WataSensor WALERT User manual

Page 1 of 21
WALERTTM User's Manual
iOS Devices
1/15/2016
The World First 3D Spatial Security Device for Homes
WALERTTM
Version 1.0
© Copyright WataSensor, Inc. 2014
All Rights Reserved.
WALERT is a trademark of WataSensor, Inc. Google and Gmail are trademarks of Google Inc.
in the United States and other countries. All other trademarks are the property of their
respective owners.
All information in this document is subject to change without notice. The information contained
in this document does not affect aJile Systems’ product specification or warranties. Nothing in
this document shall operate as license or is with express or implied warranty.
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS”
BASIS. In no event will aJile Systems be liable for damages arising directly or indirectly from
any use of the information contained in this document.

Page 2 of 21
Table of Contents
WALERTTM User's Manual..................................................1
1.Overview ...........................................................................3
1.1 Warranty............................................................................................................................................................ 4
2. Setup and configuration.................................................5
2.1 WALERT Client Application Installation Procedure......................................................................... 5
3. Operation .......................................................................13
3.1 WAlert home page....................................................................................................................................... 13
3.2 Alerts................................................................................................................................................................. 14
3.2 Viewing Missed Alerts................................................................................................................................ 15
3.3 Settings............................................................................................................................................................ 17
Appendix A ........................................................................19
FAQs......................................................................................................................................................................... 19
Trouble Shooting.................................................................................................................................................. 20

Page 3 of 21
1.Overview
The WAlert™ is the world first 3D spatial home security device that is easy to set up using
Smartphone, and simple to use, and requires no installation, no monthly service, and no
contract.
The WAlert is based on a unique patented intrusion sensing technology that can detect
intrusion into a house with a floor space up to 2000 SQ, without the installation of any wired or
wireless door/window contacts or glass break sensors. Upon detection of an intrusion, a siren is
triggered to deter the intruder, and a notification is sent over the Internet to the owner’s smart
phone via broadband network. It's a compact and streamlined device, can be plugged into
power outlet anywhere in your house. It provides you a peace of mind, and seamlessly interacts
with your smart phone, and tablets over Internet anytime and anywhere.
WALERT Device
The WALERT consists of the following components:
1. WALERT device
2. Quick Start Guide

Page 4 of 21
1.1 Warranty
WataSensor Products warrants to you, the original purchaser of this Product, that this
product shall be free of defects in material or workmanship for the Warranty Period of one
(1) year as follows:
1. LABOR: During the Warranty Period if this Product is determined to be defective, WataSensor will
repair or replace the Product, at its option at no charge, or pay the labor charges to any aJile
authorized service facility. After the Warranty Period, you must pay for all labor charges.
2. PARTS: In addition, aJile will supply, at no charge, new or rebuilt replacement parts in exchange
for defective parts for the Warranty Period. After the Warranty Period, you must pay all parts
costs.
To obtain warranty service, you must take the Product with your original receipt or other
proof of purchase, either in its original packaging or packaging affording an equal degree of
protection, to your nearest retail store location of the store or online web site from which you
purchased the Product.
This warranty does not cover cosmetic damage or damage due to acts of God, lightning
strikes, accident, misuse, abuse, negligence, commercial use, or modification of, or to any
part of the Product, including the antenna. This warranty does not cover damage due to
improper operation or maintenance, connection to improper voltage supply, or attempted
repair by anyone other than a facility authorized by aJile to service the Product. This
warranty does not cover Products sold AS IS or WITH ALL FAULTS, or consumables (such
as fuses or batteries). This warranty is valid only in the United States and Canada.
This warranty is invalid if the factory applied serial number has been altered or removed
from the Product.
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER. WataSensor SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON
THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED
WARRANTY, REPRESENTATION OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF
THIS WARRANTY.
Some states or provinces do not allow the exclusion or limitation of incidental or
consequential damages, or allow limitations on how long an implied warranty lasts, so the
above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may have other rights which vary from
state to state, or province to province.
For customer service please call 1-408-557-0829
www.watasensor.com
WataSensor Inc, San Jose, California, U.S.A.

Page 5 of 21
2. Setup and configuration
2.1 WALERT Client Application Installation Procedure
1. For iOs devices, download the WALERT app for
free from App Store
a. Open the App Store app and search for “WAlert"
and download WAlert app.
b. Launch WAlert app from the iPhone’s app
screen. Upon launching the WAlert app, the WAlert
home screen appears as shown at the right.
2. Tap "Sign up" icon for new users to create a new
user account, otherwise tap "SIGN IN " (user account
is already created). The "Create account" screen
pops up as shown on the right. Users need to create
a free account associated with the WAlert device on
the WAlert cloud based server as follows:
a. User Name
Enter a user name
b. Password
Enter a password
c. Reenter Password
Enter the same created password
d. Device Serial Number
Scan QR code printed on the back of WAlert
device.
f. Tap "SIGN UP' icon

Page 6 of 21
If the registration is successful, the "Login" screen
pops up with the registered user name and
associated password.
b. Tap "SIGN IN" icon to login the cloud based
WAlert server. If the login is successful, the home
page pops up with the blue ring as shown below.
This indicates that WAlert app has successfully
connected with the WAlert cloud- based server.
Note:
Each ring is associated with a connected WAlert
device, when multiple WAlert devices are deployed in
a premise.

Page 7 of 21
3. Go to step 4, if the WAlert device has already
setup with the current router under the same user
name (device has been unplugged and re-plugged.
Tap to open the menu as shown to right.
a. Tap Add Device. The Add device screen pops up
to guide users through 4-step process to setup the
Wi-Fi network
b. Tap blinking scan icon. This scans the serial
number printed on the back side of WAlert device.
c. Enter a name where the WAlert device is deployed
as shown below. Continue to the step 4

Page 8 of 21
4. Plug the WAlert device into a power outlet.
One beep indicates that WAlert has previously setup
and reestablished the connection with server. The
setup is completed and the WAlert device is
ready for operation. The home screen pops up
and the circle is green. Otherwise continue to step
2 with the two beeps
5. Press and hold for 3 seconds the Setup button
located at the lower right side of the WAlert device.
Wait for the three short beeps and continue to the
step 6
6.Tap blinking > , the "Connect WAlert wifi" window
pops up as shown below.
7. Tap "Settings" to switch to the "Setting mode" of
iOS device as shown below

Page 9 of 21
Tap "Settings" to select Wi-Fi network
Tap " Wi-Fi" to select WAlert ad-hoc Wi-Fi network
as shown below

Page 10 of 21
Tap "Back to WAlert" on top let corner to switch back
to WAlert client as shown below
The "Step 3" window pops up with SSID of the home
Wi-Fi.
Enter password associated with the home router
Tap blinking "Setup device" icon

Page 11 of 21
The Finish window pops up. It shows the network
setup for WAlert is completing.

Page 12 of 21
C. Wait for four beeps, signals that the WAlert
device has successfully connected with the selected
router and WAlert cloud-based server. The WAlert
home page pops up with the green ring as below.
This indicates that the WAlert device and user's
Smartphone are connected to the same router. The
two beeps signals that WAlert device has not been
setup successfully, in this case, go back to step 3
and try to setup again.
Notes:
Some Android devices won't connect to the ad hoc
network created by the WAlert device but will
connect to 3/4G for data transfer. Users need to
manually disable the 3/4G data mode during the
WAlert setup. Thereafter the 3/4G data mode can be
re-enabled after the setup is completed.

Page 13 of 21
3. Operation
3.1 WAlert home page
The home page always shows the current deployment of the connected WAlert device in a
premise.

Page 14 of 21
3.2 Alerts
Alerts are sent to the smart phone when the WALERT device detects door/windows open. The
phone will vibrate upon receiving the notification and an “WALERT Alert” icon will appear on the
WALERT home page.
Once the door is opened, a siren is triggered, and
alert is captured. The red circle is blinking.

Page 15 of 21
Tap the red circle
It shows the list of alerts associated dates and times
when the alerts have happened. Users have two
options either make a phone call for help or open the
networked IP camera to monitor.
1. Tap to makes a phone call for help.
2. Tap to open the installed IP camera for
monitoring
3.2 Viewing Missed Alerts
Tap the green circle
The settings page pop up as shown in the right side.

Page 16 of 21
Tap
The History page pops up. It shows a list of missing
alerts with the associated date and time.

Page 17 of 21
3.3 Settings
Tap the green circle
The WALERT Settings screen pops up and shows the
available configurable options:
1. Sensitivity level
2. Buzzer
oDuration in seconds
oOn/off
3. Software update
4. Room name
5. Tap blinking to saved the new configuration
6. Remove this device. The device should be removed
when it is moved to a new location with a different Wi-
Fi network or router.

Page 18 of 21
Tap Sign out under menu bar.

Page 19 of 21
Appendix A
FAQs
Can user use multiple smart phones with a single WALERT device?
Yes. The client app is free and a single WALERT device can be connected with multiple smart
phones using the same registered user name and associated password.
How many WA device can be deployed per home?
It is dependent on house type. The WataSensor security solution can support up to five (5)
WALERT devices.
Does the pet's movement cause any false alert with the WALERT device?
No. The WALERT's unique patented sensing technology is designed and optimized specifically
to detect the door/window opens only.
How is WALERT powered? What happens in case of power outage?
The WALERT device is powered by an internal AC adapter. For home deployment, the AC
adapter is plugged into the wall, and the WALERT device is powered by AC.
What voltage does WALERT support?
WALERT comes with an AC power adapter to plug WALERT device into the wall. The AC
power adapter is an international switching power supply capable of 100 ~ 220V and 50/60 Hz.
Which smart phones does WALERT work with?
Currently WALERT supports Android (version 4. xxx and above), iOS smart phones and tables
and Windows PC's as follows:
Can user turn WALERT device off (privacy mode)?
Yes. privacy and security go hand in hand. User has full control of security and privacy. User
can arm and disarm WALERT device
How secure is the WALERT platform?
A bank-level security has been implemented. All communications between your WALERT
device, cloud based server and your smart phones are encrypted over SSL (HTTPS).

Page 20 of 21
Trouble Shooting
Setup process issue
1. Enter the password of the home router.
2. Tap the blinking
3. The home page pops up as shown below, the color of the circle stays blue instead of
changing to green. The device generates two short beeps, that WAlert device has not
been setup successfully.
Resolution
In this case, users need to go back to the step 3 or exit the app and restart the setup sequence
again. Otherwise try the following steps
Step 1: Ensure the Android smart phone is connected to the home router again. Thereafter
the Wi-Fi connection can be checked by surfing Internet using Browser.
Step 2: Restart the WALERT app on WALERT device as follows:
a. Touch the Settings icon on a Home or All Apps screen.