Limitation on Liability to Buyer’s Customers.
Buyer agrees to limit liability to its customers to the fullest extent permitted by law. Buyer
acknowledges that ADI shall only be deemed to give consumers of its products such statutory
warranties as may be required by law and at no time shall Buyer represent to its customers
and/or users of ADI products that ADI provides any additional warranties. By accepting the
products, to the fullest extent permitted by law, Buyer assumes all liability for, and agrees to
indemnity and hold ADI harmless against and defend ADI from, any and all suits, claims,
demands, causes of action and judgments relating to damages, whether for personal injury or
to personal property, suffered by any person, firm, corporation or business association,
including but not limited to, Buyer’s customers and/or users of the products because of any
failure of the products to detect and/or warn of the danger for which the goods were designed
or any other failure of the products whether or not such damages are caused or contributed
to by the sold or point concurring negligence or fault of ADI.
4. Returns
Subject to the terms and conditions listed below, during the applicable warranty period, ADI
will replace Product or provide a credit at purchase at its sole option free of charge any
defective products returned prepaid. Any obligations of ADI to replace Limited Lifetime
warranty products pursuant to this warranty which result from defect are limited to the availa-
bility of replacement product. ADI reserves the right to replace any such products with the
then currently available products, or provide a credit in its sole discretion. In the event Buyer
has a problem with any ADI product, please contact your seller or local ADI branch for return
instructions:
www.adiglobal.com
www.wboxtech.eu
Be sure to have the model number and the nature of the problem available. In the event of
replacement, the return product will be credited to Buyer’s account and a new invoice issued
for the replacement item. ADI reserves the right to issue a credit only in lieu of replacement. If
any W Box Technologies product is found to be in good working order or such product’s
inability to function properly is a result of user damage or abuse, the product will be returned
to Buyer in the same condition as received and Buyer shall be responsible for any return
freight charges.

8
Safety Instructions
BEFORE OPERATING OR INSTALLATING THE UNIT, READ AND
FOLLOW ALL INSTRUCTIONS. AFTER INSTALLATION, RETAIN THE
SAFETY AND OPERATING INSTRUCTIONS.
1. INSTALLATION
Install in accordance with the manufacturers instructions.
Installation and servicing should be performed only by qualified and experienced techni-
cians to conform to all local codes and to maintain your warranty.
Do not install the unit in an extremely hot or humid location, or in a place subject to dust or
mechanical vibration.
2. POWER SOURCES:
This product is configured for 12 VDC only, do not connect to higher voltage. This product
should be operated only from the type of power source indicated on the marking label.
5. Governing Law
This Limited Warranty shall be governed by the laws of England and Wales.
6. Miscellaneous
Where any term of this Limited Warranty is prohibited by such laws, it shall be null and void,
but the remainder of the Limited Warranty shall remain in full force and effect.

9
3. ATTACHMENTS:
Do not use attachments not recommended by the manufacturer as they may result in the
risk of fire, electric shock, or injury to persons.
4. ACCESSORIES:
Only use accessories specified by the manufacturer.
5.CLEANING:
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
6.SERVICING:
Do not attempt to service this unit yourself as opening or removing covers may expose
you to dangerous voltage or other hazards.
Precautions
This camera should be installed by qualified personnel only.
There are no user-serviceable parts inside.
To prevent electric shock and risk of fire hazards:
Do NOT use power sources other than that specified.

10
Regulatory Information
FCC Information
FCC compliance: This equipment has been tested and found to comply with the limits for a digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environ-
ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio com-
munications. Operation of this equipment in a residential area is likely to cause harmful interference
in which case the users will be required to correct the interference at their own expense.
FCC Condition: This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause unde-
sired operation
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and
comply therefore with the applicable harmonized European standards listed under the Low
Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC, the RoHS Directive
2011/65/EU.
Municipal waste in the European Union. For proper recycling, return this product to your
local supplier upon the purchase of equivalent 2012/19/EU (WEEE directive): Products
marked with this symbol cannot be disposed of as unsorted municipal waste in the Euro-
pean Union. For proper recycling, return this product to your local supplier upon the
purchase of equivalent new equipment, or dispose of it at designated collection points. For
more information, see: www.recyclethis.info.
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of
as unsorted municipal waste in the European Union. See the product documentation for
specific battery information. The battery is marked with this symbol, which may include
lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return
the battery to your supplier or to a designated collection point. For more information, see:
www.recyclethis.info.

11
NOTE: Please make certain that all accessories are included before beginning the
installation. Incorrect installation can void the warranty if instructions are not followed
correctly.
Accessories
(A) Wall Plugs S8 x 30mm 4pcs (B) Fitting Screws PA4 x 35mm 4pcs
(C) Allen Key L40X14mm 1pcs (D) Zoom-Focus screw driver 20X25mm 1pcs
Mechanical Drawing
WBXCD806RPG WBXCD806RPW
WBXCD804RPG WBXCD804RPW

12
Appearance Description
Camera Components

13
Before installation, Open a package, take out the camera, unscrew the camera compression
ring, and disassemble the camera.
1. Drill holes on the ceiling or wall, perform positioning of the position of the installation block
with the camera mounting base as reference template, and reserve the cable entries of the
video/power cables. Pic 1
2. Nail swell plastic buttons in to drilled holes, and fix the camera mounting base to the
ceiling (or wall) by use of self-tapping screws. Install the compression ring, the dome shell,
and the dome shell fixed base on the camera mounting base. Pic 2
3. Turn the main body, adjust the lens direction, and note the position of the dome cover
window. Pic 4
4. Adjust view angle and focal length by using an adjusting tool. Pic 5
Installation Information

14
Mechanical Drawing
Accessories
(A) Wall Plugs S8 x 30mm 4pcs (B) Fitting Screws PA4 x 35mm 4pcs
(C) Allen Key L40X14mm 1pcs (D) Zoom-Focus screw driver 20X25mm 1pcs
NOTE: Please make certain that all accessories are included before beginning the installa-
tion. Incorrect installation can void the warranty if instructions are not followed correctly.
WBXCL806RPG WBXCL806RPW
WBXCL804RPG WBXCL804RPW

15
Appearance Description

16
Installation Information
1. Open a package, take out the camera, and unscrew the camera shell.
2. Take out the positioning label delivered with the camera and drill three holes on
the ceiling or wall based on the marks on the positioning label, nail swell plastic
buttons into drilled holes.
3. Connect the multi-connector cable and fix the camera to the ceiling(or wall) by use
of self-tapping screws; Loosen the direction focusing screw, position left-right
up/down to adjust the angle of the camera that the camera faces the monitored
area, then fix the direction focusing screw.
4.Adjust view angle and focal length by using an adjusting tool.
5. Fix the camera shell.

17
Technical Specifications

18
WBXCD804RPG
WBXCD804RPW
WBXCD806RPG
WBXCD806RPW
WBXCL804RPG
WBXCL804RPW
WBXCL806RPG
WBXCL806RPW www.wboxtech.eu

19
Le contenu de ce manuel est sujet à changement sans préavis. Mises à jour seront ajoutées aux
versions futures de ce manuel.
dégagement de responsabilité
«Underwriters Laboratories Inc. (« UL ») n'a pas testé les performances ni la fiabilité des aspects
sécurité ou signalisation de ce produit. UL a seulement testé pour les risques d'incendie, de choc
ou d'accident conformément à la norme (s) de UL pour la sécurité, UL60950-1. La certification UL
ne couvre pas la performance ou la fiabilité des aspects de sécurité ou signalisation de ce
produit. UL EXCLUT TOUTE RESPONSABILITÉ, GARANTIE OU CERTIFICATION, QUANT
AUX performances ou la fiabilité de tout titre ou SIGNALISATION fonctions connexes de ce
produit.

20
La foudre avec une pointe de flèche, dans un triangle équilatéral est
destiné à alerter l'utilisateur de la présence de "tension dangereuse"
non-isolé dans le boîtier de l'appareil, qui peut être suffisante pour
constituer un risque de choc électrique pour les personnes.
Le point d’exclamation dans un triangle équilatéral est destiné à
alerter l'utilisateur de la présence de fonctionnement et d'entretien (de
réparation) importantes dans la documentation accompagnant l'appa-
reil.
Cet équipement a été testé et déclaré conforme aux limites d'un appareil numérique
de classe A. Ces limites sont conçues pour fournir une protection raisonnable contre
les interférences nuisibles lorsque l'équipement est utilisé dans un environnement
commercial. Cet équipement génère, utilise et peut émettre une énergie de fréquence
radio, s'il n'est pas installé et utilisé conformément au manuel d'instruction, il peut
causer des interférences nuisibles aux communications radio.
Le fonctionnement de cet équipement dans une zone résidentielle est susceptible de
provoquer des interférences nuisibles, auquel cas l'utilisateur sera tenu de corriger les
Les changements ou modifications non expressément approuvés par le fabricant
peuvent annuler le droit de l'utilisateur à utiliser l'équipement.
Pour éviter les chocs électriques et les risques d'incendie:
●NE PAS utiliser des sources d'énergie autres que celle spécifiée.
Cette installation doit être effectuée par un technicien
qualifié et doit être conforme à tous les codes locaux.