websense V5000 G2 User manual

c
Quick Start Guide
Websense V5000 G2
Web Security
Bezel (faceplate)
To rack the V5000 G2 appliance, use a rack tray (not included).
1. Obtain a rack tray and install into desired server rack.
2. Place appliance on tray
and secure to server rack
using mounting screws on
front of appliance.
Getting Started Guide
www.websense.com/library/
Also available on the Documentation disk.
Online Support and Contact Information
www.websense.com/support/
Serial Port Connection Keyboard/Monitor Connection
Connect a computer to serial port using null
modem cable (provided). Or, connect a terminal
server to serial port using a straight-through
cable (not provided).
Serial port settings: 9600 baud, 8 bits, no parity
Connect a monitor and keyboard to appliance,
either directly or through a KVM (keyboard/
video/mouse) switch.
1. Plug power cable into an appropriate power source.
2. Press power button on front of appliance (a).
3. Check the following indicators:
a) Power button is illuminated (front).
b) System status indicator is solid blue (front).
c) LEDs for connected interfaces (NICs) are illuminated (back).
1. Insert right tab into slot on appliance.
2. Press left tab in firmly until bezel snaps into place.
3. Appliance can be locked using keys included with bezel.
(optional)
Contact Websense Technical Support if any indicators are not illuminated correctly.
Cat 5E cables (or better) are required. Do not use crossover network cables.
Plan your deployment before setting up the appliance. See the
back of this guide for a deployment overview and reference sheet.
1. Appliance Command Line: Configure the integration method
and Appliance Controller interface (C) via firstboot script.
2. Logon Portal: Access Logon Portal via browser to perform
remaining tasks.
3. Appliance Manager: Configure NTP servers/system time,
Network Agent interface (N), and all other necessary
settings.
4. TRITONTM - Web Security: Enter subscription key, update
Master URL Database, configure Network Agent and
customize policies. Windows Server® 2003/2008 required
for Log Server and optional components.
See the V5000 G2 Web Security Getting Started guide online
for detailed instructions.
Power Cable
Recovery Disk Documentation Disk Ethernet Cables (4)
Null Modem Cable
Accessory Kit
OR
a
b
Support & Resources
4
2
5
6
7
3
1
Connect Input Device
Rack Installation
Power On Appliance
Install Bezel (optional)
Configuration Overview
Connect Network Cables
Verify Contents
Before you begin...

Deployment Reference SheetAppliance Deployment Overview
You can deploy one or more appliances on your network. The diagram below illustrates a basic appliance deployment. A
separate computer with Windows Server® 2003/2008 is required for running Log Server and Microsoft SQL Server®. See
the Getting Started guide for details.
* Connect the N interface to a span, monitor, or mirror port on the switch.
Internet
Firewall
Clients
Windows Server 2003/2008
Router
*Switch
Network Configuration
Network Agent Interface (N)
Hostname:
IP Address: Primary DNS:
Subnet Mask: Secondary DNS:
Appliance Controller Interface (C)
IP Address: Primary DNS:
Subnet Mask: Secondary DNS:
Default Gateway: Tertiary DNS:
Default Gateway: Tertiary DNS:
Additional Components
Policy Server IP:
Log Server IP:
Subscription Key:
IP Address:
Password:
User Name:
SQL Server
Logon Information
C interface IP Address
Logon Portal URL:
Default User Names
Appliance Manager: admin
TRITON - Web Security: WebsenseAdministrator
Unified password is set during firstboot script.
http://