Waytronic WT-X11 User manual

Shenzhen Waytronic Electronics Co., Ltd WT-X11
1
WT-X11
Voice Prompter (Body Induction)
1. Product features
➢Small and exquisite, playing MP3 audio with excellent sound quality.
➢Using human body induction, when a person passes through the sensing area, it will immediately trigger and
play voice( induction distance: ≤4m)
➢Built in 32Mbit=4M byte memory, the voice content can changed freely by USB connected with computer.
➢Built-in powerful lithium battery and low power consumption design, allow unit has longer working time.
➢With charging management, low battery remind function.
➢Equipped with mounting brackets, which are convenient and quick to install.
➢Widely used in supermarkets, convenience stores, gas stations, high-speed service areas and stations.

Shenzhen Waytronic Electronics Co., Ltd WT-X11
2
2. Electrical parameters
Power supply mode
DC3V~ 5V stabilized voltage supply
3.7V 1500 mAH lithium battery
Working Current
Sleep standby mode
≤40uA
Playing mode
≤330mA(DC4.7V)
Charging Current
≤950mA
Audio Format
MP3
Bit Rate: 8~320Kbps
Audio Output Power
8Ω/2W(typical value)
Infrared Induction Range
≤3m(120°Angle)
Volume
≥100dB
Battery lasting time
In fully charged state, playing 50 times a day, 10 seconds
long voice, battery can last more than a month
3. Appearance introduction
3.1 Button function
Button name
Operation
Function
On-off button
Switch
Turn on/off
A button
Short press
Next audio（all loop）
Long press 3 seconds
Single playing mode（Red light flashes 3 times）
B button
Short press
Volume adjust（1-8 level）
Long press 3 seconds
All loop playing mode（Red light flashes 3 times）
LED indicator
PIR sensor
B button
A button
Speaker
Micro USB
On/off button
Bracket

Shenzhen Waytronic Electronics Co., Ltd WT-X11
3
3.2 LED function
LED color
function
Working condition
Red
Playing
Red LED on when playing,off when finish
playing
Low battery warning
Red LED flashes 5 times without sound
playing
Charging
The red LED flashes slowly when charging,
and keeps on when playing
Blue
Full charge
The blue LED keeps on
Red and blue
Turn on
Red and blue lights flashing
Copy audio
The Red and blue lights flashing
4. Audio download
①Connect the computer via the micro USB data cable, and recognize the removable disk.
②Copy the prepared MP3 voice to the removable disk.
③Disconnect the data cable, short press the A button to listen the audio.
5. Installation
5.1 Bracket assembly

Shenzhen Waytronic Electronics Co., Ltd WT-X11
4
4.2 Installation diagram
①Fixed on the door
② Side installation

Shenzhen Waytronic Electronics Co., Ltd WT-X11
5
③Aisle installation
Notice:
1. Too high temperature (≥33℃) will affect the sensing distance and sensitivity.
2. The air conditioner and the fan facing the sensor head will affect the sensing distance and sensitivity.
5. FAQ
6. Accessories
Problem
Solution
Volume is too low
Press B button to adjust the volume
No sound
1. Whether the unit has turn on
2. Whether the unit is in low battery(Red LED flashes 5 times without
sound playing)
Can not recognize
the removable disk
1.Whether the USB cable has date transfer function
2.Whether the USB cable is connect correctly
Name
Quantity
Host
1 pcs
Bracket
1 set
5V 1A USB adapter
1 pcs
USB cable
1 pcs
User manual
1 pcs

Shenzhen Waytronic Electronics Co., Ltd WT-X11
6
Disclaimer
Shenzhen Waytronic Electronics Co., Ltd. reserves the right to modify the use of materials without notifying
customers. The new product specifications will be subject to the latest version of the usage data.
Contact Us
Shenzhen Waytronic Electronics Co., Ltd.
Tel: [phone]
Fax : [phone]
Website: https://www.waytronicmfg.com/
E-mail: [email protected]
Add:4/F,Building No.11,Fuan Robotics Industrial Park, Fuyong,Baoan
District,Shenzhen ,518103,Guangdong ,China