
Introduction to Parts
Operations
1. Press the lantern switch button to make the lantern glow. Use the same button to control its
brightness as follows:
2. Press the mosquito killer switch button to turn on/o the mosquito/bug killing mode. When this
mode is on, any incoming bugs/mosquitoes will be killed at the Mosquito Killer Grids.
1
2
3
4
6
7
Hanger
Mosquito Killer Switch
Lantern Switch
Micro USB Charging Port
Charging Status Indicator
5Ultraviolet LED
Mosquito Killer Grid
Note: Please ensure you fully charge the Bug Zapper Light before using it for the rst time.
Note: The Ultraviolet LED will light up blue when this mode is activated.
To charge the Bug Zapper Light, attach one end of the Micro USB cable to the Bug Zapper Light and the
other end to a power outlet. The charging indicator located at the top of the UV LED inside, will turn red
when charging and turns green after being fully charged.
20% 50% 100%
OFF
Press once Press twice Press three
times
Press four
times