Well THERMS-THERMALWP-WL User manual

Heating Room Thermostat THERMS-THERMALWP-WL
Features
•Heating thermostat
•2*AAA battery power supply
•5+1+1 programmable
•Surface mounting.
•RF 868Mhz
•Wireless Distance: 120m in open space
•CE, ROHS，RED approved
Technical Data
Display and buttons
Power Supply - 2*AAA battery
Backlight - White
Receiver Load current - Max 10A
Sensor - NTC 10K
Set Point Range - 5~30℃
Accuracy - ± 1℃(step control by +0.5℃)
Ambient - 0~50℃
Protection Class - IP30
Relative Humidity - 85%
Housing - ABS + PC
Up Button
Mode Select Button
On/off Button
Room Temp.
Set Temp.
Heating Icon
Weekday
Clock
PRG Button
Programmable mode
Manual mode
Down Button
Current PRG period

Heating Room Thermostat THERMS-THERMALWP-WL
Clock & weekday setting
Press and hold Mbutton for 3s, set the clock and weekday by pressing +and -button, each press of M
button will go to next item setting.
Mode select
1）Press Mbutton to select the Programmable mode, the thermostat will work according to the pre-set
programmable schedule.
2) Press Mbutton again to shift to MAN mode, set temperature by pressing +or -button, then thermostat will work
according to manual setting.
5+1+1 programmable setting (4 periods/day)
Press and hold Pbutton for 3s to enter program setting.
Set the schedule (Weekday-Period-Start time-Temp.) by pressing up and down button, each press of Pbutton
will go to next item setting.
Temperature Calibration Range: -8 °C~8°C
Press on/off button to turn off thermostat, then press on/off button for 3 seconds, set the value by pressing
+or –button.
Code pairing
Menu
Description
01
Clock setting- Minute
02
Clock setting- Hour
03
Weekday setting
Monday to Friday
Saturday
Sunday
Period
1
2
3
4
1
2
3
4
1
2
3
4
Time
6:30
8:00
18:00
22:30
8:00
10:00
18:00
23:00
9:00
12:00
19:00
0:00
Temp.
21°C
18°C
21°C
16°C
21°C
21°C
21°C
16°C
23°C
21°C
16°C
21°C
code pairing button
Heating on indicator (LED 1)
Power supply indicator (LED 2)
On/off button

Heating Room Thermostat THERMS-THERMALWP-WL
1) Long press the code pairing button on the receiver until LED 1 is flickering quickly.
2) Turn off thermostat, and long press Mbutton until the code shows on the screen, then press M button again.
3) Wait for while, LED 1 stop flickering. Code pairing finished.
Wiring Diagram
Dimensions
Transmitter: Receiver:

Heating Room Thermostat THERMS-THERMALWP-WL
Installation
(1) Mounting Method:
(2) Put on desk
Receiver
Installation:
Waste electrical and electronic equipment are a special waste category, collection, storage, transport,
treatment and recycling are important because they can avoid environmental pollution and are
harmful to health. Submitting waste electrical and electronic equipment to special collection centers
makes the waste to be recycled properly and protecting the environment. Do not forget! Each electric
appliance that arrives at the landfill, the field, pollutes the environment!
Importer & distributor:
SC VITACOM ELECTRONICS SRL
CIF: RO 214527
Tel. [phone]*
[e-mail], www.vitacom.ro