Waters New Ace User manual

Jug - 1 pc
Upper Filter Holder - 1 pc &
Micro cotton Pad Holder - 1pc
Funnel - 1pc
Product Manual
Cap - 1 pc
Main Filter - 1 pc &
Silicon Ring (O-ring) 1 pc
Extra Micro cotton
Pad Holder - 2pc Micro Cotton Pad
- 80 pc
Upper Filter
4 pc
Manual
Product Composition
Product Manual
New Ace
Waters Alkaline Mineral
Ace
New
New Ace
270 mm
255 X115 mm
1,073g
?
SAN
(Styrene Acrylonitrile Copolymers)
Outlet Cover
Cover
Cap
Date Indicator Wheel
Cover Frame
Micro Cotton Pad Holder
Micro Cotton Pad
Upper Filter Holder
Upper Filter
Funnel
Silicon Ring (O-Ring)
Main Filter
Jug
Structure
Special Reminders
Specication
Product lifespan
1. Be sure to replace the lters immediately after (or shortly before) indicated
lifespan.
2. Do not leave the product near re, stove, sunlight, heat and etc.
3. It would be ne to put the product into the refrigerator to make the cool
water. But do not use hot water or any kind of beverage to the product.
4. Do not store the ltered water in aluminum ware or copper ware.
5. Keep the product clean.
6. Whenever replace the lters, lter the tap water through the lters and empty
out 2~3 complete jugs before use.
7. If the product has not been used for 7 days or more, please empty the pot and
rell 2 times, before reusing.
8. In case the lter is clogged, remove the air inside of lter by washing water
through lter.
9. When the water level of jug is full, do not pour the water into the funnel
additionally.
10. When washing the product, use the soft fabric or soft brush to avoid any
small scratches.
Product name
Height
Length and Width
Weight
Maximum ltering capacity per each day
Plastic material of Jug
*?
Name of lter
Main lter
Upper lter
Micro cotton pad
Lifespan
? months
? months
? days or when it get dirty

Jug - 1 pc
Upper Filter Holder - 1 pc &
Micro cotton Pad Holder - 1pc
Funnel - 1pc
Product Manual
Cap - 1 pc
Main Filter - 1 pc &
Silicon Ring (O-ring) 1 pc
Extra Micro cotton
Pad Holder - 2pc Micro Cotton Pad
- 80 pc
Upper Filter
4 pc
Manual
Product Composition
Product Manual
New Ace
Waters Alkaline Mineral
Ace
New
New Ace
270 mm
255 X115 mm
1,073g
?
SAN
(Styrene Acrylonitrile Copolymers)
Outlet Cover
Cover
Cap
Date Indicator Wheel
Cover Frame
Micro Cotton Pad Holder
Micro Cotton Pad
Upper Filter Holder
Upper Filter
Funnel
Silicon Ring (O-Ring)
Main Filter
Jug
Structure
Special Reminders
Specication
Product lifespan
1. Be sure to replace the lters immediately after (or shortly before) indicated
lifespan.
2. Do not leave the product near re, stove, sunlight, heat and etc.
3. It would be ne to put the product into the refrigerator to make the cool
water. But do not use hot water or any kind of beverage to the product.
4. Do not store the ltered water in aluminum ware or copper ware.
5. Keep the product clean.
6. Whenever replace the lters, lter the tap water through the lters and empty
out 2~3 complete jugs before use.
7. If the product has not been used for 7 days or more, please empty the pot and
rell 2 times, before reusing.
8. In case the lter is clogged, remove the air inside of lter by washing water
through lter.
9. When the water level of jug is full, do not pour the water into the funnel
additionally.
10. When washing the product, use the soft fabric or soft brush to avoid any
small scratches.
Product name
Height
Length and Width
Weight
Maximum ltering capacity per each day
Plastic material of Jug
*?
Name of lter
Main lter
Upper lter
Micro cotton pad
Lifespan
? months
? months
? days or when it get dirty
4/1
1
2
3
4
5
6
1 2 3
1 2
45 6
How to assemble and use
When opening the
cap, if you open the
front side of cap rst
as indicated by arrow
on the picture, you
could open the cap
more easily.
※
Rinse the cap, funnel, and jug separately as shown above picture.
※The upper lter holder doesn’t
need to be soaked. Rinse it with
the clean water.
Take out 1pc of upper lter and 1 pc of main lter from the lter box, and
soak them in the water container for about 10 minutes. Rinse the upper lter
holder with clean water.
After 10 minutes soaking, take out the main lter from the water container
rst, and wash it by ltering water through the lter until no black or white
small particles coming out from the lter. After washing, install it to the funnel
as shown above. And then, install the assembled funnel to the jug.
When closing the cap, close
the cap by assembling the joint
area rst as indicated
by arrow on the picture.
After 10 minutes soaking, take out the upper lter from the water container,
and wash it again by ltering water through the lter until no black or white
small particles coming out from the lter. After washing, assemble the upper
lter, upper lter holder, 1pc of micro cotton pad, and micro cotton pad holder
in orderly as shown above. And then, install the assembled upper lter into the
funnel as shown, and close the cap.
Finally, pour the tap water into funnel and empty out 2~3 complete jugs
before use.
Now, product is ready for us
*Filter replacement date indication.
Set the lter replacement date by spinning the date indicator wheel located
inside of cover. The interval between the date is 10 days. Please set the lter
replacement date to displayed date as close as possible.
How to replace the lters
*Upper lter
1. Take out the used upper lter from the product, and dispose the used upper
lter after disassembling the upper lter holder from the upper lter.
2. Wash the disassembled upper lter holder with clean water.
3. Take out the new upper lter from the lter box, and soak it in the water
container for about 10 minutes.
4. After 10 minutes soaking, take out the upper lter from the water container,
and wash it again by ltering water through the lter until no black or white
small particles coming out from the lter.
5. After washing, assemble the washed upper lter and upper lter holder in
orderly as shown above with 1pc of micro cotton pad and micro cotton pad
holder.
6. And then, install the assembled upper lter into the funnel as shown, and
close the cap.
※For the lifespan of upper lter,
please refer to the lter lifespan in the product manual.
*Micro Cotton Pad
1. Open the cap, and disassemble the micro cotton pad holder from the upper
lter holder. And dispose the used micro cotton pad.
2. After replacing the used micro cotton pad with the new micro cotton pad,
install the micro cotton pad holder to the upper lter holder again as shown
above.
※For the lifespan of micro cotton pad,
please refer to the lifespan of product manual.
Tapping the side of lter with hand
or soft stick may help to washing
the lter more thoroughly.
※Please check if the silicon
ring (O-ring) of mail lter
is properly installed.
It may cause a leak without it.
※
When closing the cap, close
the cap by assembling the joint
area rst as indicated
by arrow on the picture.
※
Close the cover during
ltration to prevent
dusts or small particles
get inside of funnel.
※
To open the cover, push the
protruded area, which is indicated
by arrow in the above picture.
To open the cover, push the
protruded area, which is indicated
by arrow in the above picture.
※※
Open the cover and set the
lter replacement date by
spinning the date
indicator wheel.
※The lter replacement date will
be displayed on top side of cap.
※
The water outlet cover will
be opened and closed automatically
when pouring water.
※