WATTBRICKS MP330 User manual

USER MANUAL
Thank you for purchasing
MP330│MP500│MP1000
PORTABLE POWER STATION
www.wattbricks.com
CHARGE FIRST
Before using your new Power Station MP330/MP500/MP1000, plug it
into a suitable power outlet until it is fully charged, then you can start
your exciting journey with it.

Wattbricks is an American Brand with US Based Customer Service. Please reach out to us at
[email protected] so we can answer any questions or resolve any issues. We stand
behind our products!
www.wattbricks.com

www.wattbricks.com
TABLE OF CONTENTS
01
GENERAL SAFETY RULES
SPECIFICATIONS
WHAT'S IN THE BOX?
INPUTS AND OUTLETS
BUTTON CONTROLS
LCD DISPLAY
OPERATION
HOW TO POWER DC DEVICES
COLD WEATHER USE
POWER STATION OUTPUT CAPACITY
VEHICLE CHARGING
SOLAR CHARGING
CLEANING
TRANSPORTATION AND STORAGE
RECYCLING
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
--------------------------------- P02
----------------------------------------------- P03
----------------------------------------- P04
------------------------------------- P07
----------------------------------------- P08
---------------------------------------------------- P09
------------------------------------------------------ P10
------------------------- P10
--------------------------------------- P10
---------------- P10
----------------------------------------- P12
------------------------------------------- P13
-------------------------------------------------------- P15
-------------------- P15
------------------------------------------------------ P15

www.wattbricks.com
02
GENERAL SAFETY RULES
Read this manual before using this product. Failure to follow the instructions
and safety precautions in this manual can result in damage to the product or
personal property, or serious injury or death. DO NOT use the product with
incompatible components or alter the product in any way.
WARNING
WARNING
Improper use may result in fire, property
damage, or personal injury. Make sure to use
the product according to the following safety
rules and guidelines.
WARNING
Do not expose the product to any liquid or
submerge in water. If the battery comes into
contact with water, it may cause chemical
decomposition of the battery. This may cause the
battery to catch fire or explode.
SAFETY INSTRUCTIONS
Read the following instructions to ensure safe usage:
•
modify the unit or the battery.
• DO NOT place the unit close to or
in a fire or expose it to heat. Keep
out of direct sunlight.
• DO NOT charge,use or store the
unit in a bathroom or in an area
exposed to rain or moisture.
• Only use the output socket to
power external devices. Never
connect the output to mains power
under any circumstances.
• DO NOT touch the unit or the plug-
in points if your hands are wet.
• DO NOT connect any metallic
objects to the AC input or output.
• DO NOT rub your eyes if fluid from
inside the unit should get in your
eyes.
• DO NOT dispose the unit together
with household waste.
• DO NOT use any inappropriate
power cords.
• DO NOT operate the unit above the
specified input voltage.
• DO NOT use the unit if it is not
functioning correct
• DO NOT move the unit if it is
recharging or in use.
DO NOT disassemble, repair or •
other abnormal circumstances are
observed, stop using the unit
immediately and contact the dealer
or our customer service center.
• The unit complies with all legal
requirements for transport of
dangerous goods.
• Make sure that the unit is properly
secured when transporting it in a
motor vehicle.
• Only charge, use and store the unit
within an ambient temperature of 0
to 40℃ (32 ~104°"F).
• Switch the unit off immediately if it
has ac ciden tally fallen, was
dropped or was exposed to
vibrations.
• Once the unit is fully charged,
unplug the adapter or charger.
Wattbricks is not liable for any
damage caused by using different
brand charging cables.
• Use of different cables will void the
products warranty and may cause
damage or serious bodily injury.
If rust peculiar odors.overheating or
•
clean and dry environment.Do not
use and store in dusty and wet
environment.
• Check the unit prior to every use.
Do not use the unit if it is damaged,
broken.
• DO not use the unit if the power
cord is damaged or broken.
• Keep the unit away from children.
DO NOT let children use the power
supply unit.
• Keep this product away from pets.
• DO NOT use or store the unit in an
area or environment with high
temperature.
• Should fluid from inside of the unit
come in contact with your skin or
clothing, wash the affected areas
with tap water.
• In a storm,unplug the power cord
from the socket.
• DO NOT charge the unit via power
supply systems that operate
outside of 100~240V.
• DO NOT place the unit on its side
or upside down while in use or
storage.
• DO NOT use accessories for other
usage.
Use and store the unit only in a
DANGER
Noncompliance may very
likely lead to serious injury*or
death·
WARNING
Noncompliance may lead to
serious injury** or death
CAUTION
Noncompliance may lead to
injuries and/or property
damage**
Product Maintenance:
1) Battery life may be reduced or become nonfunctional if not properly maintained.
2) Fully charge and discharge the battery at least once every 3 months to maintain battery health.
3) Do not store battery with less than 50% charge.
Carefully read the instructions for the electric devices that you intend to connect to your power.

Model Name:
Battery Cell Chemistry:
Capacity:
Running Watts:
Peak Watts:
Total Power:
AC Output Voltage:
Frequency:
Waves Type:
Life Cycle:
Charge Time:
Charging Temperature Range:
Operational Temperature Range:
Warranty:
Certifications:
Mp330
Lithium Ion (Li-ion) NMC
288.6Wh 11.1V 26Ah
330W
600W
564W (330WAC / 234W DC)
120V
60Hz
Pure Sine Waves
800 Cycles to 60% Capacity
32° – 104°F (0° – 40°C)
14° – 113°F (-10° – 45°C)
1 Year
FCC, RoHS, UN38.3
With Adapter charger:
0-100% charge 6-8 hours;
With car charger:
0-100% charge 6-8 hours;
With solar charger:
0-100% charge 6-8 hours
www.wattbricks.com
03
INTENDED USE
The Wattbricks Power Station is intended as a power supply for electronic devices with
a maximum power consumption of continuous wattage. Our product is not suitable to be
used with equipment that relates to one's own personal safety and relies heavily on
electricity, such as medical devices, equipment for nuclear facilities, the manufacture
of air and spacecraft, etc. We therefore assume no liability for accidents involving
personal safety, fires, or machine failures caused by using our product with the
aforementioned devices.
SPECIFICATIONS

SPECIFICATIONS
Model Name:
Battery Cell Chemistry:
Capacity:
Running Watts:
Peak Watts:
Total Power:
AC Output Voltage:
Frequency:
Waves Type:
Life Cycle:
Charge Time:
Charging Temperature Range:
Operational Temperature Range:
Warranty:
Certifications:
Mp500
Lithium Ion (Li-ion) NMC
519.48Wh (22.2V, 23.4Ah)
500W
1000W
834W (500WAC / 234W DC)
120V
60Hz
Pure Sine Waves
800 Cycles to 60% Capacity
32° – 104°F (0° – 40°C)
14° – 113°F (-10° – 45°C)
1 Year
FCC, RoHS, UN38.3
With Adapter charger:
0-100% charge 6-8 hours;
With car charger:
0-100% charge 6-8 hours;
With solar charger:
0-100% charge 6-8 hours
www.wattbricks.com
04
INTENDED USE
The Wattbricks Power Station is intended as a power supply for electronic devices with
a maximum power consumption of continuous wattage. Our product is not suitable to be
used with equipment that relates to one's own personal safety and relies heavily on
electricity, such as medical devices, equipment for nuclear facilities, the manufacture
of air and spacecraft, etc. We therefore assume no liability for accidents involving
personal safety, fires, or machine failures caused by using our product with the
aforementioned devices.

Model Name:
Battery Cell Chemistry:
Capacity:
Running Watts:
Peak Watts:
Total Power:
AC Output Voltage:
Frequency:
Waves Type:
Life Cycle:
Charge Time:
Charging Temperature Range:
Operational Temperature Range:
Warranty:
Certifications:
Mp1000
Lithium Ion (Li-ion) NMC
999Wh (22.2V, 45Ah)
1000W
2000W
1234W (1000WAC / 234W DC)
120V
60Hz
Pure Sine Waves
800 Cycles to 60% Capacity
32° – 104°F (0° – 40°C)
14° – 113°F (-10° – 45°C)
1 Year
FCC, RoHS, UN38.3
With Adapter charger:
0-100% charge 6-8 hours;
With car charger:
0-100% charge 6-8 hours;
With solar charger:
0-100% charge 6-8 hours
www.wattbricks.com
05
INTENDED USE
The Wattbricks Power Station is intended as a power supply for electronic devices with
a maximum power consumption of continuous wattage. Our product is not suitable to be
used with equipment that relates to one's own personal safety and relies heavily on
electricity, such as medical devices, equipment for nuclear facilities, the manufacture
of air and spacecraft, etc. We therefore assume no liability for accidents involving
personal safety, fires, or machine failures caused by using our product with the
aforementioned devices.
SPECIFICATIONS

INPUTS AND OUTLETS
www.wattbricks.com
06
1
2
3 4 5 6
8
9
10 11
7
1. LCD Display
Displays the various conditions of the product. The screen will turn of after 5 mins. You can turn
it on by pressing ON/OFF button.
2. USB-A Output Ports
Charge a wide array of devices such as your iPhone, tablet, GoPro, speakers, or anything that
needs to be charged through a USB-A Port. The USB-A Output Indicator Light will automatically
light up when a USB-A port is in use.
3. USB-C Output Ports
Devices that charge through a USB-C port, such as a MacBook Pro, Android phone, or other
devices can be charged by the MP500 USB-C port. The USB-C Output icon will appear on LCD
Display when a USB port is in use.
4. DC input
Charging the unit by the DC input ,there are three ways for charging : solar PV input ar charger
input and the adapter input .
5. PV input
it is an anderson port , the unit can be charged by the solar PV panel with anderson plug
Cigarette Lighter Output
LCD Screen Display
DC 5525 Output
USB-A Output
1
2
3
4
USB-C Output
AC Output
Anti-collision Strip
DC Input
5
6
7
8
SOS MODE & LED light
Wireless Charger
PV Input
9
10
11
AC OUTPUT

BUTTON CONTROLS
www.wattbricks.com
07
A B
C
A: MAIN POWER
B: LED LIGHT ON/OFF
C: DC ON/OFF Button
D: USB ON/OFF Button
E: AC ON/OFF Button
Button A: MAIN POWER
Button A is the main power switch. Press Button A to turn on or off
Button B: LED LIGHT ON/OFF
Activates:
Single Press - Turn on/off LED light on back of unit
Double Tap - Activate SOS Mode, LED light visual distress signal.
Button C: DC OUT ON/OFF
Please Button C to activate the DC out plug(s) after turning on the Main Power (A).
Button D: USB OUT ON/OFF
Button D to activate the USB out plug(s) after turning on the Main Power (A).
The USB-C cable of different devices need different endorsements of corresponding protocols,
if the USB-C port doesn't work, try to use the AC adapter to charge .
Button E: AC OUT ON/OFF
Press Button E to Activate the AC out plug(s) after turning on the Main Power (A).
Please turn off the AC Out Plug(s) when not in use.
Note: The Fan may turn on intermittently during high output loads or temperatures.
Wattage Limit Please observe the wattage limit on the AC OUT.
Wireless charger
MP330/MP500: Press Main Power (A) to turn on or off the wireless charger.
MP1000: Press Button D to Activate the Wireless charger after turning on the Main Power (A).
Cooling fan
Product utilizes an internal cooling fan to ensure the product is operating within the appropriate
temperature range. MP500,when it experiences a higher output load, will automatically turn on
the fan during discharge or recharging , the fan may operate intermittently to keep internal
temperature within operating range.
The fan will likely start when the AC circuit is activated to ensure proper operation.
Press
Please Press
D E

LCD DISPLAY
www.wattbricks.com
08
H: Battery Level Indicator
I: Input Status
J:DC Outputs Status
K:AC Outputs Status
L:USB Outputs Status
I J
H
L K
Battery level indicator
The battery level is provided by percentage of battery charge corresponding to the number of
bars and percentage displayed. The segments in the battery level correspond to the current
state of charge, 0-5% empty, 6-20% one segment, 21-40% two segments, 41-60% three
segments, 61-80% four segments, and all five are lit when charge level is above 81%.
Provides the user live telemetry data on time to completely charge, or deplete the battery based
upon the energy entering or leaving the battery.
Highly recommend to fully charge product when first use. Higher battery level indicator show,
more precise the data will indicate.
Please be aware that this value can adjust multiple times as the energy draw changes from the
connected devices. This is evident during initial activation of ports with a connected device.
Recommended back to charge the product when battery indicate less than 20%. Note that when
you first plug in a power source, whether it's a solar panel or a wall charger, the product may
take a minute to detect and adjust its charge circuitry before it starts drawing power from the
source.
Input status : The product is capable of providing input energy in watts.
DC output status : The display will provide output watts of the DC port.
AC output status : The display will provide output watts of the AC port.
USB output status : The display will provide output watts of the USB port.
Power-saving mode:
when the device enters the input or output state, it will enter the screen-off mode after more
than 20 seconds, which does not affect the normal operation of the device. When the output
power of the device is less than 5W, the device will go into hibernation after more than 3 hours,
and the input can be "awakened" when the input is charged or any button is pressed. When not
in use, press the switch button to turn off the output.

www.wattbricks.com
09
OPERATION
Only operate the Power Station within the recommended temperature range 14°–113°F (-10°
–45°C). Do not move the unit if it is charging or in use.
How to power AC devices
Make sure the devices you are plugging in are turned off. Connect the power cable plug of the
electrical device into an AC outlet on the Power Station. Push the AC ON/OFF button to turn on
AC power. The button will illuminate when it is turned on. Turn ON the AC device. The LED
Display will show the real-time wattage use of the device. When finished, turn off all attached
devices, remove the power cable, then push the AC ON/OFF button to turn OFF AC power. (If
you leave the AC ON/OFF button ON it will deplete the battery.)
NOTICE: If the total output exceeds running power, the power station will automatically shut off.
Make sure the Power Station can supply enough continuous (running) and peak (starting) watts
for the items you will power at the same time.
How to power DC or USB devices
Connect the power cable plug of the electrical device to a USB outlet or DC outlet. Push the DC
ON/OFF or USB ON/OFF button to turn on. The button will illuminate when it is on. The LCD
Display will display real-time wattage of the device. When finished, push the DC ON/OFF or
USB ON/OFF button to turn off
NOTICE:
If the total output exceeds the wattage output of the DC outlet, the power station will
automatically shut off. Ensure the power consumption is less than what the ports are rated
before connecting them to the Power Station.

WHAT IT POWERS
Laptops (41.4Wh) 32" TV(60W) CPAP without heated Gopro (5.9Wh) Floodlight(40W)
Mini Fridge(40W)
DJ Drone(89.2Wh) Smartphone(10Wh)
+MORE
Switch(16Wh)
CHARGING
Only charge the Power Station within the safe charging temperature range (32°–104°F
(0°–40°C). It is recommended to fully charge product every 3 months to maintain the health of
the battery pack.
HOW TO CHARGE
From Solar Charger
100W 7-9 hours
depending on solar conditions
From Car Port 12V
7-8 hours when car running
From Wall Charger 110V
6-7 hours
www.wattbricks.com
10

www.wattbricks.com
11
AC Adapter Charging
It will take 6-7 hours to charge fully by using the AC adapter we provided.
AC Outlet
AC Adapter
Cigarette Lighter Plug
Car Charger
Solar Panel Charging
2. Place Solar Panels in direct sunlight as much as possible.
3. Support 60W/80W/100W/120W Max Solar Panels (Not included), the charging time is
determined by the solar light intensity.
1. DO NOT charge the unit via solar panel that operate voltage outside of DC12-26V
(Not included)
12V Car Charger Charging
Use the Car Charger we provided to charge this unit. The full charge time takes 7-8 hours.
When the LCD display shows the battery power of 100%, it indicates that this unit is fully
charged.
Caution: Do not charge the product with solar PV input and car port at the same time!

www.wattbricks.com
12
WARNING
Do not charge the Power Station immediately after it is fully discharged.
For safety, wait 2 to 3 hours for the product to cool down before
charging. If you attempt to charge product immediately after a full
discharge, the product will display INPUT 0W on the LCD as an
overheating protection reminder.
Can MP330/ MP500 power my AC devices while it's charging?
NO, the advanced battery management system of the Mp330 and Mp500 allows it to charge a
connected device via DC output & USB output while charge the product. Do not connected
device via AC output while charging the Mp330 and Mp500 .
FAQs
Q: What devices can I charge and power with the product?
A: The AC output port is designed to charge/power devices that operate at less than
continuous/running watts total. Devices drawing more than it cumulatively will not function.
Q: Can the product be charged during use?
A: While pass-through charging is supported, we do not suggest it. as it will diminish the long
term battery life.
Q: Does the product MP1000 work as a UPS?
A: No, the product requires manual activation with the power button to turn on, so it will never
turn on or off automatically.
Q: For how many hours will MP500 power my device?
A: To calculate the working time use this formula: 500Wh×0.82/Watts of your device.
Example: 40 watt mini fridge: 500Wh×0.82/40=approx. ID hours
Q: Is there a built-in MPPT controller?
A: Yes, all MPXXX portable power stations include a built-in MPPT controller.
Q: How do I check the current charge?
A: Turn the product on and refer to the Battery Level Status on the LCD Display.
Q: Why does charging From 99% to 100% take so long?
A: This is normal. To optimize battery life and charging speed, the battery charges faster when it
is low, and as it approaches the maximum charge (100%), the unit will automatically limit the
charging speed to avoid damage to the battery.
Q: Can I leave the product plugged in and charging all the time?
A: No, Once the unit is fully charged, unplug the adapter or charger.
Q: Are the output ports regulated?
A: Yes all outputs are regulated to minimize voltage change as the battery power decreases.
Q: Can I replace the internal battery?
A: No, never disassemble or modify the product. Always follow your local laws for proper battery
disposal and/or recycling.

www.wattbricks.com
13
Q: My AC device is rated for less than the rated wattage of the product, but my device won't turn
on when plugged into the AC port.
A: Certain devices require more wattage upon startup than may be listed on the device .
If the startup wattage of the device exceeds the rated/continuous wattage of the product,
the device will not turn on, even if the wattage listed on the device is less than listed on
the product. In this case, verify the AC port is working by trying a lower wattage device
TROUBLE SHOOTING
The device does not discharge:
(1) Check whether the output buttons are activated ;
(2) Check whether the total output power exceeds the rated output power;
(3) Check whether the temperature of the equipment is too high.
The device can not be charged:
3) If the device cannot be charged immediately after it is discharged, please wait for an hour
and try again, it may enter the over-temperature protection.
1）Confirm that the wall plug power adapter's cord is inserted fully into the DC Input.
2）Confirm that the AC wall plug power adapter is the charger provided with MP500.If the input
does not comply with the requirements located in the general specifications section, the low
watt range 0 % to 10 %may be displayed on the LCD.
In the event that the unit catches fire:
Never attempt to extinguish a fire if it is unsafe to do so. Contact your local fire department. If it
is safe to do so use an electronic safe fire extinguisher or fire blanket. Do not touch any hot or
burnt components. Dispose of the unit only when safe to do so after the unit is extinguished and
fully cooled.
Getting the Battery Pack Wet.
Warning: Getting your battery pack wet could cause electric shock or other bodily harm.
Never attempt to power on a wet battery pack.
Surface Water: IF your battery pack was lightly splashed with water, wipe the unit dry
and allow it to fully dry For several hours before powering on.
Water got inside: IF water entered the battery pack, do not touch the battery pack and
place it in a safe area until Fully dry. Do not attempt to power the battery pack on and
dispose of the battery pack in accordance with local laws.
Battery fell into water:
Do not attempt to retrieve the battery back,
and contact your local fire department for
guidance. If unit is retrieved from the water,
do not touch the battery pack and place it in
a safe area until fully dry and dispose of it
properly in accordance with proper battery
disposal.NOT
WATERPROOF
NOT
FIREPROOF

RECYCLING
Dispose of the unit in hazardous material-specific recycling locations only after a
complete discharge (if possible). Batteries are hazardous chemicals. Strictly follow
your local regulations regarding battery disposal and recycling. Dispose of the unit
immediately if it cannot be powered on after over-discharging.
Always return your used electronic products, batteries, and packaging materials to
dedicated collection points to prevent uncontrolled waste disposal and promote the
recycling of materials.
www.wattbricks.com
14
CLEANING
•Only clean the surface of the unit using a dry, non-abrasive cloth. You can use cleaners
designed for mobile phones or computer screens. To ensure adequate cooling, vacuum the fan
vents to remove dust and debris.
TRANSPORTATION AND STORAGE
• Battery life may be reduced if not used for an extended period of time. Discharge the Power
Station to 30% battery life, then charge to 85% every 3 month to prolong battery life.
• DO NOT place the product near a heat source, such as a car in direct sunlight, a fire source,
or a heating stove.
• Store the product in a dry environment. DO NOT place the product where it may contact water
or high humidity.
• Make sure no small metal objects can fall on or around the product while in storage.
• Never transport a product with a battery power level higher than 30%.
• Never store the product in environments below -4°F (-20°C) or above 113°F (45°C).
ALL RIGHTS RESERVED
All rights reserved. No reproduction allowed in any form without written permission from
Wattbricks
DISCLAIMERS
All information, illustrations, and specifications in this manual were in effect at the time of
publishing. The illustrations used in this manual are intended as representative reference views
only. We reserve the right to make any specification or design change without notice.

ACCESSORY LIST
Recommend to use 120W Solar panel (not included).
MC4-7909
connector cable
12V Car Charger
cable
User Manual AC 100-240V wall plug
power adapter
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
www.wattbricks.com
15
NOTICE
Transportation: The power station meets all legal requirements for the transportation of
dangerous goods. The capacity of the lithium battery pack exceeds 100Wh. According to
international standards Standard, if the power station is transported by air, it must be
transported in accordance with IATA standard packaging. The instructions and labeling
requirements of the International Air Transport Association and related declarations must be
completed.
Not permitted on aircrafts
Avoid extreme temperature
To preserve the battery lifespans, please use
and recharge at least once every 3 months
Use original or cerified charger and cables
Avoid dropping
Please dispose of batteries and electronic
goods in accordance with local regulations
Do not disassemble
It's not waterproof,do not expose to liquids

NOTES
www.wattbricks.com
16

NOTES
www.wattbricks.com
17

www.wattbricks.com