WBOX Technologies 0E-32MON720P User manual

LED SEMI COMMERCIAL
MONITOR
0E-32MON720P（HD）
0E-43MON1080（FHD）
Tech Support
#833-574-9124(Option2)
[e-mail]

Contents
Contents ...................................................................................................................................... 1
Safety.......................................................................................................................................... 1
Cautions....................................................................................................................................... 3
FCC RF Interference Statement ....................................................................................... 4
Connections................................................................................................................................. 5
Controls & Menu Operation.............................................................................................. 6
Mounting Guide ................................................................................................................ 11
Accessories................................................................................................................................ 12
Power Indicator / Modes of Operation............................................................................ 12
Dimensions ............................................................................................................................... 13
Specifications................................................................................................................ 14
Limited Warranty........................................................................................................... 15
Safety
1. Read these instructions completely and comply with all requirements.
2. Retain these instructions for reference.
3. Comply with all instructions and warnings, both in this manual and on the product.
4. Disconnect the monitor from all power before cleaning. Use a damp cloth for
cleaning; and do not use liquid or aerosol cleaners.
5. Never use the monitor in damp areas or near water.
6. Never place the monitor on an unstable surface; if the monitor falls it may cause
serious damage to people or property.
7. When selecting a location for placement/installation please ensure:
A. To allow for sufficient ventilation leave a minimum distance of 4” around the monitor.
B. Never allow anything (e.g. paper, cloth, etc.) to obstruct the monitor ventilation
openings.
C. Never allow an open flame source (e.g. lighted candles) near the monitor.

2
D. If batteries are used, please dispose of all batteries as per local regulations.
E. Use the monitor in indoor environments as per the temperature and humidity specs.
8. The monitor should be operated from a power source indicated on the rear of the monitor.
9. The 3 wire grounding type plug [having a third (grounding) pin] used on this monitor is a
safety feature. Do not power the monitor without a grounding-type plug.
10. Do not place the monitor where people will walk on the cord or allow anything to rest on
or rub against the power cord.
11. If an extension cord is used to power the monitor, make surethat the total ampere
usage of all the products plugged into the extension cord does not exceed the ampere
rating of the extension cord nor the power rating of the outlet.
12. To avoid the risk of fire or an electric shock resulting from contact with dangerous
voltage points or damage to parts, never insert objects of any kind into the monitor
cabinet slots. Never spill any kind of liquid on the monitor.
13. Do not attempt to service this monitor yourself, as opening or removing the cover may
expose you to dangerous voltage points or other risks.
14. If any of the following occur, disconnect the power to the monitor and refer
servicing to qualified service personnel:
A. The power cord or plug is damaged or frayed.
B. If liquid has been spilled into the monitor.
C. If the monitor has been exposed to rain, water or other liquids.
D.If the monitor does not operate as expected as per the operating instructions.
Adjust only those controls as described in the operating instructions; improper
adjustment of other controls may cause the monitor to become inoperative and
may void the warranty.
E. If the monitor has been dropped or the cabinet has been damaged.
F. If the monitor exhibits a distinct change in performance, indicating a need
for service.
Please note:
The power supply cord is used as the main disconnect device. Ensure that the power
outlet is located/installed near the monitor and is easily accessible.

3
Cautions
Only specially qualified personnel should open the case. No user serviceable parts inside.
To prevent electrical shock or a fire hazard, do not expose the monitor to rain or
moisture. This monitor is designed to be used in a residential or commercial
environment. Do not subject the monitor to excessive vibration or dust, or to corrosive
gases.
Ventilation slots are provided on the cabinet to control the internal temperature of the
monitor. Do not cover these ventilation area or place anything on the unit which
might block those slots.
Avoid placing the monitor in direct sunshine or near a heating appliance.
Do not use the monitor against a bright background or where sunlight and other light
sources will shine directly on the monitor.
Neither the monitor itself nor any other heavy object should rest on the power cord.
Damage to a power cord can cause fire or electrical shock.
POWER SUPPLY CORD IS USED AS MAIN POWER
DISCONNECT DEVICE IN THIS PRODUCT. UNPLUG THIS
PRODUCT FROM THE WALL OUTLET BEFORE REMOVING
THE BACK COVER AND SERVICING.
CAUTION TO SERVICE PERSONNEL
1. Never open the monitor case
2. Do not use in environments that may cause hazards.
3. Keep in a well-ventilated location.
4. Avoid excessive heat.
5. To eliminate eye fatigue.
6. Be careful of heavy objects.

4
FCC RF Interference Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment causes harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures.
oReorient or relocate the receiving antenna.
oIncrease the space between the equipment and receiver.
oConnect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
oOnly a shielded interface cable should be used.
Finally, any changes or modifications to the equipment by the user not expressly approved
by
as well as voiding product warranty.
the grantee or manufacturer could void the user's authority to operate such equipment.
DOC Compliance Notice
This digital apparatus does not exceed the Class A limit for radio noise emissions from
digital apparatus set out in the radio interference regulation of Canadian Department of
Communications.
CE Compliance
This monitor complies with the basic protection requirements of the
Electromagnetic Compatibility (EMC) Directive 2014/30/EU for electrical
and electronic equipment imported into the European Union (EU):
The electromagnetic disturbance generated by the apparatus does not exceed the
level specified in the harmonized EMC Standards for this type of apparatus. It has a
level of immunity to the electromagnetic disturbance to be expected in its intended
use, and should operate without unacceptable degradation of its specified
performance.

Connection
0E-32MON720P
0E-43MON1080
s
Back View of Monitor
Connector panel is located on
the underside of the case rear
projection, just above the
stand.
Detailed View of the Connector
Panel Only use a properly,
grounded, three wire cord
appropriate for the local power
system.
IR Remote Control
5
AC IN
VGA AUDIO IN VIDEO IN L IN R IN USB AUDIO OUT
CO-AXIAL OUT HDMI1 HDMI2 HDMI3
AC IN
Y PB PR VIDEO IN
HDMI1 HDMI2 VGA AUDIO IN
L IN R IN USB AUDIO OUT
MUTE
ME N U S O U RC E
HDMI
VGA
AV
1
3
4
8
2
6
7
9
5
1. Power button
Press to enter or exit the standby mode.
2.Mute button
Press to turn on or off the audio output.
3.OK button
Press to conrm selection in the setup menu.
4.Menu button
Press to enter or exit the setup menu.
5.Source button
Press to enter or exit the interface display menu.
6.Return button
Enter the menu, you can press this key to return.
7.HDMI button
Press to enter HDMI mode.
8.VGA button
Press to enter VGA mode.
9.AV button
Press to enter AV mode.
CO-AXIAL OUT

0E-32MON720P
Controls & Menu Operation
Control Keys / Buttons
Buttons are located on the right back
of the models.
Source Auto detection function
when there is/are source(s) connect to the
monitor, monitor will auto detect the source
(s) and auto select the desired source. The
source should be selected manually when
there is more than one source connected to
the monitor.
B. (VOL+) button
6
●Press the button,volume increase.
Press the button to scroll the cursor to
desired function.
A. (POWER) button
●Press the button to turn ON or turn OFF
the monitor.
●Press the button,volume decrease.
Press the button to scroll the cursor to
desired function.
C. (VOL-) button
D. (CH+) button
●Press the button to scroll the cursor to
desired function.
Press the button to increase the value of
selected function in sub OSD menu.
“ ”
Input Source
AV
OK
OK
0E-43MON1080
Input Source
AV
Component
OK
OK

G. (MENU) button
●Press the button to show the OSD main menu.
Press the button to exit OSD menu.
E. (CH-) button
●Press the button to scroll the cursor to
desired function.
Press the button to decrease the value of
selected function in sub OSD menu.
F. (SOURCE) button
Press the button to display all the signal
channel menus.
When Main menu display as confirmation key
during the OSD operation.
7
PICTURE Menu
Enter Enter Select EXIT
PICTURE
Picture Mode
Contrast
Brightness
Color
Sharpness
Tint
Color Temperature
Aspect Ratio
Noise Reduction
Standard
50
50
50
50
50
Normal
16:9
Middle
EXIT
OK
Picture Mode: press the left and right keys to
enter the selection of picture mode, the
optional :standard / user / movie / dynamic.
Contrast: press the left and right keys to set
the contrast, can be set to 0~100.
Brightness: press the left and right key to set
the brightness, can be set to 0~100.
Color: press the left and right key to set the
color, can be set to 0~100.
Sharpness: press the left and right key to set sharpness, can set to 0~100.
Tint: press the left and right key to set tint, can be set to 0~100.
Color Temp: press the left and right key to enter color temp menu, and then you can
choose color temp to :cool / warm / normal.
Aspect Ratio: press the left and right key to go in to select the zoom mode, can choose
to : 4:3/16:9 /zoom 1/ zoom 2/just scan/point to point.
Noise Reduction: press the left and right key to adjust the noise reduction, can choose
the value to:middle / high / off / low.

8
SOUND Menu
TIME Menu
Enter Enter Select EXIT
SOUND
Sound Mode
Treble
Bass
Balance
Auto Volume
Surround Sound
SPDIF MODE
Standard
50
50
0
Off
Off
Auto
EXIT
OK
Sound Mode: press the right or left key to
adjust the sound mode, it can change to :
user / music / movie / sports / standard.
Treble: press the left and right key to adjust
sound treble, which can be set to 0~100.
Bass: press the left and right key to adjust
sound bass, which can be set to 0~100.
Balance: press the left and right key to adjust balance, can be set to -50 ~ +50.
Auto Volume: press the left and right key to set the auto volume on or off.
Surround Sound: press the left and right key to set the surround or off.
SPDIF MODE: press the left and right key to set the spdif mode auto/pcm.
Enter Enter Select EXIT
TIME
Clock
Off Time
On Time
Sleep Timer
Auto Sleep
-- -- -- --
Off
Off
Off
Off
EXIT
OK
Clock: press the left and right key to current
time setting menu, and then set the current
time.
Off Time: press the left and right key to enter
the selection set off time.
On Time: press the left and right key to enter
the selection set on time.
Sleep Timer: press the left and right key to set the sleep time 10-240min.
Auto Sleep: press the left and right key to set the auto standby time.
Enter Enter Select EXIT
OPTION
OSD Language
ECO Mode
OSD Time
Blue Screen
Backlight
Prevent Burn-in
Reset
Auto
Off
15 Seconds
On
10
On
EXIT
OK
OPTION Menu
OSD Language: press the left and right key to
enter the settings of OSD language.
ECO Mode: press the left and right key to set
the ECO mode, it can be set to: Low/Middle/
High/Off.
OSD Time: press the left and right key to set
OSD menu display time.

SYSTEM LOCK Menu
USB Menu
9
Blue Screen: press the left and right key to set blue screen On or off.
Backlight: press the left and right key to adjust , which can be set to 0~10.
Prevent Burn-in: press the left and right key to set prevent burn-in On or off.
Reset: press OK key to reset OSD settings to default.
Enter Enter Select EXIT
LOCK
Enter Password ----
EXIT
OK
Enter Password: press password: 0000 to go
into system lock menu setting.
Through the left and right click"Photo"icon.
and then click C disk and open the picture.
Select the picture,press the OK key will
appear the following icon.
lcon 1: Play or Pause photo.
lcon 2: Play a preview photo.
lcon 3: Play a next photo.
lcon 4: Stop playing.
lcon 5: Set repeatplay mode.
lcon 6: Random play.
lcon 7: set the background music.
lcon 8: Photo playlists.
lcon 9: Photo information.
lcon 10: Picture left rotation ninety degrees.
lcon 11: Picture right rotation ninety degrees.
lcon 12: ZOOM in.
lcon 13: ZOOM out.
lcon 14: Move view.
lcon 15: Slide show.

MOVIE OPERATE
Remark:
10
Through the left and right click on the icon,
and then click on the "music" and the music
open C disk. Selected music, press the OK
key will appear the following icon.
Through the left and right click on the icon, and
then click on the "movie" C disk and open the
movie. Selected movie, press the OK key will
appear the following icon.
When the device cools down, the picture may be a little flicker. When the device starts, it will work without any problem.
Some red, blue and green spots appear in the picture, but it wont make any bad influence on the display.
Do not press LCD display with finger for long time, which will lead to damage of display.
Icon 1: Play or Pause movie.
Icon 2: Fast backward the movie play.
Icon 3: Fast forward the movie play.
Icon 4: Play a preview movie.
Icon 5: Play a next movie.
Icon 6: Stop playing.
Icon 7: Set movierepeat mode.
Icon 8: Random play. Icon 9: Set A-B Play. Icon 10: Movie Playlist.
Icon 11: Movie information. Icon 12: Slow forward play. Icon 13: Step forward play.
Icon 14: Goto time play. Icon 15: Zoom in. Icon 16: Zoom out.
Icon 17: Aspect ratio setting. Icon 18: Move Preview.
lcon 1: Play or Pause music.
lcon 2: Fast backward the music play.
lcon 3: Fast forward the music play.
lcon 4: Play a preview music.
lcon 5: Play a next music.
lcon 6: Stop playing.
lcon 7: Set Repeat mode.
lcon 8: Set A-B play.
lcon 9: Random play.
lcon 10: Sound mute setting.
lcon 11: Music Play list.
lcon 12: Music infor.
lcon 13: Goto time play.

0E-32MON720P
11
Mountin g Guide
Wall or Other Mounting with VESA Standard
Note: Metric(32”43”HMФ6.0x14mm) is the type scerw that should be used (do not use
longer screws or the monitor may be damaged).
1. Before mounting the monitor, remove the base riser (vertical portion of the base) by
removing the four screws near the top with a screwdriver. Then the base and the
riser can be removed. In order to prevent losing these screws, we suggest replacing
the screws in their original holes.
2. Attach the VESA mounnt ((0E-32MON720P (200mm x 100mm)0E-43MON1080
(200mm x 200mm)) plate to rear of the monitor and follow all of the instructions
provided with the mount to complete the mounting process.
CAUTION The wall mount must bear a minimum of ve times the
monitor’s net weight. To mount your MONITOR to the wall or
another surface,you need to purchase a VESA wall mount.Use four
( 32”43”HMФ6.0x14mm screws (the base attachment screws
removed in step 1 below are(32”43”HMФ6.0x14mm)to attach
the mount. The monitor mount VESA hole pattern is
((0E-32MON720P(200mmx100mm)
0E-43MON1080(200mmx200mm)
0E-43MON1080

12
Accessories
Power Indicator / Modes of Operation
LED Indicator
LED is off when power is off, LED glows blue when power is on, LED glows red when
monitor is sleep/standby model. The power management feature of the monitor is
designed for security surveillance applications. When there is no video, the monitor
remains ON to be instantly ready to display video when the source is changed or if a PC
changes state from sleep/standby to active mode. A floating “No Signal” box moves
slowly across the screen until video is restored.
IR Remote Control
Qty: 1
Qty: 2
User Manuals
Qty: 2
AAA Batteries
Qty: 2
Base of Stands
Screws Type:
32”/43” BT Ф4.0x10mm Qty: 4
Screws for Installing Monitor Stand
MUTE
ME NU SOU R C E
HD M I
VGA
AV
Power Cable
Qty: 1
Qty: 1
HDMI Cable
Screws Type: 32”/43” HMФ6.0x14mm
Qty: 4
Screws for Mounting Monitor

Dimensions
Model
Dimension mm inch mm inch
0E-32MON720P
Letter
A Width of monitor body 732
Height of monitor bodyB
C
D
E
F
G
H
I
J
K
A
E
F
G
H
C
I
B
D
J
K
0E-43MON1080
13
28.8 972.5 38.2
434 17 566 22
45.9 1.8 47.1 1.85
474.6 18.7 608.2 23.9
684.2 26.9 913.5 35.9
195.5 7.7 211.2 8.3
701.8 27.6 942.9 37.1
396.4 15.6 531.1 20.9
11.2 0.44 11.5 0.45
17.3 0.68 14.5 0.57
9.5 0.37 9.4 0.36
Depth of monitor body
Height of monitor on base
Width of base
Depth of base
Width of viewable area
Height of viewable area
Thickness of monitor
Bottom bezel width
Side bezel width

14
Specifications
Model 0E-32MON720P 0E-43MON1080
Screen Diagonal Dimension (inches)
Viewable Area W x H (inches)
32”
27.4 x 15.4
0.510 x 0.510 0.4902 x 0.4902
DLED
1080
37 x 20.8
43”
Led Type
Pixel Pitch (mm)
Display Resolutions 1920 x 10801366 x 768
60Hz
Up to 1080p, downward compatibleSupported Input Resolutions
Refresh Rate
16.7M
500400
16:9
Color Depth
Brightness (cd/m²）
Monitor Aspect Ratio
Display Aspect Ratio OSD selectable 16:9 or 4:3
Horizontal TV Lines
Contrast Ratio 1200:1SCR
720
1100:1SCR
Response Time (ms) 9 (GTG) 8 (GTG)
View Angle H/V (degrees) 178°x 178°/CR＞10
Digital Video Inputs
Analog Video In/Out VGA up to 1920 x 1080
HDMI up to 1920x1080
VGA up to 1366x768
1x3.5mm mini-jack
2 x10
75W Typical
28.8”x17”x2.9”
(732 ×434×74.9mm)
28.8”x18.6”x7.7”
(732×474.6×195.6mm)
(972.5×566×86.4mm)
38.2”x22.2”x3.4”
(972.5×680.2×211.2mm)
38.2”x26.7”x3.8”
200x100
9.9Ibs(4.5 Kg) 16.4Ibs(7.45 Kg)
25.1Ibs(11.4Kg)14.9Ibs(6.8 Kg)
200x200
110W Typical
＜0.5
Matte black
Plastic
Yes
-5°~15°
AC 100-240V~50/60Hz 1.8AAC 100-240V~50/60Hz 1.1A
0°C~40°C / 32℉~104℉
-20°C~50°C / -4℉~122℉
10~90%
CO-AXIAL OUT, HDMI, VGA, AUDIO IN, YPBPR, VIDEO (IN/LIN/RIN) AUDIO IN, USB, AUDIO OUT
Power Cable, IR Remote Control, AAA Batteries, Screws, Base Of Stands, User
Manuals, HDMI Cable
CE/FCC/ROHS/HDMI/UL/WEEE/REACH
Audio In/Out (stereo)
Speakers (W)
Stand-by (W)
Power Consumption
Monitor Body Dimensions
Dimension Monitor + Stand
Panel Surface
Case & Stand Material
VESA Mounting Pattern (mm)
Base/Stand Included
Base/Tilt Angle
Weight Cabinet Only
Weight Cabinet + Base Stand
Power Supply (internal)
Operating Temperature
Storage Temperature
Operating Humidity
Accessories
Rack Mount Screw Size (mm)
Certifications
Warranty 30 Months
16/7/365Operation Mode
Interface
Screw For Mounting Monitor, Screws Type: 32”,43”HMФ6.0x14mm/4pcs
Screw For Base Of Stands Monitor, Screws Type: 32”,43”BTФ4.0x10mm/4pcs

15
Limited Warranty
1. Limited Warranty
A. General
Subject to the terms and conditions of this Limited Warranty, from the date of sale
through the period of time for product categories specified in Section 1(b), ADI warrants
its W Box Technologies products to be free from defects in materials and workmanship
under normal use and service, normal wear and tear excepted. Except as required by
law, this Limited Warranty is only made to Buyer and may not be transferred to any third
party.
ADI shall have no obligation under this Limited Warranty or otherwise if:
(I) The product is improperly installed, applied or maintained;
(II) The product is installed outside of stated operating parameters, altered, or
improperly services or repaired;
(III) Damage is caused by outside natural occurrences, such as lightning, power
surges, fire, floods, acts of nature, or the like.
(IV) Defects resulting from unauthorized modification, misuse, vandalism, or other
causes unrelated to defective materials or workmanship, or failures related to
batteries of any type used in connection with the products sold here under.
ADI only warrants those products branded as W Box Technologies products and sold by
ADI. Any other products branded by third parties are warranted by the third party
manufacturer for a period as defined by the third party manufacturer, and ADI assigns to
Buyer those warranties and only those warranties extended by such third party
manufacturers or vendors for non-ADI branded products. ADI does not itself warrant any
non-ADI branded product and sells only on an as is basis in accordance with ADI’s
terms and conditions of sale.

16
B. Specific Warranties for Product Categories
2. Exclusion of Warranties, Limitation of Liability
THERE ARE NO WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, OF
MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE,
WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. TO THE
FULLEST EXTENT PERMITTED BY LAW, IN NO CASE SHALL ADI BE LIABLE TO
ANYONE FOR ANY (I) CONSEQUENTIAL, INCIDENTAL, INDIRECT, SPECIAL, OR
PUNITIVE DAMAGES ARISING OUT OF OR RELATING IN ANY WAY TO THE PRODUCT
AND.OR FOR BREACH OF THIS OR ANY OTHER WARRANTY OR CONDITION,
EXPRESS OR IMPLIED, OR UPON ANY OTHER BASIS OF LIABILITY WHATSOEVER,
EVEN IF THE LOSS OR DAMAGE IS CAUSED BY ADI’S OWN NEGLIGENCE OR FAULT
AND EVEN IF ADI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES OR
DAMAGES.
Product Categories Warranty
CCTV Power Supplies 24 months
CCTV Monitors 30 months
Semi Commercial Monitors 24 months
Video Baluns 30 months
Analog Cameras 36 months
DVR’s, NVR’s (excluding HDD) 60 months
IP Cameras 60 months
Racks 60 months
TV Mounts 60 months
Analog Cables Limited Lifetime
B Connectors Limited Lifetime
Extension Cords Limited Lifetime
HDMI Cables Limited Lifetime
Jacks, Cords and Intrusion Limited Lifetime
Patch Cables Limited Lifetime
Wire Ties Limited Lifetime

17
Any product description (whether in writing or made orally by ADI or ADI’s agents),
specifications, samples, models, bulletin, drawings, diagrams, engineering sheets, or
similar materials used in connection with the Buyer's order are for the sole purpose of
identifying ADI's products and shall not be construed as an express warranty or condition.
Any suggestions by ADI or ADI's agents regarding use, applications or suitability of the
products shall not be construed as an express warranty or condition unless confirmed to
be such in writing by ADI. ADI does not represent that the products it sells may not be
compromised or circumvented; that the products will prevent any personal injury
or property loss by burglary, robbery, fire or otherwise, or that the products will in all cases
provide adequate warning or protection. Buyer understands and will cause its customer to
understand that a properly installed and maintained product is not insurance or guarantee
that such will not cause or lead to personal injury or property loss. CONSEQUENTLY ADI
SHALL HAVE NO LIABILITY FOR ANY PERSONAL INJURY, PROPERTY DAMAGE OR
OTHER LOSS BASED ON ANY CLAIM AT ALL INCLUDING A CLAIM THAT THE
PRODUCT FAILED TO GIVE WARNING. However, if ADI is held liable whether directly or
indirectly for any loss or damage with respect to the products it sells, regardless of cause or
origin, its maximum liability shall not in any case exceed the purchase price of the product,
which shall be fixed as liquidated damages and not as a penalty and shall be the complete
and exclusive remedy against ADI.
FOR THE AVOIDANCE OF DOUBT, ADI DOES NOT SEEK HEREUNDER TO EXCLUDE
OR RESTRICT ITS LIABILITY IN RELATION TO (I) FRAUD, (II) DEATH OR PERSONAL
INJURY DIRECTLY RESULTING FROM ITS NEGLIGENCE OR (III) ANY MATTER IN
RESPECT OF WHICH, BY LAW, IT IS NOT PERMITTED TO RESTRICT ITS LIABILITY.
3. Limitation on Liability to Buyer’s Customers
Buyer agrees to limit liability to its customers to the fullest extent permitted by law. Buyer
acknowledges that ADI shall only be deemed to give consumers of its products such
statutory warranties as may be required by law and at no time shall Buyer represent to its
customers and/or users of ADI products that ADI provides any additional warranties. By
accepting the products, to the fullest extent permitted by law, Buyer assumes all liability for,
and agrees to indemnity and hold ADI harmless against and defend ADI from, any and all
suits, claims, demands, causes of action and judgments relating to damages, whether for
personal injury or to personal property, suffered by
any person, firm, corporation or business association, including but not limited to, Buyer's
customers and/or users of the products because of any failure of the products to detect
and/or warn of the danger for which the goods were designed or any other failure of the
products whether or not such damages are caused or contributed to by the sold or joint
concurring negligence or fault of ADI.

18
4. Returns
Subject to the terms and conditions listed below, during the applicable warranty period,
ADI will replace Product or provide a credit at purchase at its sole option free of charge
any defective products returned prepaid. Any obligations of ADI to replace Limited
Lifetime warranty products pursuant to this warranty which result from defect are limited
to the availability of replacement product. ADI reserves the right to replace any such
products with the then currently available products, or provide a credit in its sole
discretion. In the event Buyer has a problem with any ADI product, please call your local
ADI branch for return instructions:
WWW.WBOXTECH.COM
Be sure to have the model number and the nature of the problem available. In the event of
replacement, the return product will be credited to Buyer's account and a new invoice
issued for the replacement item. ADI reserves the right to issue a credit only in lieu of
replacement.
If any WBox Technologies product is found to be in good working order or such
product's inability to function properly is a result of user damage or abuse, the
product will be returned to Buyer in the same condition as received and Buyer shall
be responsible for any return freight changes.
5. Governing Law
This Limited Warranty shall be governed by the laws of England and Wales.
6. Miscellaneous
Where any term of this Limited Warranty is prohibited by such laws, it shall be null and void,
but the remainder of the Limited Warranty shall remain in full force and effect.

0E-32MON720P
0E-43MON1080
wboxtech.com
Tech Support
#833-574-9124(Option2)
[email protected]
58
4 0 0 4 9 3 0 1 2 4
98
4 0 0 4 9 3 0 3 4 0