Webb WEBC26 User manual

Sales & Support: 01793 333212
Please read & understand this manual, paying particular attention to the safety instructions, before use.
The manufacturer reserves the right to change the product specifi cation and livery according to continues product improvements.
Operator’s Manual
26cc Loop Handle
Petrol Brush Cutter
WEBC26
193866002
33cc Cow Horn Handle
Petrol Brush Cutter
WEBC33
193871002
43cc Cow Horn Handle
Petrol Brush Cutter
WEBC43
193872002


CONTENTS

SAFETYINSTRUCTIONS
SPECIFICATIONS
COMPONENTS
ASSEMBLY
OPERATION
FUELLING
MAINTENANCE,CLEANING&STORAGE
TROUBLESHOOTING
PARTSDIAGRAM&LIST
DECLARATIONOFCONFORMITY



SAFETYINSTRUCTIONS
Readandunderstandtheowner’smanualandlabelsaffixedtothemachine.Learnitsapplicationand
limitationsaswellasthespecificpotentialhazards.Retaintheseinstructionsforfuturereference.The
operatorisresponsibleforfollowingthewarnings&instructionsinthismanualandontheproduct.


Read&understandoperator’s
manualbeforeusingthe
machine.Failuretofollow
instructionscouldresultin
deathorseriousinjury.

Thisgraphicandwhen
accompaniedbyWARNINGor
DANGER,callsattentionto
actionswhichcouldleadto
SERIOUSINJURY

Alwaysweareyeandear
protection

Alwaysturnofftheengine,
ensuringthecuttingtoolhas
stopped,beforecleaning,
removingoradjustingthe
blade.

Sharprotatingblades
Alwayswearglovestoprotect
yourhands.
Wearfootprotectionor
sensibleshoeswhenusingthe
machine

Nevermodifyamachineinany
way.Incorrectuseofa
machinecancauseseriousor
fatalpersonalinjury.

15m 
Keepallbystanders&animals
atleast15metresawayfrom
themachineduringoperation.
Ifapproached,stopthe
machineimmediately.

Nosmoking

RiskofCarbonMonoxide
Poisoning.Ensureworkingarea
iscorrectlyventilated.

Donotusenearaflame,or
sparks

FireRisk
Fireanditsvaporsare
extremelyflammable&
explosive.Fireorexplosioncan
causesevereburnsordeath.

MovingParts
Rotatingpartscancontactor
entanglehands,feet,hair,
clothingoraccessories.
Traumaticamputationor
severelacerationcanresult

HotSurface.
Runningenginesproduceheat.
Engineparts,especiallythe
exhaust,becomeextremely
hot.Severethermalburnscan
occuroncontact

DANGER
Indicatesanimminently
hazardoussituationwhich,if
notavoided,willresultin
seriousinjury.

WARNING
Indicatesapotentially
hazardoussituationwhich,if
notavoided,couldresultin
seriousinjury

CAUTION

Indicatesapotentially
hazardoussituationwhich,if
notavoided,mayresultin
minorormoderateinjury.
CAUTION
Usedwithoutthesafetyalert
symbolindicatesapotentially
hazardoussituationwhich,if
notavoided,mayresultin
propertydamage.







INSTRUCTION MANUAL


STAYALERT 
Donotoperatethemachinewhileundertheinfluenceofdrugs,alcohol,oranymedicationthatcouldaffect
yourabilitytouseitproperly.Donotusethismachinewhenyouaretiredordistractedfromthejobathand.
Beawareofwhatyouaredoingatalltimes.Usecommonsense.
AVOIDDANGEROUSCONDITIONS
Makesurethereisadequatesurroundingworkspace.Clutteredareasinviteinjuries.Keepyourworkareaclean
withsufficientlight.Keepareaaroundthemachineclearofobstructions,stones,sticks,wiresandotherdebris
orforeignbodieswhichcouldcausedamagetothemachine.DONOTSMOKE,whilstusingthemachine.
INSPECTYOURMACHINE
Checkallbolts,nuts,andscrewsfortightnessbeforeeachuse,especiallythosesecuringguardsanddrive
mechanisms.Vibrationduringusemaycausethesetoloosen.Replacedamaged,missingorfailedpartsbefore
using.Warninglabelscarryimportantinformation.Replaceanymissingordamagedwarninglabels.
DRESSPROPERLY
Donotwearlooseclothing,gloves,scarfs,necktiesorjewellery(rings,wristwatches),whichcanbecaughtin
movingparts.ALWAYSwearprotectiveeyeandearwear.Appropriateglovesarealsorecommended.
Wearprotectivehaircoveringtocontainlonghair,preventingitfromgettingcaughtinmachinery.
DONOTusewhilstbarefootorwearingopentoedfootwear.Safetyfootwearshouldbewornatalltimes.
KEEPBYSTANDERSANDCHILDRENAWAY
Keepunauthorisedpersonsoranimalsaminimumdistanceof15metresawayfromthemower.Donotallow
childrentohandleorusethemachine.
DONOTOVERREACH
Keepproperfootingandbalanceatalltimes,particularlyifusingonslopes.Themachineshouldnotbeused
onsteepslopesandalwaysbesureoffooting.
AVOIDINJURYFROMUNEXPECTEDACCIDENT 
Keephandsoutofthewayofmovingparts,particularlytheengineandrotatingcuttingtool.
DONOTFORCETOOL 
Alwaysworkwithintheratedcapacity.Donotusethemachineforapurposeforwhichitwasnot
intended.Alwaysusethecorrecthandlesandshoulderstrapsprovidedwiththemachine.
MAINTAINYOURMACHINEWITHCARE 
Cleanthemachineimmediatelyafteruse.Keepthemachinecleantoensureitoperatestoitsfullandsafest
performance.Whenmaintainingthismachine,onlythemanufacturer’soriginalreplacementpartsshouldbe
used.Theuseofnon-originalmanufacturerpartsmayinvalidateyourwarranty.
STOREIDLEEQUIPMENT
Whennotinuse,themachineshouldbestoredinadrylocation.Keepthemachineawayfromchildrenand
othersnotqualifiedtouseit.DONOTSTOREFUELINTHEMACHINE,fuelover30daysoldcanbecomestale
andifused,damagethecarburetor,whichisnotcoveredbythemanufacturer’swarranty.




SPECIFICATIONS
ModelWEBC26WEBC33WEBC43
ProductNumber193866002 193871002 193872002
Engine(cm3) 25.432.6 42.7
IdleSpeed(r/min)280028002800
CarburetorDiaphragmDiaphragmDiaphragm
FuelTankCapacity(Litre)0.450.700.80
FuelRatio
(UnleadedPetrol:2Stroke
SyntheticOil)
40:140:140:1
Blade255mm3-blade255mm3-blade255mm3-blade
NylonLineDiameter(mm)2.5mm2.5mm2.5mm
Weight(kgs)N.W6.5-G.W9.2N.W7.0-G.W10.4N.W7.7-G.W11.5

Themanufacturerreservestherighttochangetheproductspecificationandliveryaccordingtocontinued
productimprovements.

















INSTRUCTION MANUAL


COMPONENTS








1. Blade
11.PrimerBulb
2. Driveshaft
12.ChokeLever
3. ThrottleTrigger
13.Guard/Shield
4. IgnitionSwitch
14.Knife
5. SafetyLever
15.EasyLoadHead
6. CowHornHandle
16.D-Handle
7. HarnessEyelet
17.HarnessAssembly
8. AirFilterCover
18.IgnitionSwitch
9. FuelTankCap
19.SafetyLever
10. FuelTank
20.ThrottleTrigger
WEBC33/43
WEBC26


ASSEMBLY
Removethemachineandcontentsfromthecarton.Besurethecartonisemptybeforediscarding.
Ifyourequireanyassistancewithregardstothecontentsofthelawnmowercontactus:
Tel:01793333212orEmail:[e-mail]
Mon–Fri8.00am–5.30pm(excl.BankHolidays)

FITTINGGUARD/SHIELD
1. Installthesafetycoverontotheshaftwiththesafetycoverbracket.
2. Alignthefourscrewsofthecoverwiththesafetycoverbracket
3. Tightenthescrewsaftersettingthesafetycoverbracketattheappropriateposition.
 


FITTINGTHEHARNESS
1. Placetheclaspoftheharness,throughtheHarnessEyeletlocatedonthedriveshaft
2. AdjusttheHarness,ensuringitiscomfortable,buttightenoughtoallowyoutooperateappropriately.

FITTINGNYLONLINECUTTINGHEAD
1. AlignholeinadapterplatewithholeintheshaftandinstallAllenKey(lockingtool).
2. Threadcutterheadontoshaft(turningitanti-clockwise)untilitistight.RemoveAllenKey.

INSTRUCTION MANUAL


FITTINGCOWHORNHANDLES(WEBC33&WEBC43)
1. Installhandleonlowerbracket.
2. Positionhandleinacomfortableoperating
position
3. Fitupperbracket.
4. Tightenthefourfixingscrews.


FITTINGD-HANDLE(WEBC26Only)
1. Placetophandleontodriveshaft.
2. Positionlowerhandle,beneaththetophandle
inacomfortableoperatingposition
3. Tightenthefourfixingscrews.


FITTINGTHEMETALBLADE
1. InstallholderA,theblade,holderB,tooth
washer,inthisorder
2. Thenclampwiththeleft-handthreadnut.
3. AlignholeofgearcaseandholderA,andinsert
AllenKey.
4. Rotatelefthandthreadnutwithspannerin
clockwisedirectionuntilsecurelytightened.
5. InstalltheSplitPin2×16andsplitlegstosecure.


REPLACINGYOURNYLONLINE
1. Cut3metresof2.5mmdiameterNylonLine.
2. Alignthearrowsonthefeed/bumpknobwith
theeyelets.
3. Feedthelineintothefeedpipe(supplied).
4. Feedthefeedpipe&lineinthroughthefirst
eyeletandoutofthesecondeyelet.
5. Removethefeedpipeandputinasafeplace.
6. Pullthenylonlineuntilyouhavetwoequal
lengths.
7. Nowrotatethefeed/bumpknobCLOCKWISE,to
windthenylonlineintothehead.
8. Stopwhenyouhave150mmofnylonline
protrudingfrombotheyelets.
 


WARNING
Excessivevibrationofthemetalbladeindicatesithasnotbeeninstalledcorrectly.
Stoptheengineimmediately,checkthebladeinstallationandre-installcorrectly.Anincorrectlyinstalledblade
cancauseinjury.


NylonHead
NylonLine
FeedPipe


OPERATION

DANGER
Alllinetrimmers&brushcutterscanthrowsmallstones,metalorsmallobjectsaswellasmaterialbeingcut.
DonotallowanyonetoentertheoperatingDANGERZONEwithyou.Thedangerzoneisanarea15metresin
radius.InsistthatpersonsintheRISKZONEbeyondthedangerzoneweareyeprotectionfromthrownobjects.
Iftheunitmustbeusedwherethereareunprotectedpeople,operateatalowthrottlespeedtoreducethe
riskofthrownobjects.

DANGERZONEWITHIN15METRES-RISKZONEGREATERTHAN15METRES

GENERALUSE

WARNING
Priortousingthemachine,ensureallhardware(bolts,screws&nuts)aresecurelytightened.
• Operatethetriggerwithyourrighthand&holdtheD-Handlewithyourlefthand.(WEBC26Only)
• Operatethetriggerontherighthandleandholdthelefthandleforstability(WEBC33&WEBC43)
• Thetriggerincreases&decreasesthepowerfromtheenginetotherevolution/reciprocationofthe
attachment.

WORKINGPLAN
• Limittheamountoftimetheproductisusedcontinuouslytoamaximumof40minutespersession.
• Leavethemachinetorestbetweensessionsforbetween10-20minutes.
• Totalamountofworkperformedperdaywiththemachine,shouldbelimitedto120minutesmaximum.
• Continuoususeofthemachinecancause“RepetitiveStressInjury(RSI)”.Ifyoufeeldiscomfort,rednessor
swellingofyourhandsandfingersoranyotherbodypart,consultyourdoctor.
• Checklocalregulationsforsoundlevelandhoursofoperationconstraints.
• Nevertransportthemachinewhilsttheengineisrunning.













INSTRUCTION MANUAL