WBOX Technologies WBXML1853 User manual

LED HD PRO-GRADE
COLOR MONITOR
WBXML1853
WBXML2153
WBXML2383

WBXML1853|2153|2383
1
Contents
Contents ............................................................................................................. 1!
Safety ................................................................................................................ 1!
Cautions.............................................................................................................. 3!
FCC RF Interference Statement .................................................................................. 3!
Connections ......................................................................................................... 5!
Controls & Menu Operation ....................................................................................... 6!
Mounting Guide ....................................................................................................10!
Accessories .........................................................................................................11!
Power Indicator / Modes of Operation .........................................................................11!
Dimensions .........................................................................................................12!
Specifications ......................................................................................................13!
Limited Warranty..................................................................................................14!
Safety
1. Read these instructions completely and comply with all requirements.
2. Retain these instructions for reference.
3. Comply with all instructions and warnings, both in this manual and on the product.
4. Disconnect the monitor from all power before cleaning. Use a damp cloth for cleaning; and do
not use liquid or aerosol cleaners.
5. Never use the monitor in damp areas or near water.
6. Never place the monitor on an unstable surface; if the monitor falls it may cause serious
damage to people or property.
7. When selecting a location for placement/installation please ensure:
A. To allow for sufficient ventilation leave a minimum distance of 4” around the monitor.
B. Never allow anything (e.g. paper, cloth, etc.) to obstruct the monitor ventilation
openings.
C. Never allow an open flame source (e.g. lighted candles) near the monitor.

WBXML1853|2153|2383
2
D. If batteries are used, please dispose of all batteries as per local regulations.
E. Use the monitor in indoor environments as per the temperature and humidity specs.
8. The monitor should be operated from a power source indicated on the rear of the monitor.
9. The 3 wire grounding type plug [having a third (grounding) pin] used on this monitor is a safety
feature. Do not power the monitor without a grounding-type plug.
10. Do not place the monitor where people will walk on the cord or allow anything to rest on or rub
against the power cord.
11. If an extension cord is used to power the monitor, make sure that the total ampere usage of all
the products plugged into the extension cord does not exceed the ampere rating of the
extension cord nor the power rating of the outlet.
12. To avoid the risk of fire or an electric shock resulting from contact with dangerous voltage
points or damage to parts, never insert objects of any kind into the monitor cabinet slots.
Never spill any kind of liquid on the monitor.
13. Do not attempt to service this monitor yourself, as opening or removing the cover may expose
you to dangerous voltage points or other risks.
14. If any of the following occur, disconnect the power to the monitor and refer servicing to
qualified service personnel:
A. The power cord or plug is damaged or frayed.
B. If liquid has been spilled into the monitor.
C. If the monitor has been exposed to rain, water or other liquids.
D. If the monitor does not operate as expected as per the operating instructions. Adjust only
those controls as described in the operating instructions; improper adjustment of other
controls may cause the monitor to become inoperative and may void the warranty.
E. If the monitor has been dropped or the cabinet has been damaged.
F. If the monitor exhibits a distinct change in performance, indicating a need for service.
Please note:
The power supply cord is used as the main disconnect device. Ensure that the power outlet is
located/installed near the monitor and is easily accessible.

WBXML1853|2153|2383
3
Cautions
CAUTION TO SERVICE PERSONNEL
POWER SUPPLY CORD IS USED AS MAIN POWER DISCONNECT DEVICE
IN THIS PRODUCT. UNPLUG THIS PRODUCT FROM THE WALL OUTLET
BEFORE REMOVING THE BACK COVER AND SERVICING.
1. Never remove the back cover.
A. Only specially qualified personnel should remove the back cover.
2. Do not use in environments that may cause hazards.
A. To prevent electrical shock or a fire hazard, do not expose the monitor to rain or
moisture. This monitor is designed to be used in a residential or commercial environment.
Do not subject the monitor to excessive vibration or dust, or to corrosive gases.
3. Keep in a well-ventilated location.
A. Ventilation slots are provided on the cabinet to control the internal temperature of the
monitor. Do not cover these ventilation holes or place anything on the unit which might
block those slots.
4. Avoid excessive heat.
A. Avoid placing the monitor in direct sunshine or near a heating appliance.
5. To eliminate eye fatigue.
A. Do not use the monitor against a bright background or where sunlight and other light
sources will shine directly on the monitor.
6. Be careful of heavy objects.
A. Neither the monitor itself nor any other heavy object should rest on the power cord.
Damage to a power cord can cause fire or electrical shock.
FCC RF Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not

WBXML1853|2153|2383
4
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment causes harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures.
oReorient or relocate the receiving antenna.
oIncrease the space between the equipment and receiver.
oConnect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
oOnly a shielded interface cable should be used.
Finally, any changes or modifications to the equipment by the user not expressly approved by the
grantee or manufacturer could void the user's authority to operate such equipment.
Doc Compliance Notice
This digital apparatus does not exceed the Class A limit for radio noise emissions from digital
apparatus set out in the radio interference regulation of Canadian Department of Communications.
CE Compliance
This monitor complies with the basic protection requirements of the
Electromagnetic Compatibility (EMC) Directive 2004/108/EC for electrical and
electronic equipment imported into the European Union (EU):
The electromagnetic disturbance generated by the apparatus does not exceed the
level specified in the harmonized EMC Standards for this type of apparatus. It has a level of
immunity to the electromagnetic disturbance to be expected in its intended use, and should
operate without unacceptable degradation of its specified performance.

WBXML1853|2153|2383
5
Connections
Back View of Monitor
Connector panel is located on
the underside of the case rear
projection, just above the stand.
Detailed View of the Connector
Panel
Only use a properly, grounded,
three wire cord appropriate for
the local power system.

WBXML1853|2153|2383
6
Controls & Menu Operation
Control Keys / Buttons
Buttons are located on the right side of the
Bezel on 19-24” models.
To change the input selection, press SOURCE
to display the pop-up menu, use up/down to
highlight the desired source, then press
ENTER to complete the selection.
To verify the current input selection, press
SOURCE to display the pop-up, then press
SOURCE again to dismiss the pop-up.
To close any OSD window, press SOURCE
twice.
Picture Menu
The “PICTURE” menu is for adjusting the image appearance and parameters. The Picture menu is
the same for AV/CVBS, S-Video and HDMI; the Picture menu options differ for VGA.
Picture Menu (CVBS/AV, s-Video & HDMI)
Press the MENU button to bring the menu on
screen, and then the up/down buttons to move up
along the main menu selections to choose the
PICTURE menu. Press the MENU button to move
between the left side main menu selector into
the window of menu choices and parameters.
Use the up & down buttons to move the yellow
highlighted sub-menu selection within the sub-
menu. Pressing the right + & left - buttons will
adjust the value of the highlighted item. Press
the MENU button to exit the sub-menu and return
to the main menu selector.

WBXML1853|2153|2383
7
To exit the menu system, press the SOURCE button twice. Settings will remain as they appear on
screen.
Adjustments
Contrast: Adjusts the range of difference between light and dark areas of the picture.
Brightness: Adjusts the overall picture intensity
Hue: Increase or decrease the red/green/blue tint of the image.
Saturation: Increase or decrease the intensity of (mix of white with) colors in the image.
Sharpness: Change the balance between image detail (Resolution) and degree of transition
between areas of differing brightness (Acutance).
Color Temp: Adjust color reproduction: choose between normal, warm (more red) & cool (more
blue) to achieve the best visual result
Scale: Choose between SD 4:3 and HD 16:9 aspect ratio. If analog images appear „stretched‟use
4:3 scaling.
Picture Overscan: Choose between legacy CRT-type cropping of picture edges (On) or display of
entire image without cropping (Off). Note: HDMI recognizes two types of signals: “Video” and “PC”;
for PC type signals Overscan is disabled.
Picture Mode: Choose for User/Vivid/Soft/Standard for most pleasing image based on ambient
light.
Picture Menu for VGA
Adjustments
Contrast: Adjusts the contrast between light and dark areas of the picture.
Brightness: Adjusts the overall picture shade and brightness.

WBXML1853|2153|2383
8
Color Temp: To adjust color reproduction choose between normal, warm (more red) & cool (more
blue)
Scale: Choose between SD 4:3 and HD 16:9 aspect ratio.
Audio Menu
Press the MENU button to bring the menu on
screen, and then up/down buttons to move along
the menu selections to highlight the AUDIO menu.
Press MENU again to move between the left side
main menu selector into the window of menu
choices and parameters.
Use the up & down buttons to move the yellow
highlighted sub- menu selection within the sub-
menu. Pressing the right + & left - buttons will
adjust the value of the highlighted item. Press the
MENU button to exit the sub-menu and return to
the main menu selector.
To exit the menu system, press the SOURCE button twice.
Adjustments
Bass: Boost/limit low frequency tones.
Treble: Boost/limit high frequency tones.
Balance: Change relative volume between left and right speakers.
OSD Menu
Press the MENU button to bring the menu on
screen, and then up/down buttons to move along
the menu selections to highlight the OSD menu.
Press MENU again to move be- tween the left side
main menu selector into the window of menu
choices and parameters.
Use the up & down buttons to move the yellow
highlighted sub-menu selection within the sub-
menu. Pressing the right + & left - buttons will
adjust the value of the highlighted item. Press
the MENU button to exit the sub-menu and return
to the main menu selector.
To exit the menu system, press the SOURCE button twice.

WBXML1853|2153|2383
9
Language: Choose OSD display language from English/Chinese/German/French/Spanish/Italian H-
Position: OSD horizontal position on the screen
V-Position: OSD vertical position on screen
Duration: OSD Menu timeout
Halftone: OSD Menu background opacity (allows viewing of the video behind the OSD menu).
Reset Defaults: Restore monitor to factory default settings
Version: Displays firmware version number (not adjustable).
Function / Geometry Menu
The HDMI, AV/CVBS and s-Video inputs share the
FUNCTION menu. The VGA menu is labeled
GEOMETRY.
Function Menu
Press the MENU button to bring the menu on
screen, and then up/ down buttons to move
along the menu selections to highlight the
FUNCTION menu. Press MENU again to move
between the left side main menu selector into
the window of menu choices and parameters.
Use the up & down buttons to move the yellow highlighted sub-menu selection within the sub-
menu. Pressing the right + & left - buttons will adjust the value of the highlighted item. Press the
MENU button to exit the sub-menu and return to the main menu selector.
To exit the menu system, press the SOURCE button twice.
Adjustments
DLC: Dynamic Light Control On/Off Limits the brightness/contrast ratio extremes in on screen
video.
Geometry Menu (VGA Only)
Press the MENU button to bring the menu on
screen, and then up/down buttons to move along
the menu selections to highlight the GEOMETRY
menu. Press MENU again to move between the
left side main menu selector into the window of
menu choices and parameters.

WBXML1853|2153|2383
10
Use the up & down buttons to move the yellow highlighted sub-menu selection within the sub-
menu. Pressing the right + & left - buttons will adjust the value of the highlighted item. Press the
MENU button to exit the sub-menu and return to the main menu selector.
To exit the menu system, press the SOURCE button twice.
Adjustments
H-Position: Image Horizontal position
V-Position: Image Vertical position
Clock: Relative adjustment of horizontal scan rate Phase: Relative adjustment of synch
Auto Adjust: Press Vol+/Right button to automatically adjust settings to match input signal
parameters
Mounting Guide
Wall or Other Mounting with VESA Standard
CAUTION The wall mount must bear a minimum of five times the
monitor’s net weight. To mount your MONITOR to the wall or
another surface, you need to purchase a VESA wall mount. Use four
M4 x 8mm screws (the base attachment screws removed in step 1
below are M4 x 8mm) to attach the mount. The monitor mount
VESA hole pattern is 100mm x 100mm.
Note: Metric (M4 x 8 mm) is the type screw that should be used (do not use longer screws or the
monitor may be damaged).
1. Before mounting the monitor, remove the base riser (vertical portion of the base) by removing
the four screws near the top with a screwdriver. Then the base and the riser can be removed.
In order to prevent losing these screws, we suggest replacing the screws in their original holes.
2. Attach the VESA mount (100mm x 100mm) plate to the rear of the monitor and follow all of the
instructions provided with the mount to complete the mounting process.

WBXML1853|2153|2383
11
Accessories
EU Power Cord
UK Power Cord
VGA Cable
Audio Cable
Power Indicator / Modes of Operation
LED Indicator
LED is off when power is off; LED glows green when power is on. The power management feature of
the monitor is designed for security surveillance applications. When there is no video, the monitor
remains ON to be instantly ready to display video when the source is changed or if a PC changes
state from sleep/standby to active mode. A floating “No Signal” box moves slowly across the
screen until video is restored.

WBXML1853|2153|2383
12
Dimensions
!!
Model!!
WBXML1853!
!WBXML2153!
!WBXML2383!
Letter!!
Dimension!!
mm!
!inch!!
mm!
!inch!!
mm!
!inch!!
A!!
Width!of!monitor!body!
452.10!!
17.80!!
516.60!!
20.34!!
577.00!!
22.72!!
B!!
Height!of!monitor!body!!
280.30!!
11.04!!
316.70!!
12.47!!
347.70!!
13.69!!
C!!
Depth!of!monitor!body!!
50.90!!
2.00!!
51.20!!
2.02!!
51.20!!
2.02!!
D!!
Height!of!monitor!on!
base!!
341.00!!
13.42!!
376.10!!
14.81!!
407.10!!
16.03!!
E!!
Width!of!base!
260.00!!
10.23!!
260.00!!
10.23!!
260.00!!
10.23!!
F!!
Depth!of!base!!
185.00!!
7.28!!
185.00!!
7.28!!
185.00!!
7.28!!
G!!
Width!of!viewable!area!!
422.50!!
16.63!!
477.80!!
18.81!!
531.40!!
20.92!!
H!!
Height!of!viewable!area!!
243.10!!
9.57!!
269.30!!
10.60!!
298.90!!
11.77!!
I!!
Thickness!of!monitor!!
19.50!!
0.77!!
19.50!!
0.77!!
23.80!!
0.94!!
J!!
Bottom!bezel!width!
20.60!!
0.81!!
25.40!!
1.00!!
38.50!!
1.52!!
K!!
Side!bezel!width!
14.80!!
0.58!!
19.40!!
0.76!!
26.30!!
1.04!!

WBXML1853|2153|2383
13
Specifications
Model!!
WBXML1853!
!WBXML2153!
!WBXML2383!
Screen!diagonal!dimension!
(inches)!!
18.5!
21.5!
24!
Viewable!area!W!x!H!
(inches)!!
16.63!x!9.57!!
18.81!x!10.60!
!20.92!x!11.77!
Led!Type!!
RGB!
Pixel!Pitch!(mm)!
0.28!
0.248!
0.277!
Screen!Maximum!Resolution!!
1360x768!!
1920x1080!
Supported!Panel!!
Display!Resolutions!
720x400;!640x480;!
800x600;!1024x768;!
1280x1024;!1360x768!
720x400;!640x480;!800x600;!1024x768;!1280x1024;!
1360x768;!1440x900;!
1600x900;!1680x1050;!1920x1080!
Supported!Input!Resolutions!
720x400;!640x480;!!
800x600;!1024x768;!
1280x1024;!1360x768!
1920x1080!(scaled)!
720x400;!640x480;!800x600;!1024x768;!1280x1024;!
1360x768;!1440x900;!
1600x900;!1680x1050;!1920x1080!
Refresh!Rate!(Vertical!Fre-!
quency)!
60,!70,!72.2,!72.8,!75!Hz!depending!on!resolution!
Color!Space/Gamut!
!Deep!Color!
Color!Depth!
!30!bits;!1!billion!(1,073,741,824)!colors!
Brightness!!
250!CD/m2!
Auto!Adjust!
!Yes!
Monitor!Aspect!Ratio!
!16!:!9!
Display!Aspect!Ratio!!
OSD!selectable!16:9!or!4:3!
Horizontal!TV!Lines!!
720!
1080!
Contrast!Ratio!!
2000:1!
Response!Time!(ms)!
5!
View!Angle!H/V!(degrees)!
!170/160!
Digital!Video!Inputs!!
HDMI!up!to!1920x1080!
Analog!Video!In/Out!
H
D!
!VGA!in!up!to!1920x1080!
SD!!
S-Video!in;!BNC!CVBS!In!+!Looping!Output!
Audio!inputs!(stereo)!
!1x!3.5mm!mini-jack!
Audio!output/headphone!
jack!
(stereo)!
!1x!3.5mm!mini-jack;!output!active!for!inputs!from!both!analog!and!HDMI!
digital!audio!
Speakers!!
Two!–!built!in!2.7”!x!1.2”!oval!type!

WBXML1853|2153|2383
14
Audio!Amplifier!
!1!Watt/Channel!
Filter!type!
!3D!Comb!Filter!
De-Interlace!!
3D!De-Interlace!
OSD!Languages!
!English,!German,!French,!Spanish,!Italian,!Polish,!Czech,!Dutch!
Monitor!Body!Dimensions!
(W!
x!Lx!D)!!
17.80!x!11.04!x!2.00!
!20.34!x!12.47!x!2.02!!
22.72!x!13.69!x!2.02!
Max!Dimensions!Monitor!+!
Stand!(inches)!!
17.8!x!13.42!x!7.28!
!20.34!x!14.81!x!7.28!
!22.72!x!16.03!x!7.28!
Panel!Surface!!
Matte!finish!
Case!&!Stand!Material!!
Plastic!
VESA!Mounting!Pattern!!
100x100;!location!centered!on!monitor!body!
Base/Stand!included!
!Yes!
Base!Tilt!Angle!
!+15°~-10°!
Weight!Cabinet!only!(lb.)!!
4.63!
5.73!
8.6!
Weight!Cabinet!+!Base!
Stand!
(lb.)!!
5.51!
8.75!
9.63!
Power-Watts!(on!and!
standby)!
!<!20W!!
<!30W!!
<!35W!
Power!Input!!
100~240VAC!
Operating!Temperature!!
32°~104°F!
Storage!Temperature!
!-4°~140°F!
Operating!Humidity!
!10~85%!
Accessories!
EU!Power!Cord,!UK!Power!Cord,!VGA!Cable,!Audio!Cable!
Certifications!
UL,!cUL,!CE,!FCC,!HDMI!Forum!
Warranty!
30!months!
Limited Warranty
1. Limited Warranty
A. General
Subject to the terms and conditions of this Limited Warranty, from the date of sale through the
period of time for product categories specified in Section 1(b), ADI warrants its W Box Technologies
products to be free from defects in materials and workmanship under normal use and service,

WBXML1853|2153|2383
15
normal wear and tear excepted. Except as required by law, this Limited Warranty is only made to
Buyer and may not be transferred to any third party.
ADI shall have no obligation under this Limited Warranty or otherwise if:
(I) The product is improperly installed, applied or maintained;
(II) The product is installed outside of stated operating parameters, altered, or improperly
services or repaired;
(III) Damage is caused by outside natural occurrences, such as lightning, power surges, fire,
floods, acts of nature, or the like.
(IV) Defects resulting from unauthorized modification, misuse, vandalism, or other causes
unrelated to defective materials or workmanship, or failures related to batteries of any
type used in connection with the products sold hereunder.
ADI only warrants those products branded as W Box Technologies products and sold by ADI. Any
other products branded by third parties are warranted by the third party manufacturer for a period
as defined by the third party manufacturer, and ADI assigns to Buyer those warranties and only
those warranties extended by such third party manufacturers or vendors for non-ADI branded
products. ADI does not itself warrant any non-ADI branded product and sells only on an as is basis in
accordance with ADI’s terms and conditions of sale.
B. Specific Warranties for Product Categories
Product Categories
Warranty Period
CCTV Power Supplies
24 months
Monitors
30 months
Video Baluns
30 months
Analog Cameras
36 months
DVR’s , NVR’s (excluding HDD)
60 months
IP Cameras
60 months
Racks
60 months
TV Mounts
60 months
Analog Cables
Limited Lifetime
B Connectors
Limited Lifetime
Extension Cords
Limited Lifetime
HDMI Cables
Limited Lifetime
Jacks, Cords and Intrusion Communication Accessoies
Limited Lifetime
Patch Cables
Limited Lifetime
Wire Ties
Limited Lifetime

WBXML1853|2153|2383
16
2. Exclusion of Warranties, Limitation of Liability
THERE ARE NO WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, OF MERCHANTABILITY, OR
FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE, WHICH EXTEND BEYOND THE DESCRIPTION ON
THE FACE HEREOF. TO THE FULLEST EXTENT PERMITTED BY LAW, IN NO CASE SHALL ADI BE LIABLE
TO ANYONE FOR ANY (I) CONSEQUENTIAL, INCIDENTAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES
ARISING OUT OF OR RELATING IN ANY WAY TO THE PRODUCT AND.OR FOR BREACH OF THIS OR ANY
OTHER WARRANTY OR CONDITION, EXPRESS OR IMPLIED, OR UPON ANY OTHER BASIS OF LIABILITY
WHATSOEVER, EVEN IF THE LOSS OR DAMAGE IS CAUSED BY ADI‟S OWN NEGLIGENCE OR FAULT AND
EVEN IF ADI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES OR DAMAGES. Any product
description (whether in writing or made orally by ADI or ADI‟s agents), specifications, samples,
models, bulletin, drawings, diagrams, engineering sheets, or similar materials used in connection
with the Buyer's order are for the sole purpose of identifying ADI's products and shall not be
construed as an express warranty or condition. Any suggestions by ADI or ADI's agents regarding
use, applications or suitability of the products shall not be construed as an express warranty or
condition unless confirmed to be such in writing by ADI. ADI does not represent that the products it
sells may not be compromised or circumvented; that the products will prevent any personal injury
or property loss by burglary, robbery, fire or otherwise, or that the products will in all cases
provide adequate warning or protection. Buyer understands and will cause its customer to
understand that a properly installed and maintained product is not insurance or guarantee that
such will not cause or lead to personal injury or property loss. CONSEQUENTLY ADI SHALL HAVE NO
LIABILITY FOR ANY PERSONAL INJURY, PROPERTY DAMAGE OR OTHER LOSS BASED ON ANY CLAIM AT
ALL INCLUDING A CLAIM THAT THE PRODUCT FAILED TO GIVE WARNING. However, if ADI is held
liable whether directly or indirectly for any loss or damage with respect to the products it sells,
regardless of cause or origin, its maximum liability shall not in any case exceed the purchase price
of the product, which shall be fixed as liquidated damages and not as a penalty and shall be the
complete and exclusive remedy against ADI.
FOR THE AVOIDANCE OF DOUBT, ADI DOES NOT SEEK HEREUNDER TO EXCLUDE OR RESTRICT ITS
LIABILITY IN RELATION TO (I) FRAUD, (II) DEATH OR PERSONAL INJURY DIRECTLY RESULTING FROM
ITS NEGLIGENCE OR (III) ANY MATTER IN RESPECT OF WHICH, BY LAW, IT IS NOT PERMITTED TO
RESTRICT ITS LIABILITY.
3. Limitation on Liability to Buyer’s Customers
Buyer agrees to limit liability to its customers to the fullest extent permitted by law. Buyer
acknowledges that ADI shall only be deemed to give consumers of its products such statutory
warranties as may be required by law and at no time shall Buyer represent to its customers and/or
users of ADI products that ADI provides any additional warranties. By accepting the products, to the
fullest extent permitted by law, Buyer assumes all liability for, and agrees to indemnity and hold
ADI harmless against and defend ADI from, any and all suits, claims, demands, causes of action and
judgments relating to damages, whether for personal injury or to personal property, suffered by
any person, firm, corporation or business association, including but not limited to, Buyer's
customers and/or users of the products because of any failure of the products to detect and/or
warn of the danger for which the goods were designed or any other failure of the products whether

WBXML1853|2153|2383
17
or not such damages are caused or contributed to by the sold or joint concurring negligence or
fault of ADI.
4. Returns
Subject to the terms and conditions listed below, during the applicable warranty period, ADI will
replace Product or provide a credit at purchase at its sole option free of charge any defective
products returned prepaid. Any obligations of ADI to replace Limited Lifetime warranty products
pursuant to this warranty which result from defect are limited to the availability of replacement
product. ADI reserves the right to replace any such products with the then currently available
products, or provide a credit in its sole discretion. In the event Buyer has a problem with any ADI
product, please call your local ADI branch for return instructions:
owww.adiglobal.com
owww.wboxtech.eu
Be sure to have the model number and the nature of the problem available. In the event of
replacement, the return product will be credited to Buyer's account and a new invoice issued for
the replacement item. ADI reserves the right to issue a credit only in lieu of replacement.
If any W Box Technologies product is found to be in good working order or such product's inability
to function properly is a result of user damage or abuse, the product will be returned to Buyer in
the same condition as received and Buyer shall be responsible for any return freight changes.
5. Governing Law
This Limited Warranty shall be governed by the laws of England and Wales.
6. Miscellaneous
Where any term of this Limited Warranty is prohibited by such laws, it shall be null and void, but
the remainder of the Limited Warranty shall remain in full force and effect.

WBXML1853|2153|2383
18
LED HD PRO-GRADE COLOR
Diagonal Viewing Size; BNC,
VGA, HDMI Inputs; Includes
Audio, VGA, and HDMI Cable
CAUTION: DO NOT EXCEED
MAXIMUM LISTED WEIGHT
CAPACITY, SERIOUS INJURY
OR PROPERTY DAMAGE MAY
OCCUR!
WBXML1853
WBXML2153
WBXML2383