Help and Comments www.waybasics.com/help Share and Win www.waybasics.com/share
Important
Tip Start assembly from bottom to top.
DO NOT place unit on its side or back as
it will compromise its structural integrity.
THIS SIDE UP
WARNING: CHOCKING HAZARD
Small parts NOT for children under 3 years
1 Backer Board
4 holes for pins
2 Horizontal zBoards
2 Vertical zBoards
6 holes for pins
16 Pins
Included
BLOX CUBE
• Assemble your unit on a flat even surface, carpet not recommended
• Furniture is for indoor use only
• When moving your Way Basics furniture, lift from the bottom
• Make sure zBoard surfaces are clean and dry
12
34
Place alignment pins in
vertical zBoards and backboard.
Start with the bottom horizontal
zBoard. Align vertical zBoards and
backboard to holes in the horizontal
zBoard.
Align horizontal zBoard and press
firmly to secure unit together. Visit links
below for more details.
Enjoy building possibilities!
Carefully remove the 3M
protective layer from adhesive.
