Walker 42-inch Setup guide

Deck and Carrier Frame Assemblies (36”, 42”, 48”, 52”, 56”, 62” & 74”)
Effective Date: P/N 5000-17
07-01-06
ILLUSTRATED
PARTS MANUAL

Use only genuine Walker®replacement parts. Effective Date 07-01-06
KEY TO ABBREVIATIONS USED IN THIS MANUAL
º (Dimension) ....................................................................................................................................Degrees (Angle)
" (Dimension) ....................................................................................................................................................inches
(-) ...................................................................................................................................................Negative (Polarity)
(+).................................................................................................................................................... Positive (Polarity)
AT................................................................................................................................................................All-Terrain
CCW ..............................................................................................................................................Counter-clockwise
Conn. ..........................................................................................................................................................Connector
CW..............................................................................................................................................................Clockwise
D ...................................................................................................................................................................Diameter
DGHS......................................................................Deck, Grass Handling System (number refers to size in inches)
DML ............................................................................................... Deck, Mulching (number refers to size in inches)
DSD ..................................................................................... Deck, Side Discharge (number refers to size in inches)
DU...................................................................................................................................................Garlock (Bearing)
ESNA (Fastener).........................................................................................................................Nylon Insert Locknut
FSC........................................................................................................................................ Forward Speed Control
GA.....................................................................................................................................................................Gauge
gal. .....................................................................................................................................................................gallon
GHS .......................................................................................................................................Grass Handling System
GR (Fastener)................................................................................................................................................... Grade
HP...........................................................................................................................................................Horse Power
HT .......................................................................................................................................................... Heat-Treated
ID ..............................................................................................................................Identification or Inside Diameter
L....................................................................................................................................................................... Length
LH ..........................................................................................................Left Hand (orientated with operator on seat)
LP...............................................................................................................................................................Low Profile
mm (Dimension).........................................................................................................................................millimeters
MS (Fastener).....................................................................................................................................Machine Screw
NS (as part number)................................................................................... Item is not sold by Walker Manufacturing
OD................................................................................................................................................... Outside Diameter
oz. ......................................................................................................................................................................ounce
PFH (Fastener) ............................................................................................................................... Phillips Flat Head
P/N..........................................................................................................................................................Part Number
PPH (Fastener)...............................................................................................................................Phillips Pan Head
PTH (Fastener) .............................................................................................................................Phillips Truss Head
PTO.....................................................................................................................................................Power Take-Off
QKS ..........................................................................................................................................................Quick Slide
qt.........................................................................................................................................................................quart
RH....................................................................................................... Right Hand (orientated with operator on seat)
SAE (Fastener) ....................................................................................................... Society of Automotive Engineers
SBH (Fastener)..................................................................................................................Socket Button Head (Bolt)
SD.......................................................................................................................................................Side Discharge
SFH (Fastener) ................................................................................................................................Slotted Flat Head
SHC (Fastener)...............................................................................................................................Socket Head Cap
SHL (Fastener) ................................................................................................................................... Shoulder (Bolt)
SM (Fastener).............................................................................................................................Sheet Metal (Screw)
S/N....................................................................................................................................................... Serial Number
Spg....................................................................................................................................................................Spring
SQH (Fastener)......................................................................................................................................Square Head
SS (Fastener).......................................................................................................................................Stainless Steel
ST (Fastener).............................................................................................................................Self-Tapping (Screw)
Term...............................................................................................................................................................Terminal
V...........................................................................................................................................................................Volts
NOTE: In some instances, combinations of abbreviations may be used (e.g. PPHMS - Phillips Pan Head Machine Screw).
Abbreviation What it Represents

1
Effective Date 07-01-06 Use only genuine Walker®replacement parts.
Decals & Paint
Deck Decals / Touch-Up Paint ................................2
Deck and Carrier Frame Assemblies
36 Inch Complete Carrier Frame Assembly ............4
DGHS36 Deck Assembly ........................................6
DSD36 Deck Assembly ...........................................8
42 Inch Complete Carrier Frame Assembly ..........10
DGHS42 Deck Assembly ......................................12
DSD42 Deck Assembly .........................................14
DML42A Deck Assembly ......................................16
48 Inch Complete Carrier Frame Assembly ..........18
DGHS48 Deck Assembly ......................................20
DSD48 Deck Assembly .........................................22
52 Inch Complete Carrier Frame Assembly ..........24
DSD52 Deck Assembly .........................................26
Mulching Kit (For DSD52 Deck Assembly) ...........28
56 Inch Complete Carrier Frame Assembly ..........30
DSD56 Deck Assembly .........................................32
62 Inch Complete Carrier Frame Assembly ..........34
DSD62 Deck Assembly .........................................36
74 Inch Complete Carrier Frame Assembly ..........38
DSD74 Deck Assembly .........................................40
Maintenance
Optional Break-Away Blades ................................ 42
Blade Usage Chart ................................................ 43
Deck Weldment Replacement Parts ..................... 44
Deck Height Adjuster Kit ....................................... 46
Lubrication Points ................................................. 48
Fastener Loctite®Application &
Torque Instructions ......................................... 50
Maintenance And Service Record Sheet .............. 52
Deck / Tractor Compatibility Chart ........................ 52
Warranty
Limited Warranty ................................................... 53
ILLUSTRATED PARTS LIST
Section of Mower Covered Page Section of Mower Covered Page

2
I T E M P A R T D E S C R I P T I O N L O C AT I O N N O . N O .
NO. NO. REQ’D. GHS REQ’D SD
Use only genuine Walker®replacement parts. Effective Date 07-01-06
DECK DECALS / TOUCH-UP PAINT
DSD52 And DSD62 Deck Decals
1 8653 Caution, Pivot Joint Carrier Frame 0 2
2 8748 Cutting Height Adjustment Footrest Pulley Guard 0 1
3 8746 Universal Joint Lube Mount Bracket/PTO Guard 0 1
4 5846 Grease Fitting Deck Cover Plate 0 3
5 5808-1 Danger, Rotating Blades Cover Plate (one on each end) 0 2
6 8647 Danger, Tilt-Up Carrier Frame 0 1
7 8653-1 Transport Warning Deck Housing, Front 0 1
8 8732 Decal (52") Deck Housing, Front 0 1
9 5809 Walker Mower Logo (3") Carrier Frame, Front 0 1
10 8734 Drive Belt Routing Underneath Deck Cover Plate 0 1
11 5848 Danger, Side Discharge Shield Side Discharge Shield 0 1
12 5808 Danger, Rotating Blades (62" Deck) Deck Housing (one on each end) 0 2
13 8750 Decal (62") Deck Housing, Front 0 1
14 8749 Drive Belt Routing Underneath Deck Cover Plate 0 1
15 8746-1 Decal, Tele PTO Shaft U-Joint Shaft Assembly 0 1
36", 42", 48" & 56" Deck Decals
1 8653 Caution, Pivot Joint Carrier Frame 2 2
4 5846 Grease Fitting Deck Cover Plate 1 1
6 8647 Danger, Tilt-Up Carrier Frame 1 1
7 8653-1 Transport Warning Deck Housing, Front 0 1
9 5809 Walker Mower Logo (3") Carrier Frame, Front 1 1
11 5848 Danger, Side Discharge Shield Side Discharge Shield 0 1
12 5808 Danger, Rotating Blades Deck Housing (one on each end) 2 2
16 6875 PTO Alignment Arrow Universal Joint Shaft Assembly 1 1
17 5807-3 Cutting Height Adjustment Gearbox Cover 1 1
18 5865 Blade Mounting Torque Carrier Frame 1 1
19 6789 Decal (56") Deck Housing, Front 0 1
DSD74 Deck Decals
1 8653 Caution, Pivot Joint Carrier Frame 0 2
5 5808-1 Danger, Rotating Blades Deck Housing (one on each end) 0 2
6 8647 Danger, Tilt-Up Carrier Frame 0 1
7 8653-1 Transport Warning Deck Housing, Front 0 1
9 5809 Walker Mower Logo (3") Carrier Frame, Front 0 1
11 5848 Danger, Side Discharge Shield Side Discharge Shield 0 1
16 6875 PTO Alignment Arrow Universal Joint Shaft Assembly 0 1
17 5807-3 Cutting Height Adjustment Middle Gearbox Cover 0 1
18 5865 Blade Mounting Torque Carrier Frame 0 1
20 7689 Decal (74") Deck Housing, Front 0 1
Touch-Up Paint
21 5866 Touch-Up Paint, Yellow (12 oz. Aerosol)
NOTE: All parts requiring decals are shipped with decals applied.

3
Effective Date 07-01-06 Use only genuine Walker®replacement parts.
DECK DECALS / TOUCH-UP PAINT
E
VERY
GREASE
H
RS.
5846
25
E
VERY
GREASE
H
RS.
5846
25
E
VERY
GREASE
H
RS.
5846
25
E
VERY
GREASE
H
RS.
5846
25
E
VERY
GREASE
H
RS.
5846
25
18
18
12
9
17
12
16
11 18
9
17
12
16
12
DeckAssemblies
DSD52 & DSD62
DeckAssemblies
DSD48 & DSD56
DSD36, DSD42,
DeckAssemblies
DML42A& DGHS48
DGHS36, DGHS42,
6
6
1
1
1
21
1
1
4
9
10,14
315
5,12
4
4
11
11
8,13
5,12
5
5
7
7
7
19
DSD74
DeckAssembly
6
2
17
16
9
4
6
20
1
1
14

4
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D ITEM PART DESCRIPTION NO. NO. NO. REQ’D
Use only genuine Walker®replacement parts. Effective Date 07-01-06
36 INCH COMPLETE CARRIER FRAME ASSEMBLY (P/N 5710-4)
Spring and Pivot Mount Components
1 5975-3 Cable Tie (50# x 7") 4
2 5744-1 Spring Clip Bracket 1
3 5743-1 Spring Cover 2
4 8667-10 Pivot Mount, LH/Adj. 1
5 5830-3 Grease Fitting (45 Degree) 4
6 8667-20 Pivot Mount, RH/Adj. 1
7 5743-4 Eyebolt (3/8-16 x 2-3/4) 2
8 5743-6 Extension Spring (1-1/2 7-3/4) 2
(Includes Items # 1, F117 & F166)
Carrier Frame Components
9 8674-11 Lever, Deck Lock, LH 1
10 7406-1 Handle Grip (Red) 2
11 8669 Lift Handle 1
12 5748-10 Rubber Mat (1-1/2 x 6) 2
13 5740-2 Deck Pin Bushing (5/8) 4
14 5708-6 36" Carrier Frame (Less Pivots) 1
(Includes Item # 12)
5708-1 36" Carrier Frame w/Forks (Less Pivots) *
(Includes Items # 12, 21-23, 25,
F055, F068 & F098)
15 8674-10 Lever, Deck Lock, RH 1
16 5830 Grease Fitting 6
Caster Wheel Components
17 5714-7 Bearing Cap 4
18 5714-5 Bearing, Caster Wheel 2
19 5715-4 Caster Wheel, Pneumatic (8 x 3.00-4) 2
(Includes Items # 5,17 & 18)
5715-10 Tire, Pneumatic (8 x 3.00-4) *
5715-9 Tire Tube, Pneumatic (2.80/2.50-4) *
5715-3 Caster Wheel & Tire (8 x 3.00-4) **
5715-11 Tire, Caster Wheel/No-Flat (8 x 3.00-4) **
20 5714-3 Axle Spacer Tube 2
21 5770-1 Caster Wheel Fork 2
22 8768-1 Seal (1-3/4 x 1-1/8) 2
23 8037 Bearing, Cone (3/4 ID) 4
24 8769-1 Bearing Cup (1-3/4 x 1-7/16) 4
25 8769-9 Dust Cap 2
Fasteners
F012 3/8-16 Keps Nut 2
F014 3/8-16 ESNA Nut 2
F020 5/16-18 ESNA Nut 2
F047 3/8-16 x 4-1/2 Hex Bolt 2
F055 5/8 SAE Washer 2
F068 1/8 x 1 Cotter Pin 2
F084 5/16 Wave Spring Washer 2
F098 5/8-18 Slotted Hex Nut 2
F117 Retainer Ring 2
F123 1" External Snap Ring 4
F166 Retainer Ring 2
F226 5/16-18 x 7/8 Hex Bolt 2
F317 3/16 x 1 Split Spring Pin 4
F335 3/8-16 x 7/8 Set Screw, SS 2
F336 3/8-16 Jam Nut 2
*Service Part Only
** May be ordered as a factory-installed option or as a kit for
dealer installation. Contact your Walker dealer.
NOTE: When installing Item # 8 on decks prior to S/N DX-62875,
the swivel hook end should be attached tothe deck carrier
frame.

5
Effective Date 07-01-06 Use only genuine Walker®replacement parts.
36 INCH COMPLETE CARRIER FRAME ASSEMBLY (P/N 5710-4)
F098
F055
F068
23
22
21
F047
17
17
19
20
518
F226
F084
F020
11
F012
F020
F084
F226
F123
16
16
12
10
13
15 F317
F317
F317
F317
10
13
2
7
6
8
4
9
5
1
3
7
F014
F335
F336
F166
F117
Refer to DGHS36
DECK ASSEMBLY, Page 6
Refer to DSD36
DECK ASSEMBLY, Page 8
14
24
24
25
23
Refer to LUBRICATION POINTS, Page 48.

6
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D ITEM PART DESCRIPTION NO. NO. NO. REQ’D
Use only genuine Walker®replacement parts. Effective Date 07-01-06
DGHS36 DECK ASSEMBLY (P/N 5710-15)
INCL. OPTIONAL HEAVY DUTY GEARBOXES
Gearbox and Drive Components
1 8618-1 Cover, PTO Shaft Guard 1
2 8619-2 PTO Shaft Guard 1
8618-3 PTO Shaft Guard Assembly *
(Includes Items # 1, 2, F002 & F025)
3 5285-15 U-Joint Shaft Assy, 90 Degree, Spline 1
(Includes Items # 24, F069 & F295)
4 7275-16 U-Joint Tube Assy, Spline 1
5 5275-15 U-Joint Tube Assy (9.5" OAL), Spline 1
(Includes Item # F076)
6 5704-40 Gearbox and Tube Assembly 1
(Includes Items # 12-19, F124, F136,
F179, F211 & F226)
5704-45 Heavy Duty Gearbox and Tube Assembly **
(Includes Items # 12-16, 18-20, F136,
F179, F211 & F226)
7 5794 Discharge Chute (6-1/2 Diameter) 1
(Includes Items # 10, 11, F223 & F224)
5794-1 Discharge Chute Assembly with *
Spring Mount
(Includes Items # 6, 7, 10, 11, F223 & F224)
8 8678 Spring Mount, Chute 1
9 8677 Extension Spring(1 x 6-1/16) 1
10 5726 Chute Hinge (2 x 8) 1
11 5755 Chute Lower Lip 1
12 6054 Spline Coupling 3
13 P007 Gasket, Cap (Peerless #788030) 4
14 5061 Gearbox Connector Tube (6-11/16) 1
15 6732-2 Connecting Shaft (4-1/8) 1
16 5052-1 Gearbox (LH Rotation) 2
5052-5 Heavy Duty Gearbox (LH Rotation) **
17 5706-4 Seal Protector Plate 3
18 5704-1 Gearbox Cover Support 2
19 5051-16 Tee Gearbox, Shear 1
5051-6 Heavy Duty Tee Gearbox, Shear **
20 5060 Gearbox Connector Tube (2-5/16) 1
21 5052-3 1.375 x .750 x .187 Washer 4
22 5747-11 Rubber Mat (3 x 6) 2
23 5746-4 36" Gearbox Cover (Includes Item # 22) 1
24 8067-13 Shear Pin w/Cotter (Set of 5) *
(Includes Item # F069)
25 5830 Grease Fitting 1
Deck Housing Components
26 8670 Tilt-Up Hook 1
27 5162-11 Roller Wheel (5" Poly) 2
(Includes Item # F059)
28 8490 Roller Wheel Axle Bolt 2
29 5710-16 36 GHS Deck Housing 1
(Includes Items # 35 & 36)
30 NS Deck Serial Number Plate 1
31 5705-0 Blade, 20" (RH Rotation) 1
32 5705-2 Blade, 20" (LH Rotation) 1
5705-6 36 GHS Blade Set W/Hubs *
(Includes Items # 31-33, F002 & F202)
33 5706 Blade Hub & Trash Guard 2
34 7775-1 Hitch Pin, LH (Silver) #6 2
35 8735-10 Rubber Mat (5 x 6) 2
36 8788-1 Rubber Mat (1 x 2) 1
37 7775-2 Hitch Pin, RH (Gold) #6 2
38 5727-1 Washer Shim (5/8 ID) 4
Fasteners
F002 10-24 Keps Nut 9
F004 1/4-20 Keps Nut 2
F005 1/4-20 ESNA Nut 2
F013 3/8-16 Whiz Locknut 6
F018 5/8-18 Hex Nut 2
F025 10-24 x 3/8 PPHMS 2
F029 1/4-20 x 1/2 Hex Bolt 2
F036 1/4-20 x 1/2 SBH Screw 2
F038 3/8-16 x 1 Hex Bolt 4***
F039 3/8-16 x 1-1/4 Hex Bolt 4
F050 1/4 SAE Washer 4
F055 5/8 SAE Washer 2
F056 5/8 Split Lock Washer 2
F059 3/8 Wave Spring Washer 2
F069 3/32 x 1/2 Cotter Pin 1
F076 3/8-16 x 5/8 SQH Set Screw *
F087 #10 x 7/8 Fender Washer 2
F124 10-32 x 3/8 Taptite Machine Screw 9
F129 10-24 x 1/2 PTHMS 3
F136 AN960C416L Washer 16
F179 1/4-20 x 1 Hex Bolt 4
F202 10-24 x 5/8 SHC Screw, GR5 SS 4
F206 #2 x 3/16 Drive Pin 2
F211 1/4-20 x 7/8 Hex Bolt 16
F223 3/16 x 5/16 Semi-Tube Rivet *
F224 3/16 x 7/16 Semi-Tube Rivet *
F229 C-Clip (13/16) 2
F246 1/4-20 x 1/2 PTHMS 2
F278 3/8 Split Lock Washer 4***
F295 3/16 x 1-1/2 Split Spring Pin 1
F403 1/4-20 x 1/2 PTHMS SS 2
*Service Part Only
** Item(s) used on the Heavy Duty version of standard gear-
boxes. The Heavy Duty cast iron gearboxes are interchange-
able with Standard aluminum gearboxes.
*** Used on Heavy Duty gearbox configuration.
NOTE: Order Item # 4 to use the splined deck PTO shaft with
Model MT, MD and MC.
NOTE: Order Item # 5 to use the splined deck PTO shaft with
Model MS and MB.

7
Effective Date 07-01-06 Use only genuine Walker®replacement parts.
DGHS36 DECK ASSEMBLY (P/N 5710-15)
INCL. OPTIONAL HEAVY DUTY GEARBOXES
Refer to FASTENER LOCTITE APPLICATION &
TORQUE INSTRUCTIONS, Page 50.
F002
F002
F005
F223
F224
F013
F059
F013
F018
F025
F029
F002
F036
F039
F050
F056
F055
F069
F076
F087
F124
F129
F136
F202
F002
F211
F229
F229
F295
4
35
25
16 24
10
11
17
16
87
9
13
13
14 13
13
12
12
12
27
27 28
15
31
33
32
29
34
36
37
32
38
19
20
22
23
21
1
2
Refer to 36 INCH
CARRIER FRAMEASSEMBLY,
Page 4
35
35
18
F136
F179
18
F246
F050
F206
30
26
F004
F403
6
Hardware Used on
Heavy Duty Gearboxes
F038
F278
21
Refer to LUBRICATION POINTS, Page 48.

8
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D ITEM PART DESCRIPTION NO. NO. NO. REQ’D
Use only genuine Walker®replacement parts. Effective Date 07-01-06
DSD36 DECK ASSEMBLY (P/N 5710-17)
INCL. OPTIONAL HEAVY DUTY GEARBOXES
Gearbox and Drive Components
1 8618-1 Cover, PTO Shaft Guard 1
2 8619-2 PTO Shaft Guard 1
8618-3 PTO Shaft Guard Assembly *
(Includes Items # 1, 2, F002 & F025)
3 5285-15 U-Joint Shaft Assy, 90 Degree, Spline 1
(Includes Items # 21, F069 & F295)
4 7275-16 U-Joint Tube Assy, Spline 1
5 5275-15 U-Joint Tube Assy (9.5" OAL), Spline 1
(Includes Item # F076)
6 5704-43 Gearbox and Tube Assembly 1
(Includes Items # 7-16, F124,
F136, F179 & F211)
5704-46 Heavy Duty Gearbox and Tube Assembly **
(Includes Items # 7, 9-16, F136,
F179 & F211)
7 5704-1 Gearbox Cover Support 2
8 5706-4 Seal Protector Plate 3
9 6054 Spline Coupling 3
10 P007 Gasket, Cap (Peerless #788030) 4
11 5061 Gearbox Connector Tube (6-11/16) 1
12 6732-2 Connecting Shaft (4-1/8) 1
13 5052-1 Gearbox (LH Rotation) 1
5052-5 Heavy Duty Gearbox (LH Rotation) **
14 5051-16 Tee Gearbox, Shear 1
5051-6 Heavy Duty Tee Gearbox, Shear **
15 5060 Gearbox Connector Tube (2-5/16) 1
16 5053-1 Gearbox (RH Rotation) 1
5053-5 Heavy Duty Gearbox (RH Rotation) **
17 5052-3 1.375 x .750 x .187 Washer 4
18 5747-11 Rubber Mat (3 x 6) 2
19 5746-4 36" Gearbox Cover 1
(Includes Item # 18)
20 5830 Grease Fitting 1
21 8067-13 Shear Pin w/Cotter (Set of 5) *
(Includes Item # F069)
Deck Housing Components
22 8670 Tilt-Up Hook 1
23 5162-11 Roller Wheel (5" Poly) 2
(Includes Item # F059)
24 8490 Roller Wheel Axle Bolt 2
25 5710-18 36 SD Deck Housing 1
(Includes Items # 23, 24, 29 & 31)
26 NS Deck Serial Number Plate 1
27 5705-1 Blade, 20" (RH Rotation) 2
5705-5 36 SD Blade Set W/Hubs *
(Includes Items # 27, 28, F002 & F202)
28 5706 Blade Hub & Trash Guard 2
29 8735-10 Rubber Mat (5 x 6) 2
30 7775-1 Hitch Pin, LH (Silver) #6 2
31 8788-1 Rubber Mat (1 x 2) 1
32 7775-2 Hitch Pin, RH (Gold) #6 2
33 5709-2 36/42 SD Discharge Shield 1
34 5727-1 Washer Shim (5/8 ID) 4
Fasteners
F002 10-24 Keps Nut 6
F004 1/4-20 Keps Nut 2
F013 3/8-16 Whiz Locknut 6
F014 3/8-16 ESNA Nut 2
F018 5/8-18 Hex Nut 2
F025 10-24 x 3/8 PPHMS 2
F029 1/4-20 x 1/2 Hex Bolt 2
F038 3/8-16 x 1 Hex Bolt 4***
F039 3/8-16 x 1-1/4 Hex Bolt 6
F050 1/4 SAE Washer 4
F055 5/8 SAE Washer 2
F056 5/8 Split Lock Washer 2
F059 3/8 Wave Spring Washer 4
F069 3/32 x 1/2 Cotter Pin 1
F076 3/8-16 x 5/8 SQH Set Screw *
F124 10-32 x 3/8 Taptite Machine Screw 9
F136 AN960C416L Washer 20
F179 1/4-20 x 1 Hex Bolt 4
F202 10-24 x 5/8 SHC Screw, GR5 SS 4
F206 #2 x 3/16 Drive Pin 2
F211 1/4-20 x 7/8 Hex Bolt 16
F229 C-Clip (13/16) 2
F246 1/4-20 x 1/2 PTHMS 2
F278 3/8 Split Lock Washer 4***
F295 3/16 x 1-1/2 Split Spring Pin 1
F403 1/4-20 x 1/2 PTHMS SS 2
*Service Part Only
** Item(s) used on the Heavy Duty version of standard gear-
boxes. The Heavy Duty cast iron gearboxes are interchange-
able with Standard aluminum gearboxes.
*** Used on Heavy Duty gearbox configuration.
NOTE: Order Item # 4 to use the splined deck PTO shaft with
Model MT, MD, MC and MW.
NOTE: Order Item # 5 to use the splined deck PTO shaft with
Model MS and MB.

9
Effective Date 07-01-06 Use only genuine Walker®replacement parts.
DSD36 DECK ASSEMBLY (P/N 5710-17)
INCL. OPTIONAL HEAVY DUTY GEARBOXES
Refer to FASTENER LOCTITE APPLICATION &
TORQUE INSTRUCTIONS, Page 50.
F013
F059
F013
F018
F025
F029
F002
F039
F050
F056
F055
F069
F076
F124
F136
F202
F002
F206
F039
F059
F014
33
26
34 F211
F229
F229
F295
4
35
20
16 21
8
13
10
10
11 10
10
9
9
9
12
14
15
18
17
19
1
2
Refer to 36 INCH
CARRIER FRAMEASSEMBLY,
Page 4
23
23 24
32
29
29 25
27
27
28
28
30
31
F246
F050
F136
F179
7
76
22
F004
F403
Hardware Used on
Heavy Duty Gearboxes
F038
F278
17
Refer to LUBRICATION POINTS, Page 48.

10
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D ITEM PART DESCRIPTION NO. NO. NO. REQ’D
Use only genuine Walker®replacement parts. Effective Date 07-01-06
42 INCH COMPLETE CARRIER FRAME ASSEMBLY (P/N 5700-11)
Spring and Pivot Mount Components
1 5975-3 Cable Tie (50# x 7") 4
2 5744-1 Spring Clip Bracket 1
3 5743-1 Spring Cover 2
4 5743-3 Eyebolt (3/8-16 x 2) 2
5 8667-10 Pivot Mount, LH/Adj. 1
6 8667-20 Pivot Mount, RH/Adj. 1
7 5830-3 Grease Fitting (45 Degree) 4
8 5743-6 Extension Spring (1-1/2 x 7-3/4) 2
(Includes Items # 1, F117 & F166)
Carrier Frame Components
9 8674-11 Lever, Deck Lock, LH 1
10 7406-1 Handle Grip (Red) 2
11 8669 Lift Handle 1
12 5748-10 Rubber Mat (1-1/2 x 6) 2
13 5740-2 Deck Pin Bushing (5/8) 4
14 8660-13 42" Carrier Frame (Less Pivots) 1
(Includes Item # 12)
8660-12 42" Carrier Frame w/Forks (Less Pivots) *
(Includes Items # 12, 21-23, 25,
F055, F068 & F098)
15 8674-10 Lever, Deck Lock, RH 1
16 5830 Grease Fitting 6
Caster Wheel Components
17 5714-7 Bearing Cap 4
18 5714-5 Bearing, Caster Wheel 2
19 5715-4 Caster Wheel, Pneumatic (8 x 3.00-4) 2
(Includes Items # 7, 17 & 18)
5715-10 Tire, Pneumatic (8 x 3.00-4) *
5715-9 Tire Tube, Pneumatic (2.80/2.50-4) *
5715-3 Caster Wheel & Tire (8 x 3.00-4) **
5715-11 Tire, Caster Wheel/No-Flat (8 x 3.00-4) **
20 5714-3 Axle Spacer Tube 2
21 5770-1 Caster Wheel Fork 2
22 8768-1 Seal (1-3/4 x 1-1/8) 2
23 8037 Bearing, Cone (3/4 ID) 4
24 8769-1 Bearing Cup (1-3/4 x 1-7/16) 4
25 8769-9 Dust Cap 2
Fasteners
F012 3/8-16 Keps Nut 2
F014 3/8-16 ESNA Nut 2
F020 5/16-18 ESNA Nut 2
F047 3/8-16 x 4-1/2 Hex Bolt 2
F055 5/8 SAE Washer 2
F068 1/8 x 1 Cotter Pin 2
F084 5/16 Wave Spring Washer 2
F098 5/8-18 Slotted Hex Nut 2
F117 Retainer Ring 2
F123 1" External Snap Ring 4
F166 Retainer Ring 2
F226 5/16-18 x 7/8 Hex Bolt 2
F317 3/16 x 1 Split Spring Pin 4
F335 3/8-16 x 7/8 Set Screw, SS 2
F336 3/8-16 Jam Nut 2
*Service Part Only
** May be ordered as a factory-installed option or as a kit for
dealer installation. Contact your Walker dealer.
NOTE: When installing Item # 8 on decks prior to S/N DX-62875,
the swivel hook end should be attached tothe deck carrier
frame.

11
Effective Date 07-01-06 Use only genuine Walker®replacement parts.
42 INCH COMPLETE CARRIER FRAME ASSEMBLY (P/N 5700-11)
F098
F055
F068
23
22
21
24
24
25
23
F117
F335
F336
32
8
10
Refer to DGHS42
DECKASSEMBLY,
Page 12
16 F226
F226
F084
F084
11
F020
F020
F012
F123
F047
17 20
19 718 17
13 14 10 15 F317
F317
16
4
12
F317
F317
9
5
4
76
1
1
3
F166
F014
Refer to DSD42
DECKASSEMBLY,
Page 14 Refer to LUBRICATION POINTS, Page 48.

12
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D ITEM PART DESCRIPTION NO. NO. NO. REQ’D
Use only genuine Walker®replacement parts. Effective Date 07-01-06
DGHS42 DECK ASSEMBLY (P/N 5705)
INCL. OPTIONAL HEAVY DUTY GEARBOXES
Gearbox and Drive Components
1 8618-1 Cover, PTO Shaft Guard 1
2 8619 PTO Shaft Guard 1
8618 PTO Shaft Guard Assembly *
(Includes Items # 1, 2, F002 & F025)
3 5285-15 U-Joint Shaft Assy, 90 Degree, Spline 1
(Includes Items # 26, F069 & F295)
4 7275-16 U-Joint Tube Assy, Spline 1
5 5275-15 U-Joint Tube Assy (9.5" OAL), Spline 1
(Includes Item # F076)
6 5704-50 Gearbox and Tube Assembly 1
(Includes Items # 12-21, F124, F136,
F179 & F211)
5704-8 Heavy Duty Gearbox and Tube Assembly **
(Includes Items # 12-16, 18-21, F136,
F179 & F211)
7 5794 Discharge Chute (6-1/2 Diameter) 1
(Includes Items # 9, 11, F223 & F224)
5794-1 Discharge Chute Assembly with
Spring Mount *
(Includes Items # 6, 7, 10, 11, F223 & F224)
8 8678 Spring Mount, Chute 1
9 8677 Extension Spring(1 x 6-1/16) 1
10 5726 Chute Hinge (2 x 8) 1
11 5755 Chute Lower Lip 1
12 6054 Spline Coupling 4
13 P007 Gasket, Cap (Peerless #788030) 4
14 5063 Gearbox Connector Tube (8-5/8) 1
15 6732-3 Connecting Shaft (6-1/4) 1
16 5052-1 Gearbox (LH Rotation) 2
5052-5 Heavy Duty Gearbox (LH Rotation) **
17 5706-4 Seal Protector Plate 2
18 5704-1 Gearbox Cover Support 2
19 5051-16 Tee Gearbox, Shear 1
5051-6 Heavy Duty Tee Gearbox, Shear **
20 6732-1 Connecting Shaft (2") 1
21 5062 Gearbox Connector Tube (4-3/8) 1
22 5052-3 1.375 x .750 x .187 Washer 4
23 5747-11 Rubber Mat (3 x 6) 2
24 5785-5 42" Gearbox Cover (Includes Item # 23) 1
25 5830 Grease Fitting 1
26 8067-13 Shear Pin w/Cotter (Set of 5) *
(Includes Item # F069)
Deck Housing Components
27 8670 Tilt-Up Hook 1
28 5162-11 Roller Wheel (5" Poly) 2
(Includes Item # F059)
29 8490 Roller Wheel Axle Bolt 2
30 NS Deck Serial Number Plate 1
31 5705-3 Blade, 22" (RH Rotation) 1
32 5706 Blade Hub & Trash Guard 2
33 5705-4 Blade, 22" (LH Rotation) 1
5705-8 42 GHS Blade Set with Hubs *
(Includes Items # 31-33, F002 & F202)
34 8735-10 Rubber Mat (5 x 6) 2
35 7775-1 Hitch Pin, LH (Silver) #6 2
36 8788-1 Rubber Mat (1 x 2) 1
37 5704-4 42 GHS Deck Housing 1
(Includes Items # 34 & 36)
38 7775-2 Hitch Pin, RH (Gold) #6 2
39 5727-1 Washer Shim (5/8 ID) 4
Fasteners
F002 10-24 Keps Nut 9
F004 1/4-20 Keps Nut 2
F005 1/4-20 ESNA Nut 2
F013 3/8-16 Whiz Locknut 6
F018 5/8-18 Hex Nut 2
F025 10-24 x 3/8 PPHMS 2
F029 1/4-20 x 1/2 Hex Bolt 2
F036 1/4-20 x 1/2 SBH Screw 2
F038 3/8-16 x 1 Hex Bolt 4***
F039 3/8-16 x 1-1/4 Hex Bolt 4
F050 1/4 SAE Washer 4
F055 5/8 SAE Washer 2
F056 5/8 Split Lock Washer 2
F059 3/8 Wave Spring Washer 2
F069 3/32 x 1/2 Cotter Pin 1
F076 3/8-16 x 5/8 SQH Set Screw *
F087 #10 x 7/8 Fender Washer 2
F124 10-32 x 3/8 Taptite Machine Screw 6
F129 10-24 x 1/2 PTHMS 3
F136 AN960C416L Washer 20
F179 1/4-20 x 1 Hex Bolt 4
F202 10-24 x 5/8 SHC Screw, GR5 SS 4
F206 #2 x 3/16 Drive Pin 2
F211 1/4-20 x 7/8 Hex Bolt 16
F223 3/16 x 5/16 Semi-Tube Rivet *
F224 3/16 x 7/16 Semi-Tube Rivet *
F229 C-Clip (13/16) 4
F246 1/4-20 x 1/2 PTHMS 2
F278 3/8 Split Lock Washer 4***
F295 3/16 x 1-1/2 Split Spring Pin 1
F403 1/4-20 x 1/2 PTHMS SS 2
*Service Part Only
** Item(s) used on the Heavy Duty version of standard gear-
boxes. The Heavy Duty cast iron gearboxes are interchange-
able with Standard aluminum gearboxes.
*** Used on Heavy Duty gearbox configuration.
NOTE: Order Item # 4 to use the splined deck PTO shaft with
Model MT, MD and MC.
NOTE: Order Item # 5 to use the splined deck PTO shaft with
Model MS.

13
Effective Date 07-01-06 Use only genuine Walker®replacement parts.
DGHS42 DECK ASSEMBLY (P/N 5705)
INCL. OPTIONAL HEAVY DUTY GEARBOXES
27
F004
F403
Refer to FASTENER LOCTITE APPLICATION &
TORQUE INSTRUCTIONS, Page 50.
F013
F039
16
2223
24
19
12
25
F295
3
26
F069
F124
17
16
F136 F211 14
21
39
F076
4
5
F013
F013
F059
F229 12
F229
F229
F229
13
13 20
15 13
13
12
28
29
28
F018
F056
F055
F202
F002
38
34
34
32
31
32
33
35
36
37
F025
F029
F002
F050
1
2
12
Refer to 42 INCH
CARRIER FRAMEASSEMBLY,
Page 10
F246
F050
F136
F179
18
18
F002
F002
F005
F223
F224
F036
F087
F129
10
11
8
6
9
7
Hardware Used on
Heavy Duty Gearboxes
F038
F278
22 F206
30
Refer to LUBRICATION POINTS, Page 48.

14
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D ITEM PART DESCRIPTION NO. NO. NO. REQ’D
Use only genuine Walker®replacement parts. Effective Date 07-01-06
DSD42 DECK ASSEMBLY (P/N 5707-10)
INCL. OPTIONAL HEAVY DUTY GEARBOXES
Gearbox and Drive Components
1 8618-1 Cover, PTO Shaft Guard 1
2 8619 PTO Shaft Guard 1
8618 PTO Shaft Guard Assembly *
(Includes Items # 1, 2, F002 & F025)
3 5285-15 U-Joint Shaft Assy, 90 Degree, Spline 1
(Includes Items # 22, F069 & F295)
4 7275-16 U-Joint Tube Assy, Spline 1
5 5275-15 U-Joint Tube Assy (9.5" OAL), Spline 1
(Includes Item # F076)
6 5704-51 Gearbox and Tube Assembly 1
(Includes Items # 7-17, F124, F136,
F179 & F211)
5704-54 Heavy Duty Gearbox and Tube Assembly **
(Includes Items # 8-17, F136, F179 & F211)
7 5706-4 Seal Protector Plate 3
8 6054 Spline Coupling 4
9 P007 Gasket, Cap (Peerless #788030) 4
10 5063 Gearbox Connector Tube (8-5/8) 1
11 6732-3 Connecting Shaft (6-1/4) 1
12 5052-1 Gearbox (LH Rotation) 1
5052-5 Heavy Duty Gearbox (LH Rotation) **
13 5704-1 Gearbox Cover Support 2
14 5051-16 Tee Gearbox, Shear 1
5051-6 Heavy Duty Tee Gearbox, Shear **
15 6732-1 Connecting Shaft (2") 1
16 5062 Gearbox Connector Tube (4-3/8) 1
17 5053-1 Gearbox (RH Rotation) 1
5053-5 Heavy Duty Gearbox (RH Rotation) **
18 5052-3 1.375 x .750 x .187 Washer 4
19 5747-11 Rubber Mat (3 x 6) 2
20 5785-5 42" Gearbox Cover 1
(Includes Item # 19)
21 5830 Grease Fitting 1
22 8067-13 Shear Pin w/Cotter (Set of 5) *
(Includes Item # F069)
Deck Housing Components
23 8670 Tilt-Up Hook 1
24 5162-11 Roller Wheel (5" Poly) 2
(Includes Item # F059)
25 8490 Roller Wheel Axle Bolt 2
26 NS Deck Serial Number Plate 1
27 5705-3 Blade, 22" (RH Rotation) 2
5705-7 42 SD Blade Set with Hubs *
(Includes Items # 27, 28, F002 & F202)
28 5706 Blade Hub & Trash Guard 2
29 7775-1 Hitch Pin, LH (Silver) #6 2
30 8735-10 Rubber Mat (5 x 6) 2
31 8788-1 Rubber Mat (1 x 2) 1
32 5703-3 42 SD Deck Housing 1
(Includes Items # 30 & 31)
33 7775-2 Hitch Pin, RH (Gold) #6 2
34 5709-2 36/42 Discharge Shield 1
35 5727-1 Washer Shim (5/8 ID) 4
Fasteners
F002 10-24 Keps Nut 6
F004 1/4-20 Keps Nut 2
F013 3/8-16 Whiz Locknut 6
F014 3/8-16 ESNA Nut 2
F018 5/8-18 Hex Nut 2
F025 10-24 x 3/8 PPHMS 2
F029 1/4-20 x 1/2 Hex Bolt 2
F038 3/8-16 x 1 Hex Bolt 4***
F039 3/8-16 x 1-1/4 Hex Bolt 6
F050 1/4 SAE Washer 4
F055 5/8 SAE Washer 2
F056 5/8 Split Lock Washer 2
F059 3/8 Wave Spring Washer 4
F069 3/32 x 1/2 Cotter Pin 1
F076 3/8-16 x 5/8 SQH Set Screw *
F124 10-32 x 3/8 Taptite Machine Screw 9
F136 AN960C416L Washer 20
F179 1/4-20 x 1 Hex Bolt 4
F202 10-24 x 5/8 SHC Screw, GR5 SS 4
F206 #2 x 3/16 Drive Pin 2
F211 1/4-20 x 7/8 Hex Bolt 16
F229 C-Clip (13/16) 4
F246 1/4-20 x 1/2 PTHMS 2
F278 3/8 Split Lock Washer 4***
F295 3/16 x 1-1/2 Split Spring Pin 1
F403 1/4-20 x 1/2 PTHMS SS 2
*Service Part Only
** Item(s) used on the Heavy Duty version of standard gear-
boxes. The Heavy Duty cast iron gearboxes are interchange-
able with Standard aluminum gearboxes.
*** Used on Heavy Duty gearbox configuration.
NOTE: Order Item # 4 to use the splined deck PTO shaft with
Model MT, MD, MC and MW.
NOTE: Order Item # 5 to use the splined deck PTO shaft with
Model MS and MB.

15
Effective Date 07-01-06 Use only genuine Walker®replacement parts.
DSD42 DECK ASSEMBLY (P/N 5707-10)
INCL. OPTIONAL HEAVY DUTY GEARBOXES
13
F136
F179
13
23
F004
F403
Refer to FASTENER LOCTITE APPLICATION &
TORQUE INSTRUCTIONS, Page 50.
F013
F039
17
1819
20
14
8
21 F295
3
22
F069
F124
7
12
F136 F211 10
16
35
F014
F076
4
5
F013
F013
F059
F229 8
F229
F229
F229
9
915
11 9
9
8
24
25
24
F018
F056
F055
F202
F002
33
F059
34
F039
30
30
28
27
28
27
29
31
32
F025
F029
F002
F050
1
2
8
Refer to 42 INCH
CARRIER FRAMEASSEMBLY,
Page 10
F246
F050
F206
26
6
Hardware Used on
Heavy Duty Gearboxes
F038
F278
18
Refer to LUBRICATION POINTS, Page 48.

16
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D ITEM PART DESCRIPTION NO. NO. NO. REQ’D
Use only genuine Walker®replacement parts. Effective Date 07-01-06
DML42A DECK ASSEMBLY (P/N 5707-1)
Gearbox and Drive Components
1 8618-1 Cover, PTO Shaft Guard 1
2 8619 PTO Shaft Guard 1
8618 PTO Shaft Guard Assembly *
(Includes Items # 1, 2, F002 & F025)
3 5285-15 U-Joint Shaft Assy, 90 Degree, Spline 1
(Includes Items # 21, F069 & F295)
4 7275-16 U-Joint Tube Assy, Spline 1
5 5275-15 U-Joint Tube Assy (9.5" OAL), Spline 1
(Includes Item # F076)
6 5704-55 42" Mulch Gearbox 1
Tube Assembly, Cast Iron
(Includes Items # 7-16, F136, F179 & F229)
7 6054 Spline Coupling 4
8 P007 Gasket, Cap (Peerless #788030) 4
9 5063 Gearbox Connector Tube (8-5/8) 1
10 6732-3 Connecting Shaft (6-1/4) 1
11 5052-8 Heavy Duty Gearbox (LH Rotation) 1
12 5704-1 Gearbox Cover Support 2
13 5051-6 Heavy Duty Tee Gearbox, Shear 1
14 6732-1 Connecting Shaft (2") 1
15 5062 Gearbox Connector Tube (4-3/8) 1
16 5053-8 Heavy Duty Gearbox (RH Rotation) 1
17 5052-3 1.375 x .750 x .187 Washer 4
18 5747-11 Rubber Mat (3 x 6) 2
19 5785-5 42" Gearbox Cover 1
(Includes Item # 18)
20 5830 Grease Fitting 1
21 8067-13 Shear Pin w/Cotter (Set of 5) *
(Includes Item # F069)
Deck Housing Components
22 8670 Tilt-Up Hook 1
23 9772 Roller Wheel Assembly (2-1/2) 2
(Includes Item # F059)
24 8490 Roller Wheel Axle Bolt 2
25 NS Deck Serial Number Plate 1
26 5705-28 Blade 22" Mulch 2
5705-19 DML42A Blade Set W/Hubs *
(Includes Items # 27, F002 & F202)
27 5706 Blade Hub & Trash Guard 2
28 8735-10 Rubber Mat (5 x 6) 2
29 7775-1 Hitch Pin, LH (Silver) #6 2
30 8788-1 Rubber Mat (1 x 2) 1
31 5701-11 DML42A Deck Housing 1
(Includes Items # 28 & 30)
32 7775-2 Hitch Pin, RH (Gold) #6 2
33 5727-1 Washer Shim (5/8 ID) 4
Fasteners
F002 10-24 Keps Nut 6
F004 1/4-20 Keps Nut 2
F013 3/8-16 Whiz Locknut 2
F018 5/8-18 Hex Nut 2
F025 10-24 x 3/8 PPHMS 2
F029 1/4-20 x 1/2 Hex Bolt 2
F038 3/8-16 x 1 Hex Bolt 4
F050 1/4 SAE Washer 4
F056 5/8 Split Lock Washer 2
F059 3/8 Wave Spring Washer 2
F069 3/32 x 1/2 Cotter Pin 1
F076 3/8-16 x 5/8 SQH Set Screw *
F136 AN960C416L Washer 16
F179 1/4-20 x 1 Hex Bolt 4
F202 10-24 x 5/8 SHC Screw, GR5 SS 4
F206 #2 x 3/16 Drive Pin 2
F211 1/4-20 x 7/8 Hex Bolt 12
F229 C-Clip (13/16) 4
F246 1/4-20 x 1/2 PTHMS 2
F278 3/8 Split Lock Washer 4
F295 3/16 x 1-1/2 Split Spring Pin 1
F403 1/4-20 x 1/2 PTHMS SS 2
*Service Part Only
NOTE: Order Item # 4 to use the splined deck PTO shaft with
Model MT, MD, MC and MW.
NOTE: Order Item # 5 to use the splined deck PTO shaft with
Model MS and MB.

17
Effective Date 07-01-06 Use only genuine Walker®replacement parts.
DML42A DECK ASSEMBLY (P/N 5707-1)
F136F179
12
12
F038
F278 17
16
18
19
13
11 6
F025
F029
F002
F050
1
2
F246
F050
20
F295
3
21
F069
F076
4
5
Refer to 48 INCH
CARRIER FRAMEASSEMBLY,
Page 19
33
32
26
F018
F056
F002
31
28
29
22
F004
F403
F206
25
7
F136
F013
F211 9
23
15
24
F059
F229 7
F229
F229
F229
8
814
10 8
8
7
7
26
27
27
F202
30 28
Refer to LUBRICATION POINTS, Page 48.

18
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D ITEM PART DESCRIPTION NO. NO. NO. REQ’D
Use only genuine Walker®replacement parts. Effective Date 07-01-06
48 INCH COMPLETE CARRIER FRAME ASSEMBLY (P/N 7700-2)
Spring and Pivot Mount Components
1 5975-3 Cable Tie (50# x 7") 4
2 5744-1 Spring Clip Bracket 1
3 5743-1 Spring Cover 2
4 5743-3 Eyebolt (3/8-16 x 2) 2
5 5830-3 Grease Fitting (45 Degree) 4
6 8667-10 Pivot Mount, LH/Adj/ 1
7 8667-20 Pivot Mount, RH/Adj. 1
8 5743-6 Extension Spring (1-1/2 x 7-3/4) 2
(Includes Items # 1, F117 & F166)
Carrier Frame Components
9 8674-11 Lever, Deck Lock, LH 1
10 7406-1 Handle Grip (Red) 2
11 8669 Lift Handle 1
12 5748-10 Rubber Mat (1-1/2 x 6) 2
13 5740-2 Deck Pin Bushing (5/8) 4
14 8661-2 48" Carrier Frame 1
(Includes Item # 12)
8661-1 48" Carrier Frame w/Forks *
(Includes Items # 12, 21-23, 25,
F055, F068 & F098)
15 8674-10 Lever, Deck Lock, RH 1
16 5830 Grease Fitting 6
Caster Wheel Components
17 5714-7 Bearing Cap 4
18 5714-5 Bearing, Caster Wheel 2
19 5715-4 Caster Wheel, Pneumatic (8 x 3.00-4) 2
(Includes Items # 5, 17 & 18)
5715-10 Tire, Pneumatic (8 x 3.00-4) *
5715-9 Tire Tube, Pneumatic (2.80/2.50-4) *
5715-3 Caster Wheel & Tire (8 x 3.00-4) **
5715-11 Tire, Caster Wheel/No-Flat (8 x 3.00-4) **
20 5714-3 Axle Spacer Tube 2
21 5770-1 Caster Wheel Fork 2
22 8768-1 Seal (1-3/4 x 1-1/8) 2
23 8037 Bearing, Cone (3/4 ID) 4
24 8769-1 Bearing Cup (1-3/4 x 1-7/16) 4
25 8769-9 Dust Cap 2
Fasteners
F012 3/8-16 Keps Nut 2
F014 3/8-16 ESNA Nut 2
F020 5/16-18 ESNA Nut 2
F047 3/8-16 x 4-1/2 Hex Bolt 2
F055 5/8 SAE Washer 2
F068 1/8 x 1 Cotter Pin 2
F084 5/16 Wave Spring Washer 2
F098 5/8-18 Slotted Hex Nut 2
F117 Retainer Ring 2
F123 1" External Snap Ring 4
F166 Retainer Ring 4
F226 5/16-18 x 7/8 Hex Bolt 2
F317 3/16 x 1 Split Spring Pin 4
F335 3/8-16 x 7/8 Set Screw, SS 2
F336 3/8-16 Jam Nut 2
*Service Part Only
** May be ordered as a factory-installed option or as a kit for
dealer installation. Contact your Walker dealer.
NOTE: The 48 Inch Carrier Frame is also used on the DML42A
Mulching Deck (5707-1).