Wecan WKY-575A User manual

TheinstructionsofMovingHead
WKY-575A
Wecan Science and Technology Light CO.,LTD
HTTP://WWW.WECANLIGHT.COM

guaranteecertificate
Name MovingHead Packing Poly foam Carton
Model WKY-575A Size
Relese
Date Attachment
Importer’s
ADD Weight
Signature
of QC Remarks With Lamp
Email [email protected]
1Breakdown
explanation 2
1Remarks of
Maintain 2
1 The deadline of free maintaince is within
1
y
ear since the date of shipin
g
the
g
oods.but
If damaged deliberately,crust be out of
shape breakage of lantern or light source
Is of our maintaince scope ,and the place of
maintaince is limited in factory.
guarantee
Instruction 2 The product maintenance depend on this
Or we will charge your money. Please fill
In this table send to us with lighting
products when you need to maintain.

ONE: Voltage：220V，60HZ
Rated Power Consumption：750W
Lamp：HMI575W
Control Signal： DMX512conntrol
Channels：16CH
Color：Bi-color plate，with 14colors and white light
Gobos：，Bi-gobos plate ,8 gobos white light
Pan rotating：540°
Tilt rotating：270°
Packing size：528*450*805mm
Weight：36kg
Safeguards: The heat radiate by 5 blower with 12v/12*12.Cut the power if the
temperature of switch is 175..the fuse breake if electric current reach
To10A.
TWO: Channel Control
CH1. Iris
CH2.color
CH3.color
CH4.shutter
CH5.Xaxis:
CH6.Yaxis:
CH7Xaxisbit
CH8.Y axis bit:
CH9.X/Y axis micro step:
CH10.Repleceable gobos
CH11. Rotating gobos
CH12. Gobos rotation:
CH13. focus:
CH14. rotating prism:
CH15. prism rotating:
CH16. reset
CH1
光圈
大光束变化 小
0 127 255
0~24 25~49 50~74 75~99 100~124 125~149 150~174 175~199 200~255CH2
色盘 1 白光 红色 黄色 蓝色 绿色 紫色 橙色 粉红 流水
0~34 35~69 90~104 105~139 140~174 175~209 210~255CH3
色盘 2 白光 红色 黄色 蓝色 绿色 紫色 颜色流水
0~139 140~247 248~255CH4
频闪 暗------亮频闪,1~11 次/秒开光
CH5
X轴
0度220度540度
0 127 255
CH6
Y轴
0度140度280度
0 127 255
CH7
X微调
0度0.9度1.8度
0 127 255
CH8
Y微调
0度0.9度1.8度
0 127 255
CH9
X/Y
0255
水平和垂直旋转速度控制,由快到慢
0~112 113~191 192~255CH10
图案 1 5种图案依次出现 5种单图案抖动效果 图案盘流水运动
0~199 200~255CH11
图案 2 5种可旋转图案依次出现, 图案盘做流水运动
0~128 129~255CH12
图转 图案顺时针旋转+速度控制 图案逆时针旋转+速度控制
CH13
调焦
清晰度调节
0 255
CH14
棱镜
单图案 三棱镜
0 127 255
0~127 129~255CH15
棱转 棱镜顺时针旋转+速度控制 棱镜逆时针旋转+速度控制
0~229 230~240 241~255CH16
自检 空持续 3秒后灯具自检 空

Start address code
Computer
Light number DMX
192controller
DMX
240controller
DMX
512controller
1 1 1 1
2 17（1+16） 21（1+20） 17（1+16）
3 33（1+16+16） 41（1+20+20） 33（1+16+16）
4 49（1+16+16+16） 61（1+20+20+20） 49（1+16+16+16）
5 65（1+16+16+16+16） 81（1+20+20+20+20） 65（1+16+16+16+16）
…… …… …… ……
N N=192÷16=12 N=240÷20=12 N=512÷16=32
THREE:Instructions of liquid crystal screen
System reset
Standard DMX 512 Address
Address choose condition .press “up”and “down”choose to
Enter.Address 001-511
Pan Inver
.press “up”and “down”choose yes and no to Enter.No
Tilt Inver
.press “up”and “down”choose yes and no to Enter.No
System Reset
.press “up”and “down”choose yes and no to Enter.No
Speed Adjust
Press “up”and “down”choose Track 3 to Enter.X&Y Track 0
FOUR: installation.
1, keep flat or Overhead hook.
2,power connect with the earth safely
3,address setting
4,signal line connection
FIVE :pattern paper
SIX: relevant address code setting of other stage lighting :the switch is set through
1-9.,
Code by binary system. number display board is decided by number.,the
confirmation of the start address code has changes according to the used
controller’s model. the following are a few usual coding ways of several models.
In the table: N represent the most computer controlled by the controller.16,20,60
represent that the channels number of the computer controlled by the controller.
If the serial number of the computer light is 2,and the used controller modal is
DMX-192, according to the following table. the start code is 17,hence the position of
the address is as follows.
17=1+16,to use binary system express is 10001,comply with the front picture.
SEVEN: matters need attention
a) a) there can not be inflammable substance and restricted freight
b)it must has safe line to protect when hang the lamps downward.
b) b) use steady 220V voltage and connect with protection power switch.
c) c) when use the lamps for the second time, the using time can not less than 15
minutes. the lamps can become bright after temperature becoming down.
d) d) Stop use that lamps ,when it does not work in the course of operation. avoid
working for a long time in bad condition.
e) e) Exam the radiating blower regularly .
f) f) When change the lamps, your hand can not touch the glass part of the lamps.
If touch it out of carelessness, please wash your hand with alcohol
a) our of control: 1)exam the signal and connection , short circuit 2)address
code
EIGHT: protection
a) a) exam the lamps and see if the screw is flexible regularly.
b) b) Clear the dusty and garbage regularly.
Nine: trouble clearing
b) lamps off: 1)if power is connecting 2)if the fuse is bad. 3)if the
lamps’ lifespan
If the line become loose. 5) trigger is bad.
Special advice:
Do not removal any part of the lamps in you are not a professional person, please contact
the after sales service department of my company if you need to mend the light
ON
12345678910
1 2 4 8 16 32 64 128 256 TEST