Wasserstein Wall Plate for Blink Video Doorbell User manual

Wall Plate for Blink
Video Doorbell
USER MANUAL

In the Box
Safety Information
• Read these instructions carefully before use. Failure to follow the
safety instructions may cause injury or damage to your property.
• Small parts contained in the box can be a choking hazard. Keep small
parts away from children.
• Only use this mount with the Blink Video Doorbell.
Page 1
2 x wall anchors
2 x mount screws
1 x wall plate

Page 2
Note: before you install the wall mount, take down your Blink Video
Doorbell if it is already installed. Detach the doorbell backplate using
the opening key that comes with it.
How to Install

Page 3
1. Place the backplate in the middle of the wall plate. Line up the holes
on the top and bottom.
2. Attach the wall plate and backplate to the wall using the screws
and anchors provided. The drill bit size is 1/8 in. If your doorbell is
hardwired, make sure that the wires go through the cutout and are
connected to the backplate before mounting.

Specifications
Material:
Dimensions:
Cutout dimensions:
ABS plastic
3.1 x 6.4 x 0.2 in
1.7 x 0.6 in
Page 4
3. Hook the doorbell to the backplate. Press the top in first, then firmly
press the bottom in until it clicks.

Blink Video Doorbell is not included.
Blink is the trademark of Immedia Semiconductor, LLC
Wasserstein is a trademark of Dropcases Ltd.
Wasserstein is not affiliated with
Immedia Semiconductor, LLC Made in China
www.wasserstein-home.com
Scan the QR code below or email us at [email protected].
Get More Support