Wasserstein Wall Plate for Wyze Video Doorbell Pro User manual

Wall Plate for Wyze
Video Doorbell Pro
User Manual

In the Box
Safety Information
• Read these instructions carefully before use.
Failure to follow the safety instructions may cause
injury and damage to your property.
• Small parts contained in the box can be a
choking hazard. Keep small parts away from
children.
• Only use this wall plate with the Wyze Video
Doorbell Pro.
2 x mount screws
1 x wall plate
2 x wall anchors
Page 1

Page 2
Pre-Installation
1. Turn off the power of your existing video
doorbell at the electrical panel.
Note: Always consult a professional electrician
before working with electrical wires.
2. Remove your existing video doorbell (if any)
from the wall.
Installation
1. Place the doorbell backplate on top of the wall
plate and screw them both onto the wall (drill
size is 1/8 in).

Page 3
2. If you have a wired doorbell, connect the wires
first before securing it to the wall plate.
3. Turn on the doorbell. Hook the tabs at the back
and press firmly on wall plate until it clicks into
place.
4. Check the view from the App, then secure the
doorbell with a screw at the bottom.

Page 4
Installation with Angle Mount
1. Screw the wall plate and angle mount together
onto the wall (drill size is 1/8 in).
2. Screw the doorbell's backplate onto the angle
mount using the original screws that come with
the doorbell.

Page 5
4. Turn on the doorbell. Hook the tabs at the back
and press firmly until it clicks into place.
5. Check the view from the App, then secure the
doorbell with a screw at the bottom.
3. If you have a wired doorbell, connect the wires
first before securing it to the wall plate.

Scan the QR code below or email us at:
[email protected]
Wyze Video Doorbell Pro is not included.
Wyze Video Doorbell Pro is a trademark of Wyze Labs, Inc.
Wasserstein is not affiliated with Wyze Labs, Inc.
Wasserstein is a trademark of Dropcases Ltd.
Get More Support
Specifications
Compatibility:
Dimensions:
Wyze Video Doorbell Pro
7.28 x 3.54 x 0.30 in