WENPOD X1 User manual

QUICK START GUIDE
X1
1. Flip open the charging port
cover and insert the mini USB
cable into the charging port.
Plug the other end to your
computer USB port or any
USB charging device of 1A.
2. When finished charging,
unplug the cable and cover
the charging port with the
cover.
This quick start guide is designed for a first time user. Please refer to the full user guide for more detailed information.
A. CHARGE BATTERY B. INSTALL MOUNTING - install X1 on your desired GoPro mount
Bike mount Helmet mount
Wearable mount Selfie stick mount

WWW.WENPOD.COM
WENPOD is a registered trademark of Gazercam Limited
C. INSTALL SMARTPHONE OR ACTIONCAM
For Smartphone
Slide open 2 side
clip, and slide the
phone onto the clip
as shown.
For Actioncam
Slide open 2 side clip, and flip down the
support at the bottom. Slide the
actioncam with the transparent
protective case onto the clip as shown.

IMPORTANT: When Power on, please hold the device with one hand and hold the motor with the other hand.
WWW.WENPOD.COM
WENPOD is a registered trademark of Gazercam Limited
C. POWER ON / OFF
Power on
Hold the device with both hands as shown.
Press brieftly the RED power botton on the side ONCE
to turn on.
Power off
Press brieftly the RED power button on the side TWICE
to turn off.